Replacement

Symmetrical jaw with an 80 mm width for MaxxVise Self-Centering Vise. This design allows the same jaw to be used on both the right and left nuts.

High-precision central screw designed specifically for the 80x120 mm MaxxVise Self-Centering Vise.

MaxxMacro 70 Pneumatic Chuck Internal Repair Kit includes O'rings, springs, bearings.

MaxxMacro 70 Manual QuickChuck Low Profile Repair Kit Rust Proof

Precision-machined threaded nut designed for the MaxxVise Self-Centering Vise.

Precision-machined threaded nut designed for the MaxxVise Self-Centering Vise.

Precision-machined threaded nut designed for the MaxxVise Self-Centering Vise.

High-precision central screw designed specifically for the 80x120 mm Self-Centering Vise. It features opposing right-hand and left-hand threads to drive both nuts simultaneously, enabling smooth, accurate, and repeatable self-centering jaw movement. Built for long-lasting performance in high-precision machining setups.

Precision-machined threaded nut designed for the MaxxVise Self-Centering Vise.

Symmetrical jaw with an 80 mm width for MaxxVise Self-Centering Vise. This design allows the same jaw to be used on both the right and left nuts.

Includes 3 pair of jaws and 1 set of screws.

Compatible with Maxx-ER and MaxxMacro UnoSet vises.

MaxxTooling Spring Loaded Probe Replacement Tip 8mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

MaxxMacro and Maxx-ER Spring Loaded Probe Replacement Tip 8mm

This tip functions on all MaxxMacro, Maxx-ER and Erowa spring loaded probes

8MM Ball Diameter

Product Details:

MaxxMacro Rail Clamps Screw Replacement MXRuler Accessory comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

MaxxMacro MXRuler WEDM Rail Clamps Screw Replacement for both MaxxMacro MXRuler A2391 WEDM 60mm Clamps and MaxxMacro MXRuler A2392 WEDM 86mm Clamps.

MaxxTooling V-Block Holder Vise Clamping shackle 20mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Spare clamping shackle for V-Block holder, for smaller parts.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

Spare Clamping shackle for Maxx-ER V-block Holder 016691 Unoset and MaxxMacro 54 HP Vblock WEDM V-block Holder for parts up to ⌀20mm.

MaxxMacro 70 Pneumatic Chuck 60281 Internal Repair Kit Rust Proof. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

Rust resistant internal replacement kit for MaxxMacro Chucks. Kit includes stainless springs, stainless bearings and o'rings. For chucks: MM-PKLPR000 (MX-60281) MM-PKLPR000D (MX-60281-ID) MM-PKMPR001 MM-PL70R000 (MX-602101)

MaxxTooling Stainless ER32 Collet Replacement Locking Nut Rust Proof can be used to complement products and product lines for various systems, such as MaxxMacro, Maxx-ER, and OEM manufacturers like System 3R and Erowa. Locking Nut for MaxxMacro collet chucks. Chrome finish, rust-proof. Fits all MaxxMacro ER32 chucks.

MaxxDesign Exclusive Features:

• Rust-proof chrome finish for long-term corrosion resistance
• Compatible with all MaxxMacro and Maxx-ER ER32 collet chucks

Product Information:

The MaxxTooling Stainless ER32 Collet Replacement Locking Nut Rust Proof is a high-quality replacement nut designed to ensure secure and accurate performance of your MaxxMacro and Maxx-ER ER32 collet chucks. Engineered for durability, this locking nut features a rust-proof, corrosion-resistant chrome finish and is fully compatible with all MaxxMacro ER32 collet chuck systems.

Made from high-strength 4CR13 SUS stainless steel, it delivers long-lasting reliability even in demanding machining environments.

MaxxTooling V-Block Holder Vise Clamping shackle 40mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Spare clamping shackle for V-Block holder.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

Spare Clamping shackle for Maxx-ER V-block Holder 016691 Unoset and MaxxMacro 54 HP Vblock WEDM V-block Holder for parts up to ⌀40mm.

MaxxVise 2.75" Self Centering Vise Replacement Jaw R comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• High quality materials.
• For MaxxVise 2.75" Self Centering Vise. Direct replacement for Right.

