WEDM

System 3R compatible MaxxMacro Drawbar Automatic 60514 Stainless Performance comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

System 3R compatible MaxxMacro HP Automatic 60514 Drawbar is 100% cross compatible with System 3R Drawbar 3R-605.14E 3R-605.14 Macro Combi.

System 3R compatible MaxxMacro HP Automatic 60514 Drawbar includes the plastic clip, flushing o-ring and are machined ABCD all locations for precision seating of pallet. Junior interface for gripper and magazine for automation. This is designed to work the same as System 3R compatible MaxxMacro HP Automatic 605 Drawbar Stainless

• 100% cross compatible with System 3R Macro Tooling Systems 3R-605.14E 3R-605.14
• Sold in Sets of 4

Product Details:

System 3R compatible MaxxMacro Drawbar Automatic Low Profile 60510W Stainless comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

System 3R compatible MaxxMacro 60510W Low Profile Drawbar is 100% cross compatible System 3R Drawbar 3R-605.10 WEDM Drawbar Macro.

System 3R compatible MaxxMacro 60510W Lowprofile Drawbar includes the plastic clip, flushing o-ring and are machined ABCD all locations for precision seating of pallet.

100% cross compatible with System 3R Macro Tooling Systems 3R-605.10

Product Details:

System 3R compatible MaxxMacro Drawbar Long Automatic 605 Stainless comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

System 3R compatible MaxxMacro Automatic 605 Drawbar is 100% cross compatible with System 3R and is a upgrade to 3R Drawbar 3R-605.1 3R-605.1RS Automatic Drawbar.

System 3R compatible MaxxMacro Automatic 605 Drawbar includes the plastic clip, flushing o-rings and are machined ABCD all locations for proper fit on toolchanger fingers and precision seating of pallet.

100% cross compatible with System 3R Macro Tooling Systems 3R-605.1E; 3R-605.1; 3R-605.1EE; 3R-605.1RS; 3R-605.4

Product Details:

System 3R compatible MaxxMacro Drawbar Macro Combi 40516 Stainless comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

System 3R compatible MaxxMacro Drawbar Macro Combi 40516 Stainless is 100% cross compatible with System 3R Drawbar 3R-405.16E Macro Combi Drawbar

System 3R compatible MaxxMacro Drawbars includes the plastic clip, flushing o-rings and are machined ABCD all locations for proper fit on toolchanger fingers and precision seating of pallet.

100% cross compatible with System 3R Macro Tooling Systems 3R-405.16E 3R-405.16 3R-405.16EE

Product Details:

System 3R compatible MaxxMacro Drawbar Macro Junior 40511 Stainless comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

System 3R compatible MaxxMacro Drawbar Macro Junior 40511 Stainless is 100% cross compatible with System 3R 3R-405.11E MacroJunior.

Cross compatible with System 3R Macro Jr Tooling Systems 3R-405.11 3R-405.11E 3R-405.11EE

Product Details:

System 3R compatible MaxxMacro Drawbar Manual 60527 Stainless Performance comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

System 3R compatible MaxxMacro Performance Manual 60527 Drawbar Stainless is 100% cross compatible with System 3R Drawbar 3R-605.27 Macro Drawbar.

System 3R compatible MaxxMacro Performance Manual 60527 Drawbar Stainless includes the plastic clip, flushing o-ring and are machined ABCD all locations for precision seating of pallet.

100% cross compatible with System 3R Macro Tooling Systems 3R-605.27, 3R-605.27E, 3R-605.27RS, 3R-605.27EE.

Product Details:

System 3R compatible MaxxMacro Drawbar Short Manual 6052 Stainless comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

System 3R compatible MaxxMacro 6052 Short Manual Performance Stainless Drawbar is 100% cross compatible with System 3R and is a upgrade to 3R-605.2 series Macro drawbars. This drawbar offers greater stability and is designed to increase precision and productivity, making it the perfect choice for a wide range of industrial applications.

System 3R compatible MaxxMacro Drawbar 6052 Short Manual Stainless includes the plastic clip, flushing o-ring and are machined ABCD all locations for precision seating of pallet.

100% cross compatible with System 3R Macro Tooling Systems 3R-605.2RS 3R-605.2EE 3R-605.2E 3R-605.2

Product Details:

System 3R compatible MaxxMagnum (System 3R) 156 Pallet Stainless Performance Rust Proof comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

System 3R compatible MaxxMagnum Stainless Pallet Ø156 mm Pallet is 100% cross compatible with System 3R Macro Magnum products 3R-681.51-SA Pallet.

Pre-drilled and ready to mount to your existing System 3R compatible MaxxMagnum Pallets.

Rust Resistant unhardened machinable stainless pallet.

100% cross compatible with System 3R Magnum Tooling Systems

Product Details:

System 3R compatible MaxxMagnum (System 3R) 29266HP WEDM Ruler comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Allows using the MXRuler accessories with a System 3R compatible MaxxMacro WEDM mounting head system.

MaxxDesign Exclusive Features:

• High quality materials: Full 440C rust proof design.
• Can be supplemented with MXRuler accessories.
• Mounts on an Mounting Head.

Product Details:

System 3R compatible MaxxMacro 2372 WEDM Holder comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. For fixture, workpiece or MX-2392 Low Profile Holder, MX-2393 Vee Holder, MX-2941, MX-2942 Vice, MX-2946 and MX-4021. Allows using the MXRuler accessories with a System 3R compatible MaxxMacro WEDM mounting head system.

MaxxDesign Exclusive Features:

• High quality materials: Full 440C rust proof design.
• Can be supplemented with MXRuler accessories.
• Mounts on an Mounting Head.

*System 3R compatible MaxxMacro 2372 WEDM Holder shown mounted on: MX-272HP System 3R compatible MaxxMacro Leveling adapter WEDM Dovetail and MX-200209 System 3R compatible MaxxMacro Reference Element WEDM 209mm, with a System 3R compatible MaxxMacro 2942 WEDM Vice.

Product Details:

System 3R compatible MaxxMacro 2328 WEDM Supervise comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• High quality materials: Full 440C rust proof design.
• Vise for mounting rectangular (<60 mm) workpieces in the WEDM system.
• Tightening torque 15 Nm

Product Details:

System 3R compatible MaxxMacro 272HP Leveling adapter WEDM Dovetail comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Details:

System 3R compatible MaxxMacro MX-2665 Fixed mounting head WEDM comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

System 3R compatible MaxxMacro MX-2665 Fixed mounting head WEDM is fully compatible with System 3R ruler system. For mounting SuperVice, a holder or a fixture in the Macro system. Note: All holders including HP can be mounted. Can be adapted to automatic changing. The MX-2665 Fixed mounting head WEDM makes it easy to quickly swap in and out different holders and fixtures for maximum efficiency. With a reliable System 3R compatible MaxxMacro ruler system, you can trust the results of your precision work.

• Recommended maximum load 15 kg
• Adapted to automatic changing
  
• Ready for code carrier
• All holders can be mounted

Product Details:

System 3R compatible MaxxMacro 2921 WEDM SuperVise comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

System 3R compatible MaxxMacro 2921 WEDM SuperVise is 100% cross compatible with System 3R. This makes it easy to perform compound machining operations quickly and accurately. Plus, it enables seamless integration of machining operations with other systems and parts.

System 3R compatible MaxxMacro 2921 WEDM SuperVise for clamping rectangular workpieces up to 77 mm. Mounts on HP, Magnum or MacroTwin leveling adapter. Tightening torque 3 Nm.

Product Details:

System 3R compatible MaxxMacro 2922 WEDM SuperVise comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

System 3R compatible MaxxMacro 2922 WEDM SuperVise is 100% cross compatible with System 3R. This makes it easy to perform compound machining operations quickly and accurately. Plus, it enables seamless integration of machining operations with other systems and parts.

System 3R compatible MaxxMacro 2922 WEDM SuperVise for clamping rectangular workpieces up to 100 mm. Mounts on HP, Magnum or MacroTwin leveling adapter. Tightening torque 3 Nm.

Product Details:

System 3R compatible MaxxMacro 2923 WEDM SuperVise comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

System 3R compatible MaxxMacro 2923 WEDM SuperVise is 100% cross compatible with System 3R. This makes it easy to perform compound machining operations quickly and accurately. Plus, it enables seamless integration of machining operations with other systems and parts.

System 3R compatible MaxxMacro 2923 WEDM SuperVise for clamping rectangular workpieces up to 100 mm. Mounts on HP, Magnum or MacroTwin leveling adapter.

Tightening torque 7 Nm.

Product Details:

System 3R compatible MaxxMacro 2923D WEDM Double SuperVise comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

System 3R compatible MaxxMacro 2923D WEDM Double SuperVise is 100% cross compatible with System 3R. This makes it easy to perform compound machining operations quickly and accurately. Plus, it enables seamless integration of machining operations with other systems and parts.

System 3R compatible MaxxMacro 2923D WEDM Double SuperVise for collision-free clamping of both rectangular and round workpieces (14-45 mm and Ø 3-15 mm respectively).

Total clamping range, 60 mm (to be split between two workpieces).

Alternatively, dismount the double jaw and use as a regular MX-2923 (3R-292.3) vice for rectangular workpieces (0-100 mm).

Tightening torque 7 Nm.

Product Details:

System 3R compatible MaxxMacro 2923P WEDM Prism SuperVise comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

System 3R compatible MaxxMacro 2923P WEDM Prism SuperVise is 100% cross compatible with System 3R. This makes it easy to perform compound machining operations quickly and accurately. Plus, it enables seamless integration of machining operations with other systems and parts.

System 3R compatible MaxxMacro 2923P WEDM Prism SuperVise for vertical or horizontal collision-free clamping of round workpieces (Ø 3-15 mm).