MaxxMacro 54 Manual Chuck 60023 QuickChuck Repair Kit Rust Proof. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• High quality materials.
• Internal Repair kit

Product Information:

Includes: Locking Ring 4 Bearings 2 Springs 4 Retainer set screw

MaxxTooling Stainless ER40 Collet Replacement Locking Nut can be used to complement products and product lines for various systems, such as MaxxMacro, Maxx-ER, and OEM manufacturers like System 3R and Erowa.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

MaxxMacro 54 ER40 Collet Chuck Locking Nut replacement nut for MaxxMacro Collet Chuck, ensuring secure and accurate operation. This nut works on all MaxxMacro, Maxx-ER - ER40 Collet chucks.

MaxxTooling Spring Loaded Probe Tip 6mm x 150mm can be used to complement products and product lines for various systems, such as MaxxMacro, Maxx-ER, and OEM manufacturers like System 3R and Erowa.

MaxxDesign Exclusive Features:

• Functions on all MaxxMacro, Maxx-ER and Erowa spring loaded probes.
• Special 150mm design

MaxxMagnum Manual Chuck Integrated Sealing Ring Spare Part comes fully assembled and ready to use.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

MaxxMagnum Chuck Integrated anti debris sealing ring helps prevent debris and contamination of mating surfaces during machining processes. Works on all MaxxMagnum Manual chucks purchased after June 22, 2022. Chucks prior to that date will require modifications (please contact us for details or if you are unsure in your chuck is compatible). We can retrofit your MaxxMagnum chuck to accept these new aluminum body anti debris sealing ring *Chuck not included; shown with chuck MM-MGMGS000

MaxxMagnum Pneumatic Chuck Integrated Sealing Ring Spare Part comes fully assembled and ready to use.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

MaxxMagnum Chuck Integrated anti debris sealing ring helps prevent debris and contamination of mating surfaces during machining processes. Works on all MaxxMagnum Pneumatic chucks purchased after June 22, 2022. Chucks prior to that date will require modifications (please contact us for details or if you are unsure in your chuck is compatible). We can retrofit your MaxxMagnum chuck to accept these new aluminum body anti debris sealing ring *Chuck not included; shown with chuck MM-PDMGS000

MaxxTooling Stainless ER32 Collet Replacement Locking Nut can be used to complement products and product lines for various systems, such as MaxxMacro, Maxx-ER, and OEM manufacturers like System 3R and Erowa.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

MaxxMacro 54 ER32 Collet Chuck Locking Nut replacement nut for MaxxMacro Collet Chuck, ensuring secure and accurate operation. This nut works on all MaxxMacro, Maxx-ER - ER32 Collet chucks.

MaxxTooling Machinists ER40 Collet Spanner Wrench Spare Part can be used to complement products and product lines for various systems, such as MaxxMacro, Maxx-ER, and OEM manufacturers like System 3R and Erowa. Collet Spanner Wrench for opening and closing ER40 collet chucks. Durable and easy to use.

MaxxVise 4.725" Self Centering Vise Replacement Screw comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• High quality materials.
• MaxxVise 4.725" Self Centering Vise Replacement Screw

MaxxVise 2.75" Self Centering Vise Replacement Screw comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

Replacement screw for MaxxVise 2.75 Inch

MaxxVise 4.725" Self Centering Vise Replacement Jaw L comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• For MaxxVise 4.725" Self Centering Vise. Direct replacement for Left
• Steps on the jaws: depth 3mm, width 2.75mm.

MaxxTooling Stainless ER16 Collet Replacement Locking Nut can be used to complement products and product lines for various systems, such as MaxxMacro, Maxx-ER, and OEM manufacturers like System 3R and Erowa. Standard Locking Nut for MaxxMacro collet chucks.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

MaxxMacro 54 ER16 Collet Chuck Locking Nut replacement nut for MaxxMacro Collet Chuck, ensuring secure and accurate operation. This nut works on all MaxxMacro, Maxx-ER - ER16 Collet chucks.

MaxxTooling Machinists ER32 Collet Spanner Wrench Spare Part can be used to complement products and product lines for various systems, such as MaxxMacro, Maxx-ER, and OEM manufacturers like System 3R and Erowa. Collet Spanner Wrench for opening and closing ER32 collet chucks. Durable and easy to use.