Alternatively, rotate the movable jaw and use as a regular MX-2923 (3R-292.3) vice for rectangular workpieces (0-100 mm).

Tightening torque 7 Nm.

Product Details:

System 3R compatible MaxxMacro 2923S WEDM Universal Holder comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

System 3R compatible MaxxMacro 2923S WEDM Universal Holder is 100% cross compatible with System 3R. This makes it easy to perform compound machining operations quickly and accurately. Plus, it enables seamless integration of machining operations with other systems and parts.

System 3R compatible MaxxMacro 2923S WEDM Universal Holder for round workpieces up to 90 mm, or rectangular workpieces 100x90 mm.

Tightening torque 4 Nm

Recommended maximum workpiece weight 7 kg

Product Details:

System 3R compatible MaxxMagnum (System 3R) 2926HP WEDM SuperVise comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

System 3R compatible MaxxMacro 2926HP WEDM Magnum SuperVise is 100% cross compatible with System 3R. WEDM Vise for clamping rectangular workpieces up to 155 mm. Engineered for precision and accuracy, the System 3R compatible MaxxMacro 2926HP WEDM Magnum SuperVise provides the perfect combination of strength and stability for your machining needs.

Unparalleled Performance: The System 3R compatible MaxxMacro 2926HP Supervice Magnum is engineered to deliver exceptional performance and efficiency. With its state-of-the-art features, it sets a new industry standard for precision machining tools. Whether you're working on intricate molds, complex components, or high-volume production, this tool is designed to exceed your expectations.

Product Details:

System 3R compatible MaxxMacro 29292 WEDM SuperVise comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

System 3R compatible MaxxMacro 29292 WEDM SuperVise is 100% cross compatible with System 3R. This makes it easy to perform compound machining operations quickly and accurately. Plus, it enables seamless integration of machining operations with other systems and parts.

System 3R compatible MaxxMacro 29292 WEDM SuperVise intended specially for clamping tool blanks with 30-degree dovetail connection. Removable middle jaw allows clamping of either one large or two smalls blanks.

Recommended maximum weight 7 kg.

Tightening torque 7 Nm.

Product Details:

System 3R compatible MaxxMacro 2933 WEDM SuperVise comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

System 3R compatible MaxxMacro 2933 WEDM SuperVise is 100% cross compatible with System 3R. This makes it easy to perform compound machining operations quickly and accurately. Plus, it enables seamless integration of machining operations with other systems and parts.

System 3R compatible MaxxMacro 2933 WEDM SuperVise for clamping round workpieces 8-90 mm. Mounts on HP, Magnum or MacroTwin levelling adapter.

Recommended maximum workpiece weight 7 kg.

Tightening torque 8 Nm.

Product Details:

System 3R compatible MaxxMacro MXRuler 23926 WEDM Stepped 60mm Support Tab comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

System 3R compatible MaxxMacro MX-23926 MXRuler WEDM Zero-line support tab for positioning workpieces 5 mm above machine zero line. This tab enables precise, accurate, and reliable positioning of workpieces, drastically reducing the time required for quality assurance in production processes.

The System 3R compatible MaxxMacro MX-23926 MXRuler WEDM Zero-line support tab is fully compatible with System 3R ruler system.

Recommended maximum workpiece weight per tap 50 kg.

Supplied in sets of 2.

Product Details:

System 3R compatible MaxxMacro 2936HP WEDM System 3R compatible MaxxMagnum SuperVise comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

System 3R compatible MaxxMacro 2936HP WEDM Magnum SuperVise is 100% cross compatible with System 3R. This makes it easy to perform compound machining operations quickly and accurately. Plus, it enables seamless integration of machining operations with other systems and parts.

System 3R compatible MaxxMacro 2936HP WEDM Magnum SuperVise for clamping round workpieces 15-155 mm. Mounts on HP, Magnum or MacroTwin levelling adapter. Recommended maximum workpiece weight 12 kg

Product Details:

System 3R compatible MaxxMacro MXRuler 2391 WEDM Ruler Vice comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

System 3R compatible MaxxMacro 2391 MXRuler WEDM Ruler Vice features movable jaws for an extensive range of rectangular items and detachable Z-support tabs to ensure simple setting-up. To be mounted on ruler MX-239XXX.

System 3R compatible MaxxMacro 2391 MXRuler WEDM Ruler Vice is fully compatible with System 3R ruler system.

• Recommended maximum workpiece weight with one vice: 15 kg
• Recommended maximum workpiece weight with two vices: 200 kg
• Tightening torque 8 Nm
• Supplied with two System 3R compatible MaxxMacro 23926 MXRuler WEDM Zero-line support tab
  

Product Details:

System 3R compatible MaxxMacro 2942 WEDM Vise comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

System 3R compatible MaxxMacro 2942 WEDM Vice can be integrated with the MXRuler system, via the MX-239XXX ruler, or mounted onto a 54x54 System 3R compatible MaxxMacro pallet.

System 3R compatible MaxxMacro 2942 WEDM Vice is fully compatible with System 3R system and can be mounted on 3R-237.2, 3R-292.66HP, 3R-294, a ruler in the 3Ruler system or System 3R Macro pallet 54x54.

• Clamping range 0-50 mm
• Recommended maximum workpiece weight 5 kg
• Tightening torque 3 Nm
• Weight 1.2 kg

Product Details:

System 3R compatible MaxxMacro 242HP WEDM User Kit for clamping rectangular, round or thin workpieces.

System 3R compatible MaxxMacro 242HP WEDM User Kit is fully compatible with System 3R system. Cross Compatible: 3R-242HP. The System 3R compatible MaxxMacro 242HP WEDM User Kit provides greater flexibility and efficiency, making it easy to switch between different systems in your workflow.

System 3R compatible MaxxMacro 242HP WEDM User Kit includes:

• System 3R compatible MaxxMacro 272HP Leveling adapter WEDM Dovetail (MM-WEHDR002 / MX-272HP)
• System 3R compatible MaxxMacro 225 MXRuler WEDM Reference stop (MM-RUACR207 / MX-225)
• System 3R compatible MaxxMacro 2943 WEDM Vise (MM-WEVIR012 / MX-2943)
• System 3R compatible MaxxMacro 2923 WEDM SuperVise <100mm (MM-WEVIR003 / MX-2923)
• System 3R compatible MaxxMacro 2933 WEDM SuperVise ⌀8-90mm (MM-WEVIR009 / MX-2933)
  
• Torque wrench
• Allen key, 3 mm
• Allen key, 4 mm

*Products shown mounted on: System 3R compatible MaxxMacro MX-272HP Leveling adapter WEDM Dovetail and System 3R compatible MaxxMacro Reference element WEDM 209 mm (reference element not included)

System 3R compatible MaxxMacro 2943 WEDM Vise comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

xxMacro 2943 WEDM Vice features vertical clamping workpieces up to 100 mm and can be mounted on HP, Magnum or Leveling Adapter.

System 3R compatible MaxxMacro 2943 WEDM Vice is fully compatible with System 3R system.

• For vertical clamping workpieces up to 100 mm
• Tightening torque 7 Nm
  

Product Details:

The System 3R compatible MaxxMacro WEDM Kit is a comprehensive package that includes several essential components for effective wire EDM machining. The kit includes a leveling adapter, a dovetail rail system, and a SuperVise, all designed to work together seamlessly to improve the accuracy and precision of your wire EDM operations.

The leveling adapter included in the kit is designed to ensure that your workpiece is properly leveled and secured during machining. This helps to prevent errors and inaccuracies caused by a tilted or unsteady workpiece.

The dovetail rail system included in the kit provides a stable and secure platform for your wire EDM machine, helping to reduce errors and other sources of interference that can affect machining accuracy. This is especially important for high-precision work.

The SuperVise included in the kit is a supercharged version of a traditional vise, providing exceptional clamping force and holding power. Its unique design allows for rapid and accurate positioning of the workpiece, and its powerful grip helps to ensure that the workpiece remains securely in place throughout the machining process.

To learn more about each component included in the System 3R compatible MaxxMacro WEDM Kit and how they can benefit your wire EDM machining operations, please visit the following links:

Kit Includes the following System 3R compatible MaxxMacro items
Leveling Adapter: System 3R compatible MaxxMacro 272HP Leveling adapter WEDM Dovetail (MM-WEHDR002 / MX-272HP)

Rail System: System 3R compatible MaxxMacro 2002J1 MXRuler WEDM Reference element 209mm (MM-RURES209 / MX-2002J1)

SuperVise: System 3R compatible MaxxMagnum 2926HP WEDM SuperVise (MM-WEVIR007 / MX-2926HP)

System 3R compatible MaxxMacro 6222 WEDM Manual Chuck comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

System 3R compatible MaxxMacro 6222 WEDM Manual Chuck adapter for System 3R compatible MaxxMacro holders in the WEDM system. Fully compatible with System 3R system and 3Ruler ruler system.

• Fixed index positions 4x90º
• Clamping force 6000 N
• Weight 1.9 kg

Product Details:

System 3R compatible MaxxMacro 262HP Leveling adapter WEDM Chucking comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

System 3R compatible MaxxMacro MX-262HP, Leveling adapter, WEDM is 100% cross compatible with System 3R rail Systems. This Adapter is designed to function with WEDM chucks and not Dovetails.

Product Details:

System 3R compatible MaxxMacro MXRuler 2015A WEDM Angle shelf comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

System 3R compatible MaxxMacro 2015A WEDM Angle shelf mounts directly on the machine table. For vertical mounting of a Macro chuck in the machine. Its design ensures maximum stability for precise and reliable accuracy. Enjoying the ease of installation without the need for further attachments.

System 3R compatible MaxxMacro 2015A WEDM Angle shelf is fully compatible with System 3R macro system.