MaxxMacro Manual Chuck Internal Repair Kit Rust Proof.

MaxxDesign Exclusive Features:

• High quality materials.
• Internal Repair kit

Product Information:

Complete internal upgrade kit for MaxxMacro 54 D75 manual chucks. New 2021 Version with re-engineered locking screw (5MM Allen) to eliminate that screw braking, In testing System 3R OEM screws break at 9nm Maxx Tooling break at 26nm. MaxxMacro 54 Manual Chuck Internal Mechanism kit will upgrade the System 3R 3R-600.24 OEM Chucks to our MaxxMacro screw design.

MaxxVise 2.75" Self Centering Vise Replacement Jaw L comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• High quality materials.
• For MaxxVise 2.75" Self Centering Vise. Direct replacement for Left.

MaxxVise 4.725" Self Centering Vise Replacement Jaw R comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• For MaxxVise 4.725" Self Centering Vise. Direct replacement for Right
• Steps on the jaws: depth 3mm, width 2.75mm.

MaxxTooling Stationary Probe Tip Replacement 6mm x 150mm can be used to complement products and product lines for various systems, such as MaxxMacro, Maxx-ER, and OEM manufacturers like System 3R and Erowa.

MaxxDesign Exclusive Features:

• Functions on all MaxxMacro and Maxx-ER Stationary Probes.
• Special 150mm design

MaxxMacro Manual Chuck Premium Locking Screw Replacement comes fully assembled and ready to use. Replacement MaxxMacro manual chucks with Allen.

MaxxDesign Exclusive Features:

• Durable replacement locking screw for MaxxMacro chucks.
• Upgrade available for OEM chucks to reduce screw breakage.

MaxxMacro Expandable Dowel 901 Spare Part 20mm MXRefix Mandrel comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. For MXRefix: fast setup with minimal manual effort.

MaxxDesign Exclusive Features:

• 100% cross-compatible with OEM system
• Repetition accuracy 0.005 mm.

MaxxMacro Expandable Dowel 901 Spare Part 10mm MXRefix Mandrel comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. For MXRefix: fast setup with minimal manual effort.

MaxxDesign Exclusive Features:

• 100% cross-compatible with OEM system
• Repetition accuracy 0.005 mm.

MaxxTooling Spring Loaded Probe Tip 3mm ccan be used to complement products and product lines for various systems, such as MaxxMacro, Maxx-ER, and OEM manufacturers like System 3R and Erowa.

MaxxDesign Exclusive Features:

• High quality materials.
  
• Functions on all MaxxMacro, Maxx-ER and Erowa spring loaded probes.

MaxxMacro Drawbar Combi Plastic Clip SSP13854E comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Locking Ring Clip for Combi drawbars. 100% OEM compatible. Premium Injection Molded ABS. Pack of 1.

MaxxDesign Exclusive Features:

• Premium Black ABS Injection molded
• 100% cross-compatible with OEM system

Product Information:

MaxxMacro Combi Drawbar Plastic Locking Ring Clip SSP13854E is 100% cross compatible with System 3R 3R-SSP13854E Locking Ring Combi Drawbar Plastic Clip. Compatible with System 3R Macro Combi Drawbars!

MaxxTooling Stationary Probe Tip Replacement 2mm can be used to complement products and product lines for various systems, such as MaxxMacro, Maxx-ER, and OEM manufacturers like System 3R and Erowa.

MaxxDesign Exclusive Features:

• High quality materials.
  
• Functions on all MaxxMacro and Maxx-ER Stationary Probes.

MaxxTooling Spring Loaded Probe Tip 5mm can be used to complement products and product lines for various systems, such as MaxxMacro, Maxx-ER, and OEM manufacturers like System 3R and Erowa.

MaxxDesign Exclusive Features:

• High quality materials.
  
• Functions on all MaxxMacro, Maxx-ER and Erowa spring loaded probes.

MaxxTooling Spring Loaded Probe Tip 6mm can be used to complement products and product lines for various systems, such as MaxxMacro, Maxx-ER, and OEM manufacturers like System 3R and Erowa.

MaxxDesign Exclusive Features:

• High quality materials.
  
• Functions on all MaxxMacro, Maxx-ER and Erowa spring loaded probes.

MaxxMacro Drawbar Flushing O-rings 10pcs comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Seals drawbars to fixtures for rigidity. Fits all OEM & MaxxMacro style drawbars. 10pcs O-rings.

MaxxDesign Exclusive Features:

• Sold in Packs of 10 o-rings
• 100% cross-compatible with OEM system

Product Information:

Do your drawbars wiggle? Do you get misalignments? The o-ring is not only for flushing, it seals the drawbar to the holder and create a rigid installation. We recommend using the o-rings on all drawbars even if you are not using flushing through. * Note Drawbar in photo is for reference only and is not included

MaxxTooling Stainless Magnetic Probe Tip 5mm can be used to complement products and product lines for various systems, such as MaxxMacro, Maxx-ER, and OEM manufacturers like System 3R and Erowa. For secure placement on EDM or metal surfaces, ideal for generating precise centering data.

MaxxDesign Exclusive Features:

• High quality materials.
• Designed for use on EDM and other metal work surfaces.

Product Information:

MaxxTooling Stainless Magnetic Probe is designed specifically for use on Electrical Discharge Machines (EDM) and other metal work surfaces. It enables accurate and efficient centering by providing reliable reference data directly from the workpiece. Its magnetic base ensures stable placement. Ask for ball sizes: D2, D3, D4, D5, D6, D8.

Note: This probe is not designed for structural or mechanical loading. It is intended solely for alignment and data referencing purposes.

MaxxMacro Drawbar Large Oring 10pcs comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Premium large O-rings for MaxxMacro drawbars. Pack of 10.

MaxxDesign Exclusive Features:

• Sold in Packs of 10 o-rings
• 100% cross-compatible with OEM system

Product Information:

* Note Drawbar in photo is for reference only and is not included

MaxxTooling Stationary Probe Tip Replacement 3mm x 150mm can be used to complement products and product lines for various systems, such as MaxxMacro, Maxx-ER, and OEM manufacturers like System 3R and Erowa.

MaxxDesign Exclusive Features:

• Functions on all MaxxMacro and Maxx-ER Stationary Probes.
• Special 150mm design
  

MaxxTooling Stationary Probe Tip Replacement 5mm can be used to complement products and product lines for various systems, such as MaxxMacro, Maxx-ER, and OEM manufacturers like System 3R and Erowa.

MaxxDesign Exclusive Features:

• High quality materials.
  
• Functions on all MaxxMacro and Maxx-ER Stationary Probes.

MaxxTooling Stationary Probe Tip Replacement 6mm can be used to complement products and product lines for various systems, such as MaxxMacro, Maxx-ER, and OEM manufacturers like System 3R and Erowa.

MaxxDesign Exclusive Features:

• High quality materials.
  
• Functions on all MaxxMacro and Maxx-ER Stationary Probes.

MaxxTooling Stationary Probe Tip Replacement 8mm can be used to complement products and product lines for various systems, such as MaxxMacro, Maxx-ER, and OEM manufacturers like System 3R and Erowa.

MaxxDesign Exclusive Features:

• High quality materials.
  
• Functions on all MaxxMacro and Maxx-ER Stationary Probes.

MaxxTooling Stationary Probe Tip Replacement 3mm can be used to complement products and product lines for various systems, such as MaxxMacro, Maxx-ER, and OEM manufacturers like System 3R and Erowa.

MaxxDesign Exclusive Features:

• High quality materials.
  
• Functions on all MaxxMacro and Maxx-ER Stationary Probes.

MaxxTooling Spring Loaded Probe Tip 3mm x 150mm can be used to complement products and product lines for various systems, such as MaxxMacro, Maxx-ER, and OEM manufacturers like System 3R and Erowa.

MaxxDesign Exclusive Features:

• Functions on all MaxxMacro, Maxx-ER and Erowa spring loaded probes.
• Special 150mm design

MaxxTooling Spring Loaded Probe Tip 2mm can be used to complement products and product lines for various systems, such as MaxxMacro, Maxx-ER, and OEM manufacturers like System 3R and Erowa.

MaxxDesign Exclusive Features:

• High quality materials.
  
• Functions on all MaxxMacro, Maxx-ER and Erowa spring loaded probes.

MaxxTooling Spring Loaded Probe Tip 4mm can be used to complement products and product lines for various systems, such as MaxxMacro, Maxx-ER, and OEM manufacturers like System 3R and Erowa.