*Chuck not included

Product Details:

System 3R compatible MaxxMacro MXRuler A2391 WEDM 60mm Clamps comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

System 3R compatible MaxxMacro A2391 MXRuler WEDM Clamps facilitate the secure attachment of MX-Rulers to reference elements.

• Supplied in sets of 2.
• Max clamping force: 6nm

Product Details:

System 3R compatible MaxxMacro MXRuler A2392 WEDM 86mm Clamps comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

System 3R compatible MaxxMacro A2392 MXRuler WEDM Clamps facilitate the secure attachment of 86mm MX-Rulers to reference elements.

• Supplied in sets of 2.
• Max clamping force: 6nm

Product Details:

System 3R compatible MaxxMacro MX-23925 MXRuler WEDM Zero-line support tab for positioning workpieces on machine zero line +5mm. This tab enables precise, accurate, and reliable positioning of workpieces, drastically reducing the time required for quality assurance in production processes.

• The System 3R compatible MaxxMacro MX-23925 MXRuler WEDM Zero-line support tab is fully compatible with System 3R ruler system.
• Recommended maximum workpiece weight per tap 50 kg.
• Supplied in sets of 2.

System 3R compatible MaxxMacro MXRuler 239251 WEDM Standard Support Tab comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

System 3R compatible MaxxMacro MX-239251 MXRuler WEDM Zero-line support tab for positioning workpieces on machine zero line +5mm. This tab enables precise, accurate, and reliable positioning of workpieces, drastically reducing the time required for quality assurance in production processes.

• The System 3R compatible MaxxMacro MX-239251 MXRuler WEDM Zero-line support tab is fully compatible with System 3R ruler system.
• Recommended maximum workpiece weight per tap 50 kg.
• Supplied in sets of 2.

Product Details:

System 3R compatible MaxxMacro A239 MXRuler WEDM Clamps are a stationary aluminum end clamps to facilitate the secure attachment of MX-Rulers to the CNC table.

System 3R compatible MaxxMacro A239 MXRuler WEDM Clamps for mounting a ruler directly on the machine table without reference elements.

System 3R compatible MaxxMacro A239 MXRuler WEDM Clamps is 100% cross compatible with System 3R ruler system.

Supplied in sets of 2.

System 3R compatible MaxxMacro MXRuler 239241 WEDM Basic Toe Clamps comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

The System 3R compatible MaxxMacro MX-239241 MXRuler Basic WEDM Clamps work to secure workpieces onto the MXRuler with System 3R compatible MaxxMacro's Zero-line support tab.

System 3R compatible MaxxMacro MX-239241 MXRuler Basic WEDM Clamps is 100% cross compatible with System 3R ruler These clamps are precision engineered and tested for accurate tool positioning, enabling repeatable and reliable machining results.

Supplied in sets of 2, M6 thread.

Product Details:

System 3R compatible MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for machines with a frame table. With the aid of MXRuler, rectangular or round workpieces, lightweight or heavy, large or small, are located on the machine zero line, without risk of collision. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• MXRuler's are available in various lengths to match different machines.
• High quality materials: Full rust proof design.
• Built-in height adjustment
• 86mm version: This is a more rigid design with upgraded width from 60mm to 86mm wide and a thicker height from 30mm to 36mm height
• Compatible with any reference element, choose the correct one according to your machine. If you opt for a reference element, also pick up the Sliding Clamps: System 3R compatible MaxxMacro A2392 MXRuler WEDM 86mm Clamps
• The MXRuler is compatible with multiple accessories, and the dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler 86mm
• x1 Eccentric Stop
• x1 Clamps Non-Rail (MX-A239)
• x3 Zero-line Support tab (MX-23922)
• x2 5mm Support tab (MX-23925)
• x3 Basic Clamps (MX-239241)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Excetek V850G
  
• Fanuc alpha C800iB
  
• Mitsubishi MV4800R
  
• Mitsubishi MV4800S
  
• Seibu MM80B
  

Product Details:

System 3R compatible MaxxMacro MXRuler 2393 WEDM Vee holder comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

System 3R compatible MaxxMacro 2393 MXRuler WEDM Vee holder for clamping round workpieces. To be mounted on ruler MX-239XXX.
System 3R compatible MaxxMacro 2393 MXRuler WEDM Vee holder is fully compatible with System 3R rulers and holders 3R-237.2, 3R-292.66HP or 3R-239-XXX.

• Clamping range Ø25-300 mm, for workpieces larger than Ø130mm the product has to be used with a second MXRuler instead of the beam supplied.
• Height with toe clamps: 13.5-30 mm
• 3 sets of screw (M6x60; M6x80 and M6x128)

Product Details:

System 3R compatible MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for machines with a frame table. With the aid of MXRuler, rectangular or round workpieces, lightweight or heavy, large or small, are located on the machine zero line, without risk of collision. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• MXRuler's are available in various lengths to match different machines.
• High quality materials: Full rust proof design.
• Built-in height adjustment
• 86mm version: This is a more rigid design with upgraded width from 60mm to 86mm wide and a thicker height from 30mm to 36mm height
• Compatible with any reference element, choose the correct one according to your machine. If you opt for a reference element, also pick up the Sliding Clamps: System 3R compatible MaxxMacro A2392 MXRuler WEDM 86mm Clamps
• The MXRuler is compatible with multiple accessories, and the dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler 86mm
• x1 Eccentric Stop
• x1 Clamps Non-Rail (MX-A239)
• x3 Zero-line Support tab (MX-23922)
• x2 5mm Support tab (MX-23925)
• x3 Basic Clamps (MX-239241)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

Vertical setup:

Product Details:

System 3R compatible MaxxMacro 225 MXRuler WEDM Reference stop can be moved infinitely along the entire reference element. System 3R compatible MaxxMacro 225 MXRuler WEDM Reference stop is fully compatible with System 3R Ruler system. It provides for improved accuracy and flexibility, so you can get the job done right.

System 3R compatible MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for machines with a frame table. With the aid of MXRuler, rectangular or round workpieces, lightweight or heavy, large or small, are located on the machine zero line, without risk of collision. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• MXRuler's are available in various lengths to match different machines.
• High quality materials: Full rust proof design.
• Built-in height adjustment
• 86mm version: This is a more rigid design with upgraded width from 60mm to 86mm wide and a thicker height from 30mm to 36mm height
• Compatible with any reference element, choose the correct one according to your machine. If you opt for a reference element, also pick up the Sliding Clamps: System 3R compatible MaxxMacro A2392 MXRuler WEDM 86mm Clamps
• The MXRuler is compatible with multiple accessories, and the dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler 86mm
• x1 Eccentric Stop
• x1 Clamps Non-Rail (MX-A239)
• x3 Zero-line Support tab (MX-23922)
• x2 5mm Support tab (MX-23925)
• x3 Basic Clamps (MX-239241)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• AgieCharmilles CUT 400 (yr 2012)
  
• AgieCharmilles CUT 400 Sp
  
• AgieCharmilles CUT P 800
  
• AgieCharmilles CUT P 800 L Flushing
• Charmilles RoboFil 640
  
• Makino U86 (L-shape)
  
• ONA AE600
  

Vertical setup:

• Sodick AQ1200L
  

Product Details:

System 3R compatible MaxxMacro MXRuler 2392 WEDM Low Profile Holder comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

System 3R compatible MaxxMacro MXRuler 2392 WEDM Low Profile Holder for clamping thin workpieces. To be mounted on MXRuler.

System 3R compatible MaxxMacro MXRuler 2392 WEDM Low Profile Holder is fully compatible with System 3R ruler system.

• Clamping range 0-27 mm
• Supplied in sets of 4
• Weight per set 0.6 kg

Product Details:

System 3R compatible MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for machines with a frame table. With the aid of MXRuler, rectangular or round workpieces, lightweight or heavy, large or small, are located on the machine zero line, without risk of collision. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• MXRuler's are available in various lengths to match different machines.
• High quality materials: Full rust proof design.
• Built-in height adjustment
• 86mm version: This is a more rigid design with upgraded width from 60mm to 86mm wide and a thicker height from 30mm to 36mm height
• Compatible with any reference element, choose the correct one according to your machine. If you opt for a reference element, also pick up the Sliding Clamps: System 3R compatible MaxxMacro A2392 MXRuler WEDM 86mm Clamps
• The MXRuler is compatible with multiple accessories, and the dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler 86mm
• x1 Eccentric Stop
• x1 Clamps Non-Rail (MX-A239)
• x3 Zero-line Support tab (MX-23922)
• x2 5mm Support tab (MX-23925)
• x3 Basic Clamps (MX-239241)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• AgieCharmilles Progress VP4
• Agie Progress 4
  
• ONA AF60
  
• ONA AV60
  
• ONA AX6
  

Product Details:

System 3R compatible MaxxMacro MXRuler 23922 WEDM Stepped Support Tab comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

System 3R compatible MaxxMacro MX-23922 MXRuler WEDM Zero-line support tab for positioning workpieces 5 mm above machine zero line. This tab enables precise, accurate, and reliable positioning of workpieces, drastically reducing the time required for quality assurance in production processes.

The System 3R compatible MaxxMacro MX-23922 MXRuler WEDM Zero-line support tab is fully compatible with System 3R ruler system.

Recommended maximum workpiece weight per tap 50 kg.

Supplied in sets of 2.