MaxxDesign Exclusive Features:

• High quality materials.
  
• Functions on all MaxxMacro, Maxx-ER and Erowa spring loaded probes.

MaxxTooling Stainless Magnetic Probe Tip 6mm can be used to complement products and product lines for various systems, such as MaxxMacro, Maxx-ER, and OEM manufacturers like System 3R and Erowa. For secure placement on EDM or metal surfaces, ideal for generating precise centering data.

MaxxDesign Exclusive Features:

• High quality materials.
• Designed for use on EDM and other metal work surfaces.

Product Information:

MaxxTooling Stainless Magnetic Probe is designed specifically for use on Electrical Discharge Machines (EDM) and other metal work surfaces. It enables accurate and efficient centering by providing reliable reference data directly from the workpiece. Its magnetic base ensures stable placement. Ask for ball sizes: D2, D3, D4, D5, D6, D8.

Note: This probe is not designed for structural or mechanical loading. It is intended solely for alignment and data referencing purposes.

MaxxTooling Stainless Magnetic Probe Tip 8mm can be used to complement products and product lines for various systems, such as MaxxMacro, Maxx-ER, and OEM manufacturers like System 3R and Erowa. For secure placement on EDM or metal surfaces, ideal for generating precise centering data.

MaxxDesign Exclusive Features:

• High quality materials.
• Designed for use on EDM and other metal work surfaces.

Product Information:

MaxxTooling Stainless Magnetic Probe is designed specifically for use on Electrical Discharge Machines (EDM) and other metal work surfaces. It enables accurate and efficient centering by providing reliable reference data directly from the workpiece. Its magnetic base ensures stable placement. Ask for ball sizes: D2, D3, D4, D5, D6, D8.

Note: This probe is not designed for structural or mechanical loading. It is intended solely for alignment and data referencing purposes.

MaxxMacro Drawbar Plastic Locking Ring Clip SSP07082E comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Locking Ring Clip for MaxxMacro drawbars. 100% OEM compatible. Premium Injection Molded ABS. Pack of 1.

MaxxDesign Exclusive Features:

• Premium Black ABS Injection molded
• 100% cross-compatible with OEM system

Product Information:

MaxxMacro Drawbar Plastic Locking Ring Clip SSP07082E is 100% cross compatible with System 3R 3R-SSP07082E Macro Drawbar Locking Ring Clip. Compatible with all Macro compatible Drawbars! 3R-605.1E - 3R-605.2E - 3R-605.2EE - 3R-605.2RS - 3R-605.1RS

MaxxMagnum Manual Chuck Internal Repair Kit.

MaxxTooling Cleat for Robot Gripper 96 Spare Part can be used to complement products and product lines for various systems, such as MaxxMacro, Maxx-ER, and OEM manufacturers like System 3R and Erowa. Larger low-profile cleats with innovative design for robotic fixture transport up to 25 kg.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

MaxxMacro 70 Pneumatic Chuck Internal Repair Kit Rust Proof. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxTooling Stainless ER20 Collet Replacement Locking Nut can be used to complement products and product lines for various systems, such as MaxxMacro, Maxx-ER, and OEM manufacturers like System 3R and Erowa. Standard Locking Nut for MaxxMacro collet chucks.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

MaxxMacro 54 ER20 Collet Chuck Locking Nut replacement nut for MaxxMacro Collet Chuck, ensuring secure and accurate operation. This nut works on all MaxxMacro, Maxx-ER - ER20 Collet chucks.

MaxxTooling Stainless ER20 Collet Replacement Locking Nut Rust Proof can be used to complement products and product lines for various systems, such as MaxxMacro, Maxx-ER, and OEM manufacturers like System 3R and Erowa. Locking Nut for MaxxMacro collet chucks. Chrome finish, rust-proof. Fits all MaxxMacro ER20 chucks.

MaxxDesign Exclusive Features:

• Rust-proof chrome finish for long-term corrosion resistance
• Compatible with all MaxxMacro and Maxx-ER ER20 collet chucks
  

Product Information:

The MaxxTooling Stainless ER20 Collet Replacement Locking Nut Rust Proof is a high-quality replacement nut designed to ensure secure and accurate performance of your MaxxMacro and Maxx-ER ER20 collet chucks. Engineered for durability, this locking nut features a rust-proof, corrosion-resistant chrome finish and is fully compatible with all MaxxMacro ER20 collet chuck systems.

Made from high-strength 4CR13 SUS stainless steel, it delivers long-lasting reliability even in demanding machining environments.

MaxxTooling Stationary Probe Tip Replacement 4mm can be used to complement products and product lines for various systems, such as MaxxMacro, Maxx-ER, and OEM manufacturers like System 3R and Erowa.

MaxxDesign Exclusive Features:

• High quality materials.
  
• Functions on all MaxxMacro and Maxx-ER Stationary Probes.

MaxxTooling Stainless Magnetic Probe Tip 4mm can be used to complement products and product lines for various systems, such as MaxxMacro, Maxx-ER, and OEM manufacturers like System 3R and Erowa. For secure placement on EDM or metal surfaces, ideal for generating precise centering data.

MaxxDesign Exclusive Features:

• High quality materials.
• Designed for use on EDM and other metal work surfaces.

Product Information:

MaxxTooling Stainless Magnetic Probe is designed specifically for use on Electrical Discharge Machines (EDM) and other metal work surfaces. It enables accurate and efficient centering by providing reliable reference data directly from the workpiece. Its magnetic base ensures stable placement. Ask for ball sizes: D2, D3, D4, D5, D6, D8.

Note: This probe is not designed for structural or mechanical loading. It is intended solely for alignment and data referencing purposes.

MaxxTooling Locking Bar QuickChuck Spare Part can be used to complement products and product lines for various systems, such as MaxxMacro, Maxx-ER, and OEM manufacturers like System 3R and Erowa.

Spare Locking Bar QuickChuck for our MaxxMacro and Maxx-ER QuickChucks.

Works on:

• MaxxMacro Chuck 54 Manual Quick Chuck Rust Proof (MX-3RM56W / MM-QC54R000)
• Maxx-ER Quick Chuck 34387 Premium Rust Proof (MX-QC50)

MaxxTooling Locking Bar Chuck Spare Part can be used to complement products and product lines for various systems, such as MaxxMacro, Maxx-ER, and OEM manufacturers like System 3R and Erowa.

Spare Locking Bar Chuck for our MaxxMacro and Maxx-ER Chucks.

Works on:

• MaxxMacro 54 Chuck 60023 Macro Lever Action (MM-QK54W000 / MX-600LV)
• MaxxMacro WEDM 60227 Manual Low Profile Chuck (MM-QL70R000 / MX-60227)
• Maxx-ER QuickChuck 100 P 36345 corrosion-resistant (MX-ERQK10)

MaxxMacro 54 Manual QuickChuck Repair Kit Rust Proof

MaxxDesign Exclusive Features:

• High quality materials.
• Internal Repair kit

Product Information:

MaxxMacro QuickChuck Internal Repair kit. Includes: Center Block 8mm Bearing Ball 5mm Steel Dowel Pin Compression Springs Internal Retaining Ring (Internal Seeger Ring) Socket Head Set Screws

MaxxTooling Cleat for Robot Gripper 52 Spare Part is 100% cross compatible with 5th Axis RockLock OEM System. Compact, low-profile cleats with innovative design for robotic fixture transport up to 12 kg.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

This inventive cleat design simplifies and secures the movement of tooling via robotic systems, works along the 52mm OEM Custom Gripper. The sleek, low-profile cleat seamlessly integrates all MaxxMacro prepared to mount this Cleat, and other zero point tooling (as LANG or RockLock 5th axis) as well as the most common fixtures found in machine shops, guaranteeing a safe and adaptable tool transport solution.

Innovative cleat design aimed at streamlining fixture transport without pallets. Simplifying and securing tool movement using robotic systems. The low-profile cleat effortlessly integrates with OEM tooling and commonly used fixtures. Ensuring tool transport is both safe and adaptable.

MaxxMagnum Manual Chuck Premium Locking Screw Replacement comes fully assembled and ready to use. Replacement MaxxMagnum manual chucks with Allen.

MaxxDesign Exclusive Features:

• Durable replacement locking screw for MaxxMagnum chucks.
• Replacement MaxxMagnum manual chucks with Allen.