Product Details:

System 3R compatible MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for machines with a frame table. With the aid of MXRuler, rectangular or round workpieces, lightweight or heavy, large or small, are located on the machine zero line, without risk of collision. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• MXRuler's are available in various lengths to match different machines.
• High quality materials: Full rust proof design.
• Built-in height adjustment
• 86mm version: This is a more rigid design with upgraded width from 60mm to 86mm wide and a thicker height from 30mm to 36mm height
• Compatible with any reference element, choose the correct one according to your machine. If you opt for a reference element, also pick up the Sliding Clamps: System 3R compatible MaxxMacro A2392 MXRuler WEDM 86mm Clamps
• The MXRuler is compatible with multiple accessories, and the dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler 86mm
• x1 Eccentric Stop
• x1 Clamps Non-Rail (MX-A239)
• x3 Zero-line Support tab (MX-23922)
• x2 5mm Support tab (MX-23925)
• x3 Basic Clamps (MX-239241)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Charmilles RoboFil 690
  
• Charmilles RoboFil 690cc
  

Vertical setup:

• AgieCharmilles CUT P 1250
  

Product Details:

System 3R compatible MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for machines with a frame table. With the aid of MXRuler, rectangular or round workpieces, lightweight or heavy, large or small, are located on the machine zero line, without risk of collision. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• MXRuler's are available in various lengths to match different machines.
• High quality materials: Full rust proof design.
• Built-in height adjustment
• 86mm version: This is a more rigid design with upgraded width from 60mm to 86mm wide and a thicker height from 30mm to 36mm height
• Compatible with any reference element, choose the correct one according to your machine. If you opt for a reference element, also pick up the Sliding Clamps: System 3R compatible MaxxMacro A2392 MXRuler WEDM 86mm Clamps
• The MXRuler is compatible with multiple accessories, and the dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler 86mm
• x1 Eccentric Stop
• x1 Clamps Non-Rail (MX-A239)
• x3 Zero-line Support tab (MX-23922)
• x2 5mm Support tab (MX-23925)
• x3 Basic Clamps (MX-239241)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Sodick AQ900L
  

Product Details:

System 3R compatible MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for machines with a frame table. With the aid of MXRuler, rectangular or round workpieces, lightweight or heavy, large or small, are located on the machine zero line, without risk of collision. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• MXRuler's are available in various lengths to match different machines.
• High quality materials: Full rust proof design.
• Built-in height adjustment
• 86mm version: This is a more rigid design with upgraded width from 60mm to 86mm wide and a thicker height from 30mm to 36mm height
• Compatible with any reference element, choose the correct one according to your machine. If you opt for a reference element, also pick up the Sliding Clamps: System 3R compatible MaxxMacro A2392 MXRuler WEDM 86mm Clamps
• The MXRuler is compatible with multiple accessories, and the dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler 86mm
• x1 Eccentric Stop
• x1 Clamps Non-Rail (MX-A239)
• x3 Zero-line Support tab (MX-23922)
• x2 5mm Support tab (MX-23925)
• x3 Basic Clamps (MX-239241)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

Product Details:

System 3R compatible MaxxMacro 23920 MXRuler WEDM Ruler Kit for clamping rectangular, round or thin workpieces.

System 3R compatible MaxxMacro 23920 MXRuler WEDM Ruler Kit is fully compatible with System 3R ruler system. Cross Compatible: 3R-239.20. The System 3R compatible MaxxMacro 23920 MXRuler WEDM Ruler Kit provides greater flexibility and efficiency, making it easy to switch between different systems in your workflow.

System 3R compatible MaxxMacro 23920 MXRuler WEDM Ruler Kit includes:

• MX-2391 Ruler Vice (MM-RUACR209 / MX-2391)
• System 3R compatible MaxxMacro MXRuler 2392 WEDM Low Profile Holder (MM-RUACR208 / MX-2392)
  
• System 3R compatible MaxxMacro MXRuler 2393 WEDM Vee holder (MM-RUACR206 / MX-2393)
  
• Torque wrench, 8 Nm
• Allen key, 3 mm
• Allen key, 4 mm

System 3R compatible MaxxMacro MXRuler 2015 WEDM Angle shelf comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

System 3R compatible MaxxMacro 2015 MXRuler WEDM Angle shelf mounts directly on the machine table. For vertical mounting of a Macro chuck or short reference element in the machine. Its design ensures maximum stability for precise and reliable accuracy. Enjoying the ease of installation without the need for further attachments.

System 3R compatible MaxxMacro 2015 MXRuler WEDM Angle shelf is fully compatible with System 3R macro system.

Product Details:

System 3R compatible MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for machines with a frame table. With the aid of MXRuler, rectangular or round workpieces, lightweight or heavy, large or small, are located on the machine zero line, without risk of collision. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• MXRuler's are available in various lengths to match different machines.
• High quality materials: Full rust proof design.
• Built-in height adjustment
• 86mm version: This is a more rigid design with upgraded width from 60mm to 86mm wide and a thicker height from 30mm to 36mm height
• Compatible with any reference element, choose the correct one according to your machine. If you opt for a reference element, also pick up the Sliding Clamps: System 3R compatible MaxxMacro A2392 MXRuler WEDM 86mm Clamps
• The MXRuler is compatible with multiple accessories, and the dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler 86mm
• x1 Eccentric Stop
• x1 Clamps Non-Rail (MX-A239)
• x3 Zero-line Support tab (MX-23922)
• x2 5mm Support tab (MX-23925)
• x3 Basic Clamps (MX-239241)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Makino SP64
  

Product Details:

System 3R compatible MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for machines with a frame table. With the aid of MXRuler, rectangular or round workpieces, lightweight or heavy, large or small, are located on the machine zero line, without risk of collision. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• MXRuler's are available in various lengths to match different machines.
• High quality materials: Full rust proof design.
• Built-in height adjustment
• 86mm version: This is a more rigid design with upgraded width from 60mm to 86mm wide and a thicker height from 30mm to 36mm height
• Compatible with any reference element, choose the correct one according to your machine. If you opt for a reference element, also pick up the Sliding Clamps: System 3R compatible MaxxMacro A2392 MXRuler WEDM 86mm Clamps
• The MXRuler is compatible with multiple accessories, and the dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler 86mm
• x1 Eccentric Stop
• x1 Clamps Non-Rail (MX-A239)
• x3 Zero-line Support tab (MX-23922)
• x2 5mm Support tab (MX-23925)
• x3 Basic Clamps (MX-239241)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Vertical setup:

• Charmilles RoboFil 640
  
• Charmilles RoboFil 690
  
• Charmilles RoboFil 690cc
  

Product Details:

System 3R compatible MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for machines with a frame table. With the aid of MXRuler, rectangular or round workpieces, lightweight or heavy, large or small, are located on the machine zero line, without risk of collision. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• MXRuler's are available in various lengths to match different machines.
• High quality materials: Full rust proof design.
• Built-in height adjustment
• 86mm version: This is a more rigid design with upgraded width from 60mm to 86mm wide and a thicker height from 30mm to 36mm height
• Compatible with any reference element, choose the correct one according to your machine. If you opt for a reference element, also pick up the Sliding Clamps: System 3R compatible MaxxMacro A2392 MXRuler WEDM 86mm Clamps
• The MXRuler is compatible with multiple accessories, and the dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler 86mm
• x1 Eccentric Stop
• x1 Clamps Non-Rail (MX-A239)
• x3 Zero-line Support tab (MX-23922)
• x2 5mm Support tab (MX-23925)
• x3 Basic Clamps (MX-239241)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Makino EU64
  

Product Details:

System 3R compatible MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for machines with a frame table. With the aid of MXRuler, rectangular or round workpieces, lightweight or heavy, large or small, are located on the machine zero line, without risk of collision. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• MXRuler's are available in various lengths to match different machines.
• High quality materials: Full rust proof design.
• Built-in height adjustment
• 86mm version: This is a more rigid design with upgraded width from 60mm to 86mm wide and a thicker height from 30mm to 36mm height
• Compatible with any reference element, choose the correct one according to your machine. If you opt for a reference element, also pick up the Sliding Clamps: System 3R compatible MaxxMacro A2392 MXRuler WEDM 86mm Clamps
• The MXRuler is compatible with multiple accessories, and the dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler 86mm
• x1 Eccentric Stop
• x1 Clamps Non-Rail (MX-A239)
• x3 Zero-line Support tab (MX-23922)
• x2 5mm Support tab (MX-23925)
• x3 Basic Clamps (MX-239241)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

Vertical setup:

Product Details:

System 3R compatible MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for machines with a frame table. With the aid of MXRuler, rectangular or round workpieces, lightweight or heavy, large or small, are located on the machine zero line, without risk of collision. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• MXRuler's are available in various lengths to match different machines.
• High quality materials: Full rust proof design.
• Built-in height adjustment
• 86mm version: This is a more rigid design with upgraded width from 60mm to 86mm wide and a thicker height from 30mm to 36mm height
• Compatible with any reference element, choose the correct one according to your machine. If you opt for a reference element, also pick up the Sliding Clamps: System 3R compatible MaxxMacro A2392 MXRuler WEDM 86mm Clamps
• The MXRuler is compatible with multiple accessories, and the dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler 86mm
• x1 Eccentric Stop
• x1 Clamps Non-Rail (MX-A239)
• x3 Zero-line Support tab (MX-23922)
• x2 5mm Support tab (MX-23925)
• x3 Basic Clamps (MX-239241)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Mitsubishi FA30-S Advance
  
• Sodick AQ750L
  
• Seibu 1175B
  
• Seibu MM75B
  
• Seibu M75B
  

Product Details:

System 3R compatible MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for machines with a frame table. With the aid of MXRuler, rectangular or round workpieces, lightweight or heavy, large or small, are located on the machine zero line, without risk of collision. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• MXRuler's are available in various lengths to match different machines.
• High quality materials: Full rust proof design.
• Built-in height adjustment
• 86mm version: This is a more rigid design with upgraded width from 60mm to 86mm wide and a thicker height from 30mm to 36mm height
• Compatible with any reference element, choose the correct one according to your machine. If you opt for a reference element, also pick up the Sliding Clamps: System 3R compatible MaxxMacro A2392 MXRuler WEDM 86mm Clamps
• The MXRuler is compatible with multiple accessories, and the dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler 86mm
• x1 Eccentric Stop
• x1 Clamps Non-Rail (MX-A239)
• x3 Zero-line Support tab (MX-23922)
• x2 5mm Support tab (MX-23925)
• x3 Basic Clamps (MX-239241)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Fanuc alpha 1iA
  
• Fanuc Alpha 1C
  
• Sodick A500
  
• Sodick A530
• Sodick VZ500L
  
• Makino U53
  
• Makino U53i
  

Product Details:

System 3R compatible MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for machines with a frame table. With the aid of MXRuler, rectangular or round workpieces, lightweight or heavy, large or small, are located on the machine zero line, without risk of collision. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• MXRuler's are available in various lengths to match different machines.
• High quality materials: Full rust proof design.
• Built-in height adjustment
• 86mm version: This is a more rigid design with upgraded width from 60mm to 86mm wide and a thicker height from 30mm to 36mm height
• Compatible with any reference element, choose the correct one according to your machine. If you opt for a reference element, also pick up the Sliding Clamps: System 3R compatible MaxxMacro A2392 MXRuler WEDM 86mm Clamps
• The MXRuler is compatible with multiple accessories, and the dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler 86mm
• x1 Eccentric Stop
• x1 Clamps Non-Rail (MX-A239)
• x3 Zero-line Support tab (MX-23922)
• x2 5mm Support tab (MX-23925)
• x3 Basic Clamps (MX-239241)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Chmer 743
  

Product Details:

System 3R compatible MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for machines with a frame table. With the aid of MXRuler, rectangular or round workpieces, lightweight or heavy, large or small, are located on the machine zero line, without risk of collision. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• MXRuler's are available in various lengths to match different machines.
• High quality materials: Full rust proof design.
• Built-in height adjustment
• 86mm version: This is a more rigid design with upgraded width from 60mm to 86mm wide and a thicker height from 30mm to 36mm height
• Compatible with any reference element, choose the correct one according to your machine. If you opt for a reference element, also pick up the Sliding Clamps: System 3R compatible MaxxMacro A2392 MXRuler WEDM 86mm Clamps
• The MXRuler is compatible with multiple accessories, and the dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler 86mm
• x1 Eccentric Stop
• x1 Clamps Non-Rail (MX-A239)
• x3 Zero-line Support tab (MX-23922)
• x2 5mm Support tab (MX-23925)
• x3 Basic Clamps (MX-239241)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• AgieCharmilles CUT 3000 / S / X (yr 2011-)
• AgieCharmilles CUT X 500
  
• Agie Challenge 3
  
• Agie Classic 3
  
• Agie Evolution 3
  
• Agie Excellence 3
  
• Agie Progress 3
  
• AgieCharmilles Progress VP3 (yr2014-2021)
  
• Agiecut Size 3
  

Product Details:

System 3R compatible MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for machines with a frame table. With the aid of MXRuler, rectangular or round workpieces, lightweight or heavy, large or small, are located on the machine zero line, without risk of collision. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• MXRuler's are available in various lengths to match different machines.
• High quality materials: Full rust proof design.
• Built-in height adjustment
• 86mm version: This is a more rigid design with upgraded width from 60mm to 86mm wide and a thicker height from 30mm to 36mm height
• Compatible with any reference element, choose the correct one according to your machine. If you opt for a reference element, also pick up the Sliding Clamps: System 3R compatible MaxxMacro A2392 MXRuler WEDM 86mm Clamps
• The MXRuler is compatible with multiple accessories, and the dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler 86mm
• x1 Eccentric Stop
• x1 Clamps Non-Rail (MX-A239)
• x3 Zero-line Support tab (MX-23922)
• x2 5mm Support tab (MX-23925)
• x3 Basic Clamps (MX-239241)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Sodick A750
  

Product Details:

System 3R compatible MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for machines with a frame table. With the aid of MXRuler, rectangular or round workpieces, lightweight or heavy, large or small, are located on the machine zero line, without risk of collision. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• MXRuler's are available in various lengths to match different machines.
• High quality materials: Full rust proof design.
• Built-in height adjustment
• 86mm version: This is a more rigid design with upgraded width from 60mm to 86mm wide and a thicker height from 30mm to 36mm height
• Compatible with any reference element, choose the correct one according to your machine. If you opt for a reference element, also pick up the Sliding Clamps: System 3R compatible MaxxMacro A2392 MXRuler WEDM 86mm Clamps
• The MXRuler is compatible with multiple accessories, and the dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler 86mm
• x1 Eccentric Stop
• x1 Clamps Non-Rail (MX-A239)
• x3 Zero-line Support tab (MX-23922)
• x2 5mm Support tab (MX-23925)
• x3 Basic Clamps (MX-239241)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Fanuc alpha 1iB
  
• Fanuc alpha 1iC
  
• Makino U53j
  
• Makino U53Tj
  
• Makino UP53j
  
• Makino UPV-5
  
• Makino W53FB
  
• Makino WB53B
  
• Sodick AQ535L (yr. 2001-)
  
• Sodick AQ535
• Sodick AQ550
  

Product Details:

System 3R compatible MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for machines with a frame table. With the aid of MXRuler, rectangular or round workpieces, lightweight or heavy, large or small, are located on the machine zero line, without risk of collision. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• MXRuler's are available in various lengths to match different machines.
• High quality materials: Full rust proof design.
• Built-in height adjustment
• 86mm version: This is a more rigid design with upgraded width from 60mm to 86mm wide and a thicker height from 30mm to 36mm height
• Compatible with any reference element, choose the correct one according to your machine. If you opt for a reference element, also pick up the Sliding Clamps: System 3R compatible MaxxMacro A2392 MXRuler WEDM 86mm Clamps
• The MXRuler is compatible with multiple accessories, and the dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler 86mm
• x1 Eccentric Stop
• x1 Clamps Non-Rail (MX-A239)
• x3 Zero-line Support tab (MX-23922)
• x2 5mm Support tab (MX-23925)
• x3 Basic Clamps (MX-239241)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Charmilles RoboFil 500
  Charmilles RoboFil 504
  Charmilles RoboFil 510
  

Product Details:

System 3R compatible MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for machines with a frame table. With the aid of MXRuler, rectangular or round workpieces, lightweight or heavy, large or small, are located on the machine zero line, without risk of collision. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• MXRuler's are available in various lengths to match different machines.
• High quality materials: Full rust proof design.
• Built-in height adjustment
• 86mm version: This is a more rigid design with upgraded width from 60mm to 86mm wide and a thicker height from 30mm to 36mm height
• Compatible with any reference element, choose the correct one according to your machine. If you opt for a reference element, also pick up the Sliding Clamps: System 3R compatible MaxxMacro A2392 MXRuler WEDM 86mm Clamps
• The MXRuler is compatible with multiple accessories, and the dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler 86mm
• x1 Eccentric Stop
• x1 Clamps Non-Rail (MX-A239)
• x3 Zero-line Support tab (MX-23922)
• x2 5mm Support tab (MX-23925)
• x3 Basic Clamps (MX-239241)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Sodick AQ560L
  
• Accutex 500I
  

Product Details:

System 3R compatible MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for machines with a frame table. With the aid of MXRuler, rectangular or round workpieces, lightweight or heavy, large or small, are located on the machine zero line, without risk of collision. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• MXRuler's are available in various lengths to match different machines.
• High quality materials: Full rust proof design.
• Built-in height adjustment
• 86mm version: This is a more rigid design with upgraded width from 60mm to 86mm wide and a thicker height from 30mm to 36mm height
• Compatible with any reference element, choose the correct one according to your machine. If you opt for a reference element, also pick up the Sliding Clamps: System 3R compatible MaxxMacro A2392 MXRuler WEDM 86mm Clamps
• The MXRuler is compatible with multiple accessories, and the dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler 86mm
• x1 Eccentric Stop
• x1 Clamps Non-Rail (MX-A239)
• x3 Zero-line Support tab (MX-23922)
• x2 5mm Support tab (MX-23925)
• x3 Basic Clamps (MX-239241)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• AgieCharmilles CUT 300 (yr 2012-)
  
• AgieCharmilles CUT 300 mS / Sp
  
• AgieCharmilles CUT P 550
  
• Charmilles RoboFil 430
  
• Charmilles RoboFil 440
  
• Sodick AQ537L
  
• Sodick A535
  
• Sodick AQ535
  

Vertical setup:

• AgieCharmilles CUT 400 (yr 2012-)
  
• AgieCharmilles CUT 400 Sp
  
• AgieCharmilles CUT P 800
  
• AgieCharmilles CUT P 800 L Flushing
  

Product Details:

System 3R compatible MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for machines with a frame table. With the aid of MXRuler, rectangular or round workpieces, lightweight or heavy, large or small, are located on the machine zero line, without risk of collision. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• MXRuler's are available in various lengths to match different machines.
• High quality materials: Full rust proof design.
• Built-in height adjustment
• 86mm version: This is a more rigid design with upgraded width from 60mm to 86mm wide and a thicker height from 30mm to 36mm height
• Compatible with any reference element, choose the correct one according to your machine. If you opt for a reference element, also pick up the Sliding Clamps: System 3R compatible MaxxMacro A2392 MXRuler WEDM 86mm Clamps
• The MXRuler is compatible with multiple accessories, and the dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler 86mm
• x1 Eccentric Stop
• x1 Clamps Non-Rail (MX-A239)
• x3 Zero-line Support tab (MX-23922)
• x2 5mm Support tab (MX-23925)
• x3 Basic Clamps (MX-239241)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• GFAC Cut 300 CT 430/440-Dovetails Left/Right
  

Product Details:

System 3R compatible MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for machines with a frame table. With the aid of MXRuler, rectangular or round workpieces, lightweight or heavy, large or small, are located on the machine zero line, without risk of collision. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• MXRuler's are available in various lengths to match different machines.
• High quality materials: Full rust proof design.
• Built-in height adjustment
• 86mm version: This is a more rigid design with upgraded width from 60mm to 86mm wide and a thicker height from 30mm to 36mm height
• Compatible with any reference element, choose the correct one according to your machine. If you opt for a reference element, also pick up the Sliding Clamps: System 3R compatible MaxxMacro A2392 MXRuler WEDM 86mm Clamps
• The MXRuler is compatible with multiple accessories, and the dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler 86mm
• x1 Eccentric Stop
• x1 Clamps Non-Rail (MX-A239)
• x3 Zero-line Support tab (MX-23922)
• x2 5mm Support tab (MX-23925)
• x3 Basic Clamps (MX-239241)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

Vertical setup:

Product Details:

System 3R compatible MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for machines with a frame table. With the aid of MXRuler, rectangular or round workpieces, lightweight or heavy, large or small, are located on the machine zero line, without risk of collision. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• MXRuler's are available in various lengths to match different machines.
• High quality materials: Full rust proof design.
• Built-in height adjustment
• 86mm version: This is a more rigid design with upgraded width from 60mm to 86mm wide and a thicker height from 30mm to 36mm height
• Compatible with any reference element, choose the correct one according to your machine. If you opt for a reference element, also pick up the Sliding Clamps: System 3R compatible MaxxMacro A2392 MXRuler WEDM 86mm Clamps
• The MXRuler is compatible with multiple accessories, and the dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler 86mm
• x1 Eccentric Stop
• x1 Clamps Non-Rail (MX-A239)
• x3 Zero-line Support tab (MX-23922)
• x2 5mm Support tab (MX-23925)
• x3 Basic Clamps (MX-239241)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Fanuc alpha C600iA
  
• Fanuc alpha C600iB
  
• Fanuc alpha C600iC
  
• Fanuc alpha 1iD
  
• Fanuc alpha 1iDP
  
• Fanuc alpha 1iE
  
• Mitsubishi MP2400
  
• Mitsubishi MV2400R / R Z+
  
• Mitsubishi MV2400S
  
• Mitsubishi MV2400S Z+
  
• Mitsubishi BA24
  
• Mitsubishi NA24
  
• Mitsubishi NA2400
  
• Mitsubishi NA2400P
  
• Mitsubishi PX05
  
• Sodick AL600G
  
• Sodick ALC600G
  
• Sodick ALN600G
  
• Sodick ALN600Q
  
• Sodick VL600Q
  
• Sodick AG600L
  
• Sodick AQ600L
• Sodick AQ600
  
• Sodick SL600G
  
• Sodick SL600P
  
• Sodick SL600Q
  
• Sodick SLC600G
  

Vertical setup:

• Fanuc alpha C800iB
  
• Mitsubishi MV4800R
  
• Mitsubishi MV4800S
  

Product Details:

System 3R compatible MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for machines with a frame table. With the aid of MXRuler, rectangular or round workpieces, lightweight or heavy, large or small, are located on the machine zero line, without risk of collision. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• MXRuler's are available in various lengths to match different machines.
• High quality materials: Full rust proof design.
• Built-in height adjustment
• 86mm version: This is a more rigid design with upgraded width from 60mm to 86mm wide and a thicker height from 30mm to 36mm height
• Compatible with any reference element, choose the correct one according to your machine. If you opt for a reference element, also pick up the Sliding Clamps: System 3R compatible MaxxMacro A2392 MXRuler WEDM 86mm Clamps
• The MXRuler is compatible with multiple accessories, and the dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler 86mm
• x1 Eccentric Stop
• x1 Clamps Non-Rail (MX-A239)
• x3 Zero-line Support tab (MX-23922)
• x2 5mm Support tab (MX-23925)
• x3 Basic Clamps (MX-239241)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

Vertical setup:

Product Details:

System 3R compatible MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for machines with a frame table. With the aid of MXRuler, rectangular or round workpieces, lightweight or heavy, large or small, are located on the machine zero line, without risk of collision. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• MXRuler's are available in various lengths to match different machines.
• High quality materials: Full rust proof design.
• Built-in height adjustment
• 86mm version: This is a more rigid design with upgraded width from 60mm to 86mm wide and a thicker height from 30mm to 36mm height
• Compatible with any reference element, choose the correct one according to your machine. If you opt for a reference element, also pick up the Sliding Clamps: System 3R compatible MaxxMacro A2392 MXRuler WEDM 86mm Clamps
• The MXRuler is compatible with multiple accessories, and the dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler 86mm
• x1 Eccentric Stop
• x1 Clamps Non-Rail (MX-A239)
• x3 Zero-line Support tab (MX-23922)
• x2 5mm Support tab (MX-23925)
• x3 Basic Clamps (MX-239241)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• ONA AV35
  
• Sodick A600W
  
• Chmer 643S
  

Vertical setup:

• ONA AE600
  

Product Details:

System 3R compatible MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for machines with a frame table. With the aid of MXRuler, rectangular or round workpieces, lightweight or heavy, large or small, are located on the machine zero line, without risk of collision. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• MXRuler's are available in various lengths to match different machines.
• High quality materials: Full rust proof design.
• Built-in height adjustment
• 86mm version: This is a more rigid design with upgraded width from 60mm to 86mm wide and a thicker height from 30mm to 36mm height
• Compatible with any reference element, choose the correct one according to your machine. If you opt for a reference element, also pick up the Sliding Clamps: System 3R compatible MaxxMacro A2392 MXRuler WEDM 86mm Clamps
• The MXRuler is compatible with multiple accessories, and the dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler 86mm
• x1 Eccentric Stop
• x1 Clamps Non-Rail (MX-A239)
• x3 Zero-line Support tab (MX-23922)
• x2 5mm Support tab (MX-23925)
• x3 Basic Clamps (MX-239241)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• AgieCharmilles CUT 30P (yr 2012-)
  
• AgieCharmilles CUT C 600
  
• AgieCharmilles CUT E 600
  
• ONA AF35
  
• ONA AE400
  
• ONA AX4
  

Product Details:

System 3R compatible MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for machines with a frame table. With the aid of MXRuler, rectangular or round workpieces, lightweight or heavy, large or small, are located on the machine zero line, without risk of collision. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• MXRuler's are available in various lengths to match different machines.
• High quality materials: Full rust proof design.
• Built-in height adjustment
• 86mm version: This is a more rigid design with upgraded width from 60mm to 86mm wide and a thicker height from 30mm to 36mm height
• Compatible with any reference element, choose the correct one according to your machine. If you opt for a reference element, also pick up the Sliding Clamps: System 3R compatible MaxxMacro A2392 MXRuler WEDM 86mm Clamps
• The MXRuler is compatible with multiple accessories, and the dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler 86mm
• x1 Eccentric Stop
• x1 Clamps Non-Rail (MX-A239)
• x3 Zero-line Support tab (MX-23922)
• x2 5mm Support tab (MX-23925)
• x3 Basic Clamps (MX-239241)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Charmilles RoboFil 6040
  
• Charmilles RoboFil 6050
  
• Excetek V650G
  
• Makino PX36
  
• Makino U6 H.E.A.T. (Square)
  
• Makino U6 (U-shape)
  
• Makino U6i (Square)
  
• Makino UP6
  
• Makino DUO64
  

Product Details:

System 3R compatible MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for machines with a frame table. With the aid of MXRuler, rectangular or round workpieces, lightweight or heavy, large or small, are located on the machine zero line, without risk of collision. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• MXRuler's are available in various lengths to match different machines.
• High quality materials: Full rust proof design.
• Built-in height adjustment
• Compatible with any reference element, choose the correct one according to your machine. If you opt for a reference element, also pick up the Sliding Clamps: System 3R compatible MaxxMacro A2391 MXRuler WEDM 60mm Clamps
• The MXRuler is compatible with multiple accessories, and the dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler
• x1 Eccentric Stop
• x1 Clamps Non-Rail (MX-A239)
• x2 Zero-line Support tab (MX-23922)
• x2 5mm Support tab (MX-23925)
• x2 Basic Clamps (MX-239241)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

Vertical setup:

Product Details:

System 3R compatible MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for machines with a frame table. With the aid of MXRuler, rectangular or round workpieces, lightweight or heavy, large or small, are located on the machine zero line, without risk of collision. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• MXRuler's are available in various lengths to match different machines.
• High quality materials: Full rust proof design.
• Built-in height adjustment
• Compatible with any reference element, choose the correct one according to your machine. If you opt for a reference element, also pick up the Sliding Clamps: System 3R compatible MaxxMacro A2391 MXRuler WEDM 60mm Clamps
• The MXRuler is compatible with multiple accessories, and the dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler
• x1 Eccentric Stop
• x1 Clamps Non-Rail (MX-A239)
• x2 Zero-line Support tab (MX-23922)
• x2 5mm Support tab (MX-23925)
• x2 Basic Clamps (MX-239241)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Fanuc Alpha 1A
  
• Charmilles RoboFil 380
• Charmilles RoboFil 390
• Charmilles RoboFil 290
• Charmilles RoboFil 300
• Charmilles RoboFil 304
• Charmilles RoboFil 310
  

Product Details:

System 3R compatible MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for machines with a frame table. With the aid of MXRuler, rectangular or round workpieces, lightweight or heavy, large or small, are located on the machine zero line, without risk of collision. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• MXRuler's are available in various lengths to match different machines.
• High quality materials: Full rust proof design.
• Built-in height adjustment
• Compatible with any reference element, choose the correct one according to your machine. If you opt for a reference element, also pick up the Sliding Clamps: System 3R compatible MaxxMacro A2391 MXRuler WEDM 60mm Clamps
• The MXRuler is compatible with multiple accessories, and the dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler
• x1 Eccentric Stop
• x1 Clamps Non-Rail (MX-A239)
• x2 Zero-line Support tab (MX-23922)
• x2 5mm Support tab (MX-23925)
• x2 Basic Clamps (MX-239241)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Fanuc alpha 0iA
• Fanuc alpha 0iB
• Fanuc alpha 0iC
• Fanuc Alpha 0C
  
• Fanuc alpha 0iP
  
• Mitsubishi BA8
• Mitsubishi MD Pro 2
• Mitsubishi PA05
  
• Sodick AD325L
  

Vertical setup:

• ONA AE300
• ONA AX3
  
• Makino SP43
  

Product Details:

System 3R compatible MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for machines with a frame table. With the aid of MXRuler, rectangular or round workpieces, lightweight or heavy, large or small, are located on the machine zero line, without risk of collision. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• MXRuler's are available in various lengths to match different machines.
• High quality materials: Full rust proof design.
• Built-in height adjustment
• Compatible with any reference element, choose the correct one according to your machine. If you opt for a reference element, also pick up the Sliding Clamps: System 3R compatible MaxxMacro A2391 MXRuler WEDM 60mm Clamps
• The MXRuler is compatible with multiple accessories, and the dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler
• x1 Eccentric Stop
• x1 Clamps Non-Rail (MX-A239)
• x2 Zero-line Support tab (MX-23922)
• x2 5mm Support tab (MX-23925)
• x2 Basic Clamps (MX-239241)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Vertical setup:

• Makino PX36
  
• Makino UP6
  

Product Details:

System 3R compatible MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for machines with a frame table. With the aid of MXRuler, rectangular or round workpieces, lightweight or heavy, large or small, are located on the machine zero line, without risk of collision. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• MXRuler's are available in various lengths to match different machines.
• High quality materials: Full rust proof design.
• Built-in height adjustment
• Compatible with any reference element, choose the correct one according to your machine. If you opt for a reference element, also pick up the Sliding Clamps: System 3R compatible MaxxMacro A2391 MXRuler WEDM 60mm Clamps
• The MXRuler is compatible with multiple accessories, and the dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler
• x1 Eccentric Stop
• x1 Clamps Non-Rail (MX-A239)
• x2 Zero-line Support tab (MX-23922)
• x2 5mm Support tab (MX-23925)
• x2 Basic Clamps (MX-239241)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Charmilles RoboFil 2050
• Charmilles 230/240 FI
  

Product Details:

System 3R compatible MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for machines with a frame table. With the aid of MXRuler, rectangular or round workpieces, lightweight or heavy, large or small, are located on the machine zero line, without risk of collision. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• MXRuler's are available in various lengths to match different machines.
• High quality materials: Full rust proof design.
• Built-in height adjustment
• 86mm version: This is a more rigid design with upgraded width from 60mm to 86mm wide and a thicker height from 30mm to 36mm height
• Compatible with any reference element, choose the correct one according to your machine. If you opt for a reference element, also pick up the Sliding Clamps: System 3R compatible MaxxMacro A2392 MXRuler WEDM 86mm Clamps
• The MXRuler is compatible with multiple accessories, and the dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler 86mm
• x1 Eccentric Stop
• x1 Clamps Non-Rail (MX-A239)
• x3 Zero-line Support tab (MX-23922)
• x2 5mm Support tab (MX-23925)
• x3 Basic Clamps (MX-239241)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Excetek V500G
  
• Mitsubishi FA20-S Advance
  
• Mitsubishi FA20
  
• Mitsubishi FA20SM (old ver.)
  
• Mitsubishi FX20 (old ver.)
  
• Mitsubishi PA20
  
• Mitsubishi QA20
  
• Mitsubishi SX2
  
• Mitsubishi SX20
  
• Mitsubishi FA30
  
• Mitsubishi FX30
  
• Mitsubishi FX30K
  
• Seibu M50B
  
• Seibu MM50B
  
• Seibu 1JMM50B

Vertical setup:

• Mitsubishi FA30-S Advance
  
• Seibu MM75B
  

Product Details:

System 3R compatible MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for machines with a frame table. With the aid of MXRuler, rectangular or round workpieces, lightweight or heavy, large or small, are located on the machine zero line, without risk of collision. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• MXRuler's are available in various lengths to match different machines.
• High quality materials: Full rust proof design.
• Built-in height adjustment
• Compatible with any reference element, choose the correct one according to your machine. If you opt for a reference element, also pick up the Sliding Clamps: System 3R compatible MaxxMacro A2391 MXRuler WEDM 60mm Clamps
• The MXRuler is compatible with multiple accessories, and the dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler
• x1 Eccentric Stop
• x1 Clamps Non-Rail (MX-A239)
• x2 Zero-line Support tab (MX-23922)
• x2 5mm Support tab (MX-23925)
• x2 Basic Clamps (MX-239241)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Mitsubishi FA10-S Advance
• Mitsubishi FA10
• Mitsubishi FA10 SM
• Mitsubishi FX10
• Mitsubishi FX10 K
• Mitsubishi SX1
• Mitsubishi SX10
  
• Sodick AQ325L
  
• Seibu M35B
• Seibu MM35B
• Accutex 300I

Vertical setup:

• Mitsubishi FA20-S Advance
• Mitsubishi FA20
• Mitsubishi FA20SM
• Mitsubishi X20
• Mitsubishi PA20
• Mitsubishi QA20
• Mitsubishi SX2
• Mitsubishi SX20
  
• Seibu MM50B
• Seibu 1JMM50B
  

Product Details:

System 3R compatible MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for machines with a frame table. With the aid of MXRuler, rectangular or round workpieces, lightweight or heavy, large or small, are located on the machine zero line, without risk of collision. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• MXRuler's are available in various lengths to match different machines.
• High quality materials: Full rust proof design.
• Built-in height adjustment
• Compatible with any reference element, choose the correct one according to your machine. If you opt for a reference element, also pick up the Sliding Clamps: System 3R compatible MaxxMacro A2391 MXRuler WEDM 60mm Clamps
• The MXRuler is compatible with multiple accessories, and the dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler
• x1 Eccentric Stop
• x1 Clamps Non-Rail (MX-A239)
• x2 Zero-line Support tab (MX-23922)
• x2 5mm Support tab (MX-23925)
• x2 Basic Clamps (MX-239241)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Sodick AQ360L
  

Product Details:

System 3R compatible MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for machines with a frame table. With the aid of MXRuler, rectangular or round workpieces, lightweight or heavy, large or small, are located on the machine zero line, without risk of collision. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• MXRuler's are available in various lengths to match different machines.
• High quality materials: Full rust proof design.
• Built-in height adjustment
• Compatible with any reference element, choose the correct one according to your machine. If you opt for a reference element, also pick up the Sliding Clamps: System 3R compatible MaxxMacro A2391 MXRuler WEDM 60mm Clamps
• The MXRuler is compatible with multiple accessories, and the dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler
• x1 Eccentric Stop
• x1 Clamps Non-Rail (MX-A239)
• x2 Zero-line Support tab (MX-23922)
• x2 5mm Support tab (MX-23925)
• x2 Basic Clamps (MX-239241)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

Product Details:

System 3R compatible MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for machines with a frame table. With the aid of MXRuler, rectangular or round workpieces, lightweight or heavy, large or small, are located on the machine zero line, without risk of collision. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• MXRuler's are available in various lengths to match different machines.
• High quality materials: Full rust proof design.
• Built-in height adjustment
• Compatible with any reference element, choose the correct one according to your machine. If you opt for a reference element, also pick up the Sliding Clamps: System 3R compatible MaxxMacro A2391 MXRuler WEDM 60mm Clamps
• The MXRuler is compatible with multiple accessories, and the dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler
• x1 Eccentric Stop
• x1 Clamps Non-Rail (MX-A239)
• x2 Zero-line Support tab (MX-23922)
• x2 5mm Support tab (MX-23925)
• x2 Basic Clamps (MX-239241)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Charmilles RoboFil 230
• Charmilles RoboFil 240
• Charmilles RoboFil 240cc
• AgieCharmilles CUT P 350
• AgieCharmilles CUT 20P
• AgieCharmilles CUT C 350
• AgieCharmilles CUT E 350
  
• Makino UPV-3
• Makino W32FB
• Makino U32
• Makino U32i
• Makino WB32B
• Makino U3 (U-shape)
  
• Makino UP32j
  
• Fanuc alpha 0iD
• Fanuc alpha 0iDP
• Fanuc alpha 0iE
• Sodick AQ327L
• Sodick VZ300L
  

Vertical setup:

• Fanuc alpha 1iA
  
• Fanuc alpha 1iB
• Fanuc alpha 1iC
• Makino U53 (Square)
• U53i (Square)
• U53j (Square)
• U53Tj (Square)
• UP53j (Square)
• UPV-5
• W53FB (Square)
• WB53B (Square)
  
• AgieCharmilles CUT 300 (yr 2012-)
• AgieCharmilles CUT 300 mS / Sp
• AgieCharmilles CUT P 550
  
• Charmilles RoboFil 430
• Charmilles RoboFil 440
  
  

Product Details:

System 3R compatible MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for machines with a frame table. With the aid of MXRuler, rectangular or round workpieces, lightweight or heavy, large or small, are located on the machine zero line, without risk of collision. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• MXRuler's are available in various lengths to match different machines.
• High quality materials: Full rust proof design.
• Built-in height adjustment
• Compatible with any reference element, choose the correct one according to your machine. If you opt for a reference element, also pick up the Sliding Clamps: System 3R compatible MaxxMacro A2391 MXRuler WEDM 60mm Clamps
• The MXRuler is compatible with multiple accessories, and the dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler
• x1 Eccentric Stop
• x1 Clamps Non-Rail (MX-A239)
• x2 Zero-line Support tab (MX-23922)
• x2 5mm Support tab (MX-23925)
• x2 Basic Clamps (MX-239241)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Vertical setup:

• Charmilles RoboFil 380
• Charmilles RoboFil 390
  

Product Details:

System 3R compatible MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for machines with a frame table. With the aid of MXRuler, rectangular or round workpieces, lightweight or heavy, large or small, are located on the machine zero line, without risk of collision. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• MXRuler's are available in various lengths to match different machines.
• High quality materials: Full rust proof design.
• Built-in height adjustment
• Compatible with any reference element, choose the correct one according to your machine. If you opt for a reference element, also pick up the Sliding Clamps: System 3R compatible MaxxMacro A2391 MXRuler WEDM 60mm Clamps
• The MXRuler is compatible with multiple accessories, and the dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler
• x1 Eccentric Stop
• x1 Clamps Non-Rail (MX-A239)
• x2 Zero-line Support tab (MX-23922)
• x2 5mm Support tab (MX-23925)
• x2 Basic Clamps (MX-239241)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Fanuc alpha C400iA
  
• Makino U3 H.E.A.T. (Square)
  
• Makino U3 (U-shape)
  
• Agie Attak
• Agie Celebration 2
• Agie Challenge 2
• Agie Classic 2
• Agie Evolution 2
• Agie Excellence 2
• Agie Progress 2
• AgieCharmilles CUT 2000 / S / X (yr 2011-)
• AgieCharmilles CUT X 350
• AgieCharmilles Progress VP2 (yr2014-2021)

Vertical setup:

• Agie Challenge 3 (Square)
• Agie Classic 3 (Square)
• Agie Evolution 3 (Square)
• Agie Excellence 3 (Square)
• Agie Progress 3
  

Product Details:

MM-RU60R435System 3R compatible MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for machines with a frame table. With the aid of MXRuler, rectangular or round workpieces, lightweight or heavy, large or small, are located on the machine zero line, without risk of collision. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• MXRuler's are available in various lengths to match different machines.
• High quality materials: Full rust proof design.
• Built-in height adjustment
• Compatible with any reference element, choose the correct one according to your machine. If you opt for a reference element, also pick up the Sliding Clamps: System 3R compatible MaxxMacro A2391 MXRuler WEDM 60mm Clamps
• The MXRuler is compatible with multiple accessories, and the dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler
• x1 Eccentric Stop
• x1 Clamps Non-Rail (MX-A239)
• x2 Zero-line Support tab (MX-23922)
• x2 5mm Support tab (MX-23925)
• x2 Basic Clamps (MX-239241)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• AgieCharmilles CUT 200 (yr 2012-)
  

Vertical setup:

• AgieCharmilles CUT 3000 / S / X (yr 2011-)
• AgieCharmilles CUT X 500
• AgieCharmilles Progress VP3 (yr2014-2021)
  

Product Details:

System 3R compatible MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for machines with a frame table. With the aid of MXRuler, rectangular or round workpieces, lightweight or heavy, large or small, are located on the machine zero line, without risk of collision. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• MXRuler's are available in various lengths to match different machines.
• High quality materials: Full rust proof design.
• Built-in height adjustment
• Compatible with any reference element, choose the correct one according to your machine. If you opt for a reference element, also pick up the Sliding Clamps: System 3R compatible MaxxMacro A2391 MXRuler WEDM 60mm Clamps
• The MXRuler is compatible with multiple accessories, and the dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler
• x1 Eccentric Stop
• x1 Clamps Non-Rail (MX-A239)
• x2 Zero-line Support tab (MX-23922)
• x2 5mm Support tab (MX-23925)
• x2 Basic Clamps (MX-239241)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Mitsubishi MP1200
• Mitsubishi MV1200R
• Mitsubishi MD Pro 3
• Mitsubishi NA12
• Mitsubishi NA1200
• Mitsubishi NA1200P
• Mitsubishi MV1200S
• Charmilles RoboFil 330
  
• Excetek V400G
  
• Fanuc alpha C400iB
• Fanuc alpha C400iC
  
• Sodick AL400G
• Sodick AL400P
• Sodick ALC400G
• Sodick ALN400G
• Sodick ALN400Q
• Sodick VL400Q
• Sodick AG400L
• Sodick AQ400L
• Sodick SL400G
• Sodick SL400Q
• Sodick SLC400G

Vertical setup:

• Fanuc alpha 1iD
• Fanuc alpha 1iDP
• Fanuc alpha 1iE
• Fanuc alpha C600iA
• Fanuc alpha C600iB
• Fanuc alpha C600iC
• Mitsubishi BA24
• Mitsubishi NA24
• Mitsubishi NA2400
• Mitsubishi NA2400P
• Mitsubishi MP2400
• Mitsubishi MV2400R / R Z+
• Mitsubishi MV2400S Z+
  
• Makino DUO64
• Makino SP64 (yr 2005-)
  

Product Details:

System 3R compatible MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for machines with a frame table. With the aid of MXRuler, rectangular or round workpieces, lightweight or heavy, large or small, are located on the machine zero line, without risk of collision. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• MXRuler's are available in various lengths to match different machines.
• High quality materials: Full rust proof design.
• Built-in height adjustment
• Compatible with any reference element, choose the correct one according to your machine. If you opt for a reference element, also pick up the Sliding Clamps: System 3R compatible MaxxMacro A2391 MXRuler WEDM 60mm Clamps
• The MXRuler is compatible with multiple accessories, and the dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler
• x1 Eccentric Stop
• x1 Clamps Non-Rail (MX-A239)
• x2 Zero-line Support tab (MX-23922)
• x2 5mm Support tab (MX-23925)
• x2 Basic Clamps (MX-239241)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• ONA AE300
• ONA AX3
• Chmer 432S

Vertical setup:

• ONA AV35
  

Product Details:

System 3R compatible MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for machines with a frame table. With the aid of MXRuler, rectangular or round workpieces, lightweight or heavy, large or small, are located on the machine zero line, without risk of collision. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• MXRuler's are available in various lengths to match different machines.
• High quality materials: Full rust proof design.
• Built-in height adjustment
• Compatible with any reference element, choose the correct one according to your machine. If you opt for a reference element, also pick up the Sliding Clamps: System 3R compatible MaxxMacro A2391 MXRuler WEDM 60mm Clamps
• The MXRuler is compatible with multiple accessories, and the dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler
• x1 Eccentric Stop
• x1 Clamps Non-Rail (MX-A239)
• x2 Zero-line Support tab (MX-23922)
• x2 5mm Support tab (MX-23925)
• x2 Basic Clamps (MX-239241)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• ONA AF25

Product Details:

System 3R compatible MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for machines with a frame table. With the aid of MXRuler, rectangular or round workpieces, lightweight or heavy, large or small, are located on the machine zero line, without risk of collision. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• MXRuler's are available in various lengths to match different machines.
• High quality materials: Full rust proof design.
• Built-in height adjustment
• Compatible with any reference element, choose the correct one according to your machine. If you opt for a reference element, also pick up the Sliding Clamps: System 3R compatible MaxxMacro A2391 MXRuler WEDM 60mm Clamps
• The MXRuler is compatible with multiple accessories, and the dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler
• x1 Eccentric Stop
• x1 Clamps Non-Rail (MX-A239)
• x2 Zero-line Support tab (MX-23922)
• x2 5mm Support tab (MX-23925)
• x2 Basic Clamps (MX-239241)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Vertical setup:

• Makino SP64 (yr -2005)
  

Product Details:

System 3R compatible MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for machines with a frame table. With the aid of MXRuler, rectangular or round workpieces, lightweight or heavy, large or small, are located on the machine zero line, without risk of collision. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• MXRuler's are available in various lengths to match different machines.
• High quality materials: Full rust proof design.
• Built-in height adjustment
• Compatible with any reference element, choose the correct one according to your machine. If you opt for a reference element, also pick up the Sliding Clamps: System 3R compatible MaxxMacro A2391 MXRuler WEDM 60mm Clamps
• The MXRuler is compatible with multiple accessories, and the dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler
• x1 Eccentric Stop
• x1 Clamps Non-Rail (MX-A239)
• x2 Zero-line Support tab (MX-23922)
• x2 5mm Support tab (MX-23925)
• x2 Basic Clamps (MX-239241)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Fanuc Alpha 1B
  
• Makino DUO43
  
• Sodick AP450L (W. 2002-)
• Sodick AP450L (yr. 2001-)
  

Vertical setup:

• AgieCharmilles CUT 30P (yr 2012-)
• AgieCharmilles CUT C 600
• AgieCharmilles CUT E 600
  
• Makino U6 H.E.A.T. (Square)
• Makino U6i (Square)
  

Product Details:

System 3R compatible MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for machines with a frame table. With the aid of MXRuler, rectangular or round workpieces, lightweight or heavy, large or small, are located on the machine zero line, without risk of collision. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• MXRuler's are available in various lengths to match different machines.
• High quality materials: Full rust proof design.
• Built-in height adjustment
• Compatible with any reference element, choose the correct one according to your machine. If you opt for a reference element, also pick up the Sliding Clamps: System 3R compatible MaxxMacro A2391 MXRuler WEDM 60mm Clamps
• The MXRuler is compatible with multiple accessories, and the dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler
• x1 Eccentric Stop
• x1 Clamps Non-Rail (MX-A239)
• x2 Zero-line Support tab (MX-23922)
• x2 5mm Support tab (MX-23925)
• x2 Basic Clamps (MX-239241)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup: