MXRuler

MaxxMacro 2611 Adjustable Support MXRuler Accessory WEDM comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. For mounting directly on the machine table.

MaxxDesign Exclusive Features:

• High quality materials: Full 440C rust proof design.
• Adjustable length 35-135 mm.

MaxxMacro 2301 Clamping kit M6 MXRuler Accessory WEDM comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. For clamping workpieces on MXrulers, etc.

MaxxDesign Exclusive Features:

• Complete M6 clamping kit for securing workpieces.
• Compatible with MaxxMacro MXRuler and other fixturing systems

Product Information:

MaxxMacro 2301 MXRuler WEDM Clamping kit M6 provides a full set of hardware to complement your MaxxMacro MXRuler, including: MaxxMacro 239241 Basic Toe Clamps MXRuler Accessory WEDM MM-RUACR205; MaxxMacro Vise Spacer 50 mm WEDM Replacement MM-WERPW001; MaxxTooling Torque Wrench for Allen Inserts (7Nm) Spare Part MX-TRWRX007; MaxxTooling Double Side Open Wrench 10mm Spare Part MX-DSWRX010; SHCS M6x1x50mm; SHCS M6x1x40mm; SHCS M6x1x30mm; SHCS M6x1x20mm; SHCS M6x1x10mm; SSFP M6x1x50mm; SSFP M6x1x30mm; SSFP M6x1x10mm; Allen Key 5mm

MaxxMacro 2611 Adjustable Support MXRuler Accessory WEDM comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. For mounting directly on the machine table.

MaxxDesign Exclusive Features:

• High quality materials: Full 440C rust proof design.
• Adjustable length 35-135 mm.

MaxxMacro Rail Clamps Screw Replacement MXRuler Accessory comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

MaxxMacro MXRuler WEDM Rail Clamps Screw Replacement for both MaxxMacro MXRuler A2391 WEDM 60mm Clamps and MaxxMacro MXRuler A2392 WEDM 86mm Clamps.

MaxxMacro Eccentric Endstop MXRuler Accessory WEDM comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

The MaxxMacro Ruler Eccentric Endstop functions as a precise position stop on the MXRuler, ensuring accurate alignment for workpieces.

Supplied in sets of 2.

MaxxMacro 2301 Clamping kit M6 MXRuler Accessory WEDM comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. For clamping workpieces on MXrulers, etc.

MaxxDesign Exclusive Features:

• Complete M6 clamping kit for securing workpieces.
• Compatible with MaxxMacro MXRuler and other fixturing systems

Product Information:

MaxxMacro 2301 MXRuler WEDM Clamping kit M6 provides a full set of hardware to complement your MaxxMacro MXRuler, including: MaxxMacro 239241 Basic Toe Clamps MXRuler Accessory WEDM MM-RUACR205; MaxxMacro Vise Spacer 50 mm WEDM Replacement MM-WERPW001; MaxxTooling Torque Wrench for Allen Inserts (7Nm) Spare Part MX-TRWRX007; MaxxTooling Double Side Open Wrench 10mm Spare Part MX-DSWRX010; SHCS M6x1x50mm; SHCS M6x1x40mm; SHCS M6x1x30mm; SHCS M6x1x20mm; SHCS M6x1x10mm; SSFP M6x1x50mm; SSFP M6x1x30mm; SSFP M6x1x10mm; Allen Key 5mm

MaxxMacro 2015A Angle shelf MXRuler Accessory WEDM comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Mounts directly on the machine table. For vertical mounting of a MaxxMacro chuck in the machine.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

MaxxMacro 2015A WEDM Angle shelf mounts directly on the machine table. For vertical mounting of a Macro chuck in the machine. Its design ensures maximum stability for precise and reliable accuracy. Enjoying the ease of installation without the need for further attachments. MaxxMacro 2015A WEDM Angle shelf is fully compatible with System 3R macro system. *Chuck not included

MaxxMacro 239445 Double Side MXRuler Ruler 445mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Double-sided rulers are available in various lengths (-XXX), to match different machines. The cross-section is matched to the length to ensure optimal stability. With these rulers, accessories can be clamped on both sides of the ruler.

MaxxDesign Exclusive Features:

• Double-sided design for flexible setups, with enhanced rigidity thanks to upgraded dimensions: 86 mm wide (up from 60 mm) and 36 mm high (up from 30 mm)
• Compatible with any reference element (requires MaxxMacro A2392 MXRuler WEDM Sliding 86mm Clamps)

Product Information:

The MaxxMacro MXRuler is the most versatile setup for your Wire EDM machine. It is available in various lengths (-XXX) to match different machine sizes, with each length paired with a specifically designed cross-section to ensure optimal stability and performance. The MXRuler is compatible with a wide range of accessories, allowing for quick and easy mounting of workpieces of various sizes and shapes.

The MaxxMacro MXRuler includes the following items:

• 1 MaxxMacro Double MXRuler
• 2 MaxxMacro Ruler Eccentric Endstop (MM-RUACR214)
• 2 pieces of MaxxMacro MXRuler A239 WEDM Clamps non-rail (MM-RUACA103)
• 4 pieces of MaxxMacro MXRuler 23922 WEDM Stepped Support Tab (MM-RUACR203)
• 4 pieces of MaxxMacro MXRuler 23925 WEDM Standard 60mm Support Tab (MM-RUACR201)
• 4 pieces of MaxxMacro MXRuler 239241 WEDM Basic Toe Clamps (MM-RUACR205)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Mitsubishi MP1200
• Mitsubishi MV1200R
• Mitsubishi MD Pro 3
• Mitsubishi NA12
• Mitsubishi NA1200
• Mitsubishi NA1200P
• Mitsubishi MV1200S
• Charmilles RoboFil 330
  
• Excetek V400G
  
• Fanuc alpha C400iB
• Fanuc alpha C400iC
  
• Sodick AL400G
• Sodick AL400P
• Sodick ALC400G
• Sodick ALN400G
• Sodick ALN400Q
• Sodick VL400Q
• Sodick AG400L
• Sodick AQ400L
• Sodick SL400G
• Sodick SL400Q
• Sodick SLC400G

Vertical setup:

• Fanuc alpha 1iD
• Fanuc alpha 1iDP
• Fanuc alpha 1iE
• Fanuc alpha C600iA
• Fanuc alpha C600iB
• Fanuc alpha C600iC
• Mitsubishi BA24
• Mitsubishi NA24
• Mitsubishi NA2400
• Mitsubishi NA2400P
• Mitsubishi MP2400
• Mitsubishi MV2400R / R Z+
• Mitsubishi MV2400S Z+
  
• Makino DUO64
• Makino SP64 (yr 2005-)

MaxxMacro 239645 Double side MXRuler Ruler 645mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Double-sided rulers are available in various lengths (-XXX), to match different machines. The cross-section is matched to the length to ensure optimal stability. With these rulers, accessories can be clamped on both sides of the ruler.

MaxxDesign Exclusive Features:

• Double-sided design for flexible setups, with enhanced rigidity thanks to upgraded dimensions: 86 mm wide (up from 60 mm) and 36 mm high (up from 30 mm)
• Compatible with any reference element (requires MaxxMacro A2392 MXRuler WEDM Sliding 86mm Clamps)

Product Information:

The MaxxMacro MXRuler is the most versatile setup for your Wire EDM machine. It is available in various lengths (-XXX) to match different machine sizes, with each length paired with a specifically designed cross-section to ensure optimal stability and performance. The MXRuler is compatible with a wide range of accessories, allowing for quick and easy mounting of workpieces of various sizes and shapes.

The MaxxMacro MXRuler includes the following items:

• 1 MaxxMacro Double MXRuler
• 2 MaxxMacro Ruler Eccentric Endstop (MM-RUACR214)
• 2 pieces of MaxxMacro MXRuler A239 WEDM Clamps non-rail (MM-RUACA103)
• 6 pieces of MaxxMacro MXRuler 23922 WEDM Stepped Support Tab (MM-RUACR203)
• 4 pieces of MaxxMacro MXRuler 23925 WEDM Standard 60mm Support Tab (MM-RUACR201)
• 6 pieces of MaxxMacro MXRuler 239241 WEDM Basic Toe Clamps (MM-RUACR205)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Fanuc alpha C600iA
  
• Fanuc alpha C600iB
  
• Fanuc alpha C600iC
  
• Fanuc alpha 1iD
  
• Fanuc alpha 1iDP
  
• Fanuc alpha 1iE
  
• Mitsubishi MP2400
  
• Mitsubishi MV2400R / R Z+
  
• Mitsubishi MV2400S
  
• Mitsubishi MV2400S Z+
  
• Mitsubishi BA24
  
• Mitsubishi NA24
  
• Mitsubishi NA2400
  
• Mitsubishi NA2400P
  
• Mitsubishi PX05
  
• Sodick AL600G
  
• Sodick ALC600G
  
• Sodick ALN600G
  
• Sodick ALN600Q
  
• Sodick VL600Q
  
• Sodick AG600L
  
• Sodick AQ600L
• Sodick AQ600
  
• Sodick SL600G
  
• Sodick SL600P
  
• Sodick SL600Q
  
• Sodick SLC600G
  
• YCM Impuls 6

Vertical setup:

• Fanuc alpha C800iB
  
• Mitsubishi MV4800R
  
• Mitsubishi MV4800S

MaxxMacro 23926 Stepped 60mm Support Tab MXRuler Accessory WEDM (Set of 2) comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Support tab adjusted by -5 mm. For MXruler.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

MaxxMacro MXRuler 23926 WEDM Stepped 60mm Support Tab (Set of 2) for positioning workpieces 5 mm above machine zero line. This tab enables precise, accurate, and reliable positioning of workpieces, drastically reducing the time required for quality assurance in production processes. The MaxxMacro MX-23926 MXRuler WEDM Zero-line support tab is fully compatible with System 3R ruler system. Recommended maximum workpiece weight per tap 50 kg.

MaxxMacro 2015 Angle shelf MXRuler Accessory WEDM comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Mounts directly on the machine table. For vertical mounting of a MaxxMacro chuck or short reference element in the machine.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

MaxxMacro 2015 MXRuler WEDM Angle shelf mounts directly on the machine table. For vertical mounting of a Macro chuck or short reference element in the machine. Its design ensures maximum stability for precise and reliable accuracy. Enjoying the ease of installation without the need for further attachments.

MaxxMacro 239251 Standard Support Tab MXRuler Accessory WEDM (Set of 2) comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Support tab for MXruler.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

MaxxMacro MXRuler 239251 WEDM Standard Support Tab (Set of 2) for positioning workpieces on machine zero line +5mm. This tab enables precise, accurate, and reliable positioning of workpieces, drastically reducing the time required for quality assurance in production processes. Recommended maximum workpiece weight per tap 50 kg.

MaxxMacro 239241 Basic Toe Clamps MXRuler Accessory WEDM (Set of 2) comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Basic clamps for MXRuler, designed for use with tabs.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

The MaxxMacro 239241 MXRuler Basic WEDM Clamps work to secure workpieces onto the MXRuler with MaxxMacro's Zero-line support tab. MaxxMacro 239241 MXRuler Basic WEDM Clamps is 100% cross compatible with System 3R ruler These clamps are precision engineered and tested for accurate tool positioning, enabling repeatable and reliable machining results. M6 thread.

MaxxMacro A2392 86mm Clamps MXRuler Accessory WEDM (Set of 2) comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Clamps for clamping rulers on reference elements.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

MaxxMacro A2392 MXRuler WEDM Clamps facilitate the secure attachment of 86mm MXrulers to reference elements.

MaxxMacro 23925 Standard 60mm Support Tab MXRuler Accessory WEDM (Set of 2) comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Support tab for MXruler.

MaxxDesign Exclusive Features:

• Works with any MXRuler.
• Positions the workpiece 5 mm above the zero line without interfering with the lower head’s space.

MaxxMacro 23922 Stepped Support Tab MXRuler Accessory WEDM (Set of 2) comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Support tab adjusted by -5 mm. For MXruler.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

MaxxMacro MX-23922 MXRuler WEDM Zero-line support tab for positioning workpieces 5 mm above machine zero line. This tab enables precise, accurate, and reliable positioning of workpieces, drastically reducing the time required for quality assurance in production processes. Recommended maximum workpiece weight per tap 50 kg.

MaxxMacro A239 Clamps non-rail MXRuler Accessory WEDM (Set of 2) comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Clamps of aluminium for mounting a ruler directly on the machine table without reference elements.

MaxxDesign Exclusive Features:

• Works with any MXRuler.
• Allows easy and flexible direct mounting on any machine table.

MaxxMacro 225 Reference Stop MXRuler Accessory WEDM comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Can be moved infinitely along the entire reference element.

MaxxDesign Exclusive Features:

• Works with any MaxxMacro Reference Element.
• Can be moved infinitely along the entire reference element.

MaxxMacro 2391 Ruler Vise MXRuler Accessory WEDM comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Movable jaws of SuperVice design provide a wide clamping range for rectangular workpieces. Detachable Z-support tabs ensure simple setting-up.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

MaxxMacro 2391 Ruler Vise MXRuler Accessory WEDM features movable jaws for an extensive range of rectangular items and detachable Z-support tabs to ensure simple setting-up. To be mounted on MXruler. Recommended maximum workpiece weight with one vise: 15 kg. Recommended maximum workpiece weight with two vises: 200 kg.

MaxxMacro 23920 MXRuler Ruler WEDM User Kit comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Kit for clamping rectangular, round or thin workpieces.

MaxxDesign Exclusive Features:

• High quality materials: Full 440C rust proof design.
• Allows clamping of different workpiece shapes and sizes.

Product Information:

MaxxMacro 23920 MXRuler WEDM Ruler Kit is fully compatible with the System 3R ruler system. The MaxxMacro 23920 MXRuler Kit offers greater flexibility and efficiency, making it easy to integrate into workflows that switch between different systems. Designed to work seamlessly with any MXRuler (60mm or 86mm) or compatible adapter, this kit opens up a wide range of clamping options for various workpieces. MaxxMacro 23920 MXRuler WEDM Ruler Kit includes: MaxxMacro MXRuler 2391 WEDM Ruler Vise (MM-RUACR209 / MX-2391) along with a set of tabs MM-RUACR204; MaxxMacro MXRuler 2392 WEDM Low Profile Holder (MM-RUACR208 / MX-2392); MaxxMacro MXRuler 2393 WEDM Vee holder (MM-RUACR206 / MX-2393); Torque wrench, 8 Nm; Allen key, 3 mm; Allen key, 4 mm.

MaxxMacro 2392 Low Profile Holder MXRuler Accessory WEDM (Set of 4) comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. For clamping thin workpieces.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

MaxxMacro MXRuler 2392 WEDM Low Profile Holder for clamping thin workpieces. To be mounted on MXRuler. MaxxMacro MXRuler 2392 WEDM Low Profile Holder is fully compatible with System 3R ruler system. Supplied in sets of 4

MaxxMacro A2391 60mm Clamps MXRuler Accessory WEDM (Set of 2) comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Clamps for clamping rulers on reference elements.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

MaxxMacro A2391 MXRuler WEDM Clamps facilitate the secure attachment of 60mm MXrulers to reference elements.

MaxxMacro 2393 Vee holder MXRuler Accessory WEDM comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. For clamping round workpieces. To be mounted on MXruler or adapters.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

MaxxMacro MXRuler 2393 WEDM Vee holder for clamping round workpieces. To be mounted on MXruler. Clamping range Ø25-300 mm, for workpieces larger than Ø130mm the product has to be used with a second MXRuler instead of the beam supplied. Height with toe clamps: 13.5-30 mm. 3 sets of screw (M6x60; M6x80 and M6x128)

MaxxMacro 20029J1 MXRuler WEDM Reference Element 120mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Reference elements for machines with zero-line table. The length (L), hole spacing (C) and hole edge spacing (B) of the hardened reference elements are matched to the machine in question.

MaxxDesign Exclusive Features:

• Designed for mounting the MXRuler, MaxxMacro Mounting Heads, and other compatible accessories for flexible Wire EDM setups.
• High-quality materials with a fully rust-proof design for long-lasting performance

Product Information:

The MaxxMacro MXRuler Reference Element is available in various lengths to match different Wire EDM machines, with custom sizes available upon request. Each unit includes 1 MaxxMacro MXRuler Reference Element and 1 Adjustable End-Stop to support repeatable setups. Designed with a precision dovetail profile, this component serves as a mounting base not only for the MXRuler but also for a wide range of compatible MaxxMacro Wire EDM accessories. It is also compatible with MaxxMacro Leveling Heads, unlocking extensive configuration possibilities with both MXRuler accessories and Mounting Head components.

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

Vertical setup:

MaxxMacro 20029J1 MXRuler WEDM Reference Element 198mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Reference elements for machines with zero-line table. The length (L), hole spacing (C) and hole edge spacing (B) of the hardened reference elements are matched to the machine in question.

MaxxDesign Exclusive Features:

• Designed for mounting the MXRuler, MaxxMacro Mounting Heads, and other compatible accessories for flexible Wire EDM setups.
• High-quality materials with a fully rust-proof design for long-lasting performance

Product Information:

The MaxxMacro MXRuler Reference Element is available in various lengths to match different Wire EDM machines, with custom sizes available upon request. Each unit includes 1 MaxxMacro MXRuler Reference Element and 1 Adjustable End-Stop to support repeatable setups. Designed with a precision dovetail profile, this component serves as a mounting base not only for the MXRuler but also for a wide range of compatible MaxxMacro Wire EDM accessories. It is also compatible with MaxxMacro Leveling Heads, unlocking extensive configuration possibilities with both MXRuler accessories and Mounting Head components.

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

Vertical setup:

MaxxMacro 20029J1 MXRuler WEDM Reference Element 209mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Reference elements for machines with zero-line table. The length (L), hole spacing (C) and hole edge spacing (B) of the hardened reference elements are matched to the machine in question.

MaxxDesign Exclusive Features:

• Designed for mounting the MXRuler, MaxxMacro Mounting Heads, and other compatible accessories for flexible Wire EDM setups.
• High-quality materials with a fully rust-proof design for long-lasting performance

Product Information:

The MaxxMacro MXRuler Reference Element is available in various lengths to match different Wire EDM machines, with custom sizes available upon request. Each unit includes 1 MaxxMacro MXRuler Reference Element and 1 Adjustable End-Stop to support repeatable setups. Designed with a precision dovetail profile, this component serves as a mounting base not only for the MXRuler but also for a wide range of compatible MaxxMacro Wire EDM accessories. It is also compatible with MaxxMacro Leveling Heads, unlocking extensive configuration possibilities with both MXRuler accessories and Mounting Head components.

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

Vertical setup:

MaxxMacro 20029J1 MXRuler WEDM Reference Element 199mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Reference elements for machines with zero-line table. The length (L), hole spacing (C) and hole edge spacing (B) of the hardened reference elements are matched to the machine in question.

MaxxDesign Exclusive Features:

• Designed for mounting the MXRuler, MaxxMacro Mounting Heads, and other compatible accessories for flexible Wire EDM setups.
• High-quality materials with a fully rust-proof design for long-lasting performance

Product Information:

The MaxxMacro MXRuler Reference Element is available in various lengths to match different Wire EDM machines, with custom sizes available upon request. Each unit includes 1 MaxxMacro MXRuler Reference Element and 1 Adjustable End-Stop to support repeatable setups. Designed with a precision dovetail profile, this component serves as a mounting base not only for the MXRuler but also for a wide range of compatible MaxxMacro Wire EDM accessories. It is also compatible with MaxxMacro Leveling Heads, unlocking extensive configuration possibilities with both MXRuler accessories and Mounting Head components.

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

Vertical setup:

MaxxMacro 20029J1 MXRuler WEDM Reference Element 298mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Reference elements for machines with zero-line table. The length (L), hole spacing (C) and hole edge spacing (B) of the hardened reference elements are matched to the machine in question.

MaxxDesign Exclusive Features:

• Designed for mounting the MXRuler, MaxxMacro Mounting Heads, and other compatible accessories for flexible Wire EDM setups.
• High-quality materials with a fully rust-proof design for long-lasting performance

Product Information:

The MaxxMacro MXRuler Reference Element is available in various lengths to match different Wire EDM machines, with custom sizes available upon request. Each unit includes 1 MaxxMacro MXRuler Reference Element and 1 Adjustable End-Stop to support repeatable setups. Designed with a precision dovetail profile, this component serves as a mounting base not only for the MXRuler but also for a wide range of compatible MaxxMacro Wire EDM accessories. It is also compatible with MaxxMacro Leveling Heads, unlocking extensive configuration possibilities with both MXRuler accessories and Mounting Head components.

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

Vertical setup:

MaxxMacro 2004J11 MXRuler WEDM Reference Element 398mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Reference elements for machines with zero-line table. The length (L), hole spacing (C) and hole edge spacing (B) of the hardened reference elements are matched to the machine in question.

MaxxDesign Exclusive Features:

• Designed for mounting the MXRuler, MaxxMacro Mounting Heads, and other compatible accessories for flexible Wire EDM setups.
• High-quality materials with a fully rust-proof design for long-lasting performance

Product Information:

The MaxxMacro MXRuler Reference Element is available in various lengths to match different Wire EDM machines, with custom sizes available upon request. Each unit includes 1 MaxxMacro MXRuler Reference Element and 1 Adjustable End-Stop to support repeatable setups. Designed with a precision dovetail profile, this component serves as a mounting base not only for the MXRuler but also for a wide range of compatible MaxxMacro Wire EDM accessories. It is also compatible with MaxxMacro Leveling Heads, unlocking extensive configuration possibilities with both MXRuler accessories and Mounting Head components.

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

Vertical setup:

MaxxMacro 239410 MXRuler Ruler 410mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. The rulers are available in various lengths (-XXX), to match different machines. The cross-section is matched to the length to ensure optimal stability.

MaxxDesign Exclusive Features:

• Fully rust-proof design with built-in height adjustment
• Compatible with any reference element (requires MaxxMacro A2391 WEDM 60mm Sliding Clamps when used)

Product Information:

The MaxxMacro MXRuler is the most versatile setup for your Wire EDM machine. It is available in various lengths (-XXX) to match different machine sizes, with each length paired with a specifically designed cross-section to ensure optimal stability and performance. The MXRuler is compatible with a wide range of accessories, allowing for quick and easy mounting of workpieces of various sizes and shapes.

The MaxxMacro MXRuler includes the following items:

• 1 MaxxMacro MXRuler
• 1 MaxxMacro Ruler Eccentric Endstop (MM-RUACR214)
• 2 pieces of MaxxMacro MXRuler A239 WEDM Clamps non-rail (MM-RUACA103)
• 2 pieces of MaxxMacro MXRuler 23922 WEDM Stepped Support Tab (MM-RUACR203)
• 2 pieces of MaxxMacro MXRuler 23925 WEDM Standard 60mm Support Tab (MM-RUACR201)
• 2 pieces of MaxxMacro MXRuler 239241 WEDM Basic Toe Clamps (MM-RUACR205)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

MaxxMacro 239950 MXRuler Ruler 950mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. The rulers are available in various lengths (-XXX), to match different machines. The cross-section is matched to the length to ensure optimal stability.

MaxxDesign Exclusive Features:

• Enhanced rigidity with upgraded dimensions: 86 mm wide (up from 60 mm) and 36 mm high (up from 30 mm)
• Compatible with any reference element (requires MaxxMacro A2392 MXRuler WEDM Sliding 86mm Clamps)

Product Information:

The MaxxMacro MXRuler is the most versatile setup for your Wire EDM machine. It is available in various lengths (-XXX) to match different machine sizes, with each length paired with a specifically designed cross-section to ensure optimal stability and performance. The MXRuler is compatible with a wide range of accessories, allowing for quick and easy mounting of workpieces of various sizes and shapes.

The MaxxMacro MXRuler includes the following items:

• 1 MaxxMacro MXRuler
• 1 MaxxMacro Ruler Eccentric Endstop (MM-RUACR214)
• 2 pieces of MaxxMacro MXRuler A239 WEDM Clamps non-rail (MM-RUACA103)
• 3 pieces of MaxxMacro MXRuler 23922 WEDM Stepped Support Tab (MM-RUACR203)
• 2 pieces of MaxxMacro MXRuler 23925 WEDM Standard 60mm Support Tab (MM-RUACR201)
• 3 pieces of MaxxMacro MXRuler 239241 WEDM Basic Toe Clamps (MM-RUACR205)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

MaxxMacro 239355 MXRuler Ruler 355mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. The rulers are available in various lengths (-XXX), to match different machines. The cross-section is matched to the length to ensure optimal stability.

MaxxDesign Exclusive Features:

• Fully rust-proof design with built-in height adjustment
• Compatible with any reference element (requires MaxxMacro A2391 WEDM 60mm Sliding Clamps when used)

Product Information:

The MaxxMacro MXRuler is the most versatile setup for your Wire EDM machine. It is available in various lengths (-XXX) to match different machine sizes, with each length paired with a specifically designed cross-section to ensure optimal stability and performance. The MXRuler is compatible with a wide range of accessories, allowing for quick and easy mounting of workpieces of various sizes and shapes.

The MaxxMacro MXRuler includes the following items:

• 1 MaxxMacro MXRuler
• 1 MaxxMacro Ruler Eccentric Endstop (MM-RUACR214)
• 2 pieces of MaxxMacro MXRuler A239 WEDM Clamps non-rail (MM-RUACA103)
• 2 pieces of MaxxMacro MXRuler 23922 WEDM Stepped Support Tab (MM-RUACR203)
• 2 pieces of MaxxMacro MXRuler 23925 WEDM Standard 60mm Support Tab (MM-RUACR201)
• 2 pieces of MaxxMacro MXRuler 239241 WEDM Basic Toe Clamps (MM-RUACR205)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

Vertical setup:

MaxxMacro 20029J1 MXRuler WEDM Reference Element 98mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Reference elements for machines with zero-line table. The length (L), hole spacing (C) and hole edge spacing (B) of the hardened reference elements are matched to the machine in question.

MaxxDesign Exclusive Features:

• Designed for mounting the MXRuler, MaxxMacro Mounting Heads, and other compatible accessories for flexible Wire EDM setups.
• High-quality materials with a fully rust-proof design for long-lasting performance

Product Information:

The MaxxMacro MXRuler Reference Element is available in various lengths to match different Wire EDM machines, with custom sizes available upon request. Each unit includes 1 MaxxMacro MXRuler Reference Element and 1 Adjustable End-Stop to support repeatable setups. Designed with a precision dovetail profile, this component serves as a mounting base not only for the MXRuler but also for a wide range of compatible MaxxMacro Wire EDM accessories. It is also compatible with MaxxMacro Leveling Heads, unlocking extensive configuration possibilities with both MXRuler accessories and Mounting Head components.

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

Vertical setup:

MaxxMacro 20029J1 MXRuler WEDM Reference Element 145mm (20 pcs) comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Reference elements for machines with zero-line table. The length (L), hole spacing (C) and hole edge spacing (B) of the hardened reference elements are matched to the machine in question.

MaxxDesign Exclusive Features:

• Designed for mounting the MXRuler, MaxxMacro Mounting Heads, and other compatible accessories for flexible Wire EDM setups.
• High-quality materials with a fully rust-proof design for long-lasting performance

Product Information:

The MaxxMacro MXRuler Reference Element is available in various lengths to match different Wire EDM machines, with custom sizes available upon request. Each unit includes 1 MaxxMacro MXRuler Reference Element and 1 Adjustable End-Stop to support repeatable setups. Designed with a precision dovetail profile, this component serves as a mounting base not only for the MXRuler but also for a wide range of compatible MaxxMacro Wire EDM accessories. It is also compatible with MaxxMacro Leveling Heads, unlocking extensive configuration possibilities with both MXRuler accessories and Mounting Head components.

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

Vertical setup:

MaxxMacro 239295 MXRuler Ruler 295mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. The rulers are available in various lengths (-XXX), to match different machines. The cross-section is matched to the length to ensure optimal stability.

MaxxDesign Exclusive Features:

• Fully rust-proof design with built-in height adjustment
• Compatible with any reference element (requires MaxxMacro A2391 WEDM 60mm Sliding Clamps when used)

Product Information:

The MaxxMacro MXRuler is the most versatile setup for your Wire EDM machine. It is available in various lengths (-XXX) to match different machine sizes, with each length paired with a specifically designed cross-section to ensure optimal stability and performance. The MXRuler is compatible with a wide range of accessories, allowing for quick and easy mounting of workpieces of various sizes and shapes.

The MaxxMacro MXRuler includes the following items:

• 1 MaxxMacro MXRuler
• 1 MaxxMacro Ruler Eccentric Endstop (MM-RUACR214)
• 2 pieces of MaxxMacro MXRuler A239 WEDM Clamps non-rail (MM-RUACA103)
• 2 pieces of MaxxMacro MXRuler 23922 WEDM Stepped Support Tab (MM-RUACR203)
• 2 pieces of MaxxMacro MXRuler 23925 WEDM Standard 60mm Support Tab (MM-RUACR201)
• 2 pieces of MaxxMacro MXRuler 239241 WEDM Basic Toe Clamps (MM-RUACR205)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Seibu M25LP
• Sodick AP250L

Vertical setup:

• Seibu M25LP
• Mitsubishi FA10-S Advance
• Mitsubishi FA10
• Mitsubishi FA10 SM
• Mitsubishi FX10
• Mitsubishi FX10 K
• Mitsubishi SX1
• Mitsubishi SX10
• Charmilles RoboFil 230
• Charmilles RoboFil 240
• Charmilles RoboFil 240cc
  

MaxxMacro 20029J1 MXRuler WEDM Reference Element 145mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Reference elements for machines with zero-line table. The length (L), hole spacing (C) and hole edge spacing (B) of the hardened reference elements are matched to the machine in question.

MaxxDesign Exclusive Features:

• Designed for mounting the MXRuler, MaxxMacro Mounting Heads, and other compatible accessories for flexible Wire EDM setups.
• High-quality materials with a fully rust-proof design for long-lasting performance

Product Information:

The MaxxMacro MXRuler Reference Element is available in various lengths to match different Wire EDM machines, with custom sizes available upon request. Each unit includes 1 MaxxMacro MXRuler Reference Element and 1 Adjustable End-Stop to support repeatable setups. Designed with a precision dovetail profile, this component serves as a mounting base not only for the MXRuler but also for a wide range of compatible MaxxMacro Wire EDM accessories. It is also compatible with MaxxMacro Leveling Heads, unlocking extensive configuration possibilities with both MXRuler accessories and Mounting Head components.

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

Vertical setup:

MaxxMacro 239315 MXRuler Ruler 315mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. The rulers are available in various lengths (-XXX), to match different machines. The cross-section is matched to the length to ensure optimal stability.

MaxxDesign Exclusive Features:

• Fully rust-proof design with built-in height adjustment
• Compatible with any reference element (requires MaxxMacro A2391 WEDM 60mm Sliding Clamps when used)

Product Information:

The MaxxMacro MXRuler is the most versatile setup for your Wire EDM machine. It is available in various lengths (-XXX) to match different machine sizes, with each length paired with a specifically designed cross-section to ensure optimal stability and performance. The MXRuler is compatible with a wide range of accessories, allowing for quick and easy mounting of workpieces of various sizes and shapes.

The MaxxMacro MXRuler includes the following items:

• 1 MaxxMacro MXRuler
• 1 MaxxMacro Ruler Eccentric Endstop (MM-RUACR214)
• 2 pieces of MaxxMacro MXRuler A239 WEDM Clamps non-rail (MM-RUACA103)
• 2 pieces of MaxxMacro MXRuler 23922 WEDM Stepped Support Tab (MM-RUACR203)
• 2 pieces of MaxxMacro MXRuler 23925 WEDM Standard 60mm Support Tab (MM-RUACR201)
• 2 pieces of MaxxMacro MXRuler 239241 WEDM Basic Toe Clamps (MM-RUACR205)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Vertical setup:

• AgieCharmilles CUT 20P
  
• AgieCharmilles CUT C 350
  
• AgieCharmilles CUT E 350
  
• Makino U3 H.E.A.T. (Square)
  
• Makino U3i (Square)
  
• Makino U32j (Square)
  
• Makino UP32j (Square)
  
• Makino UPV-3
  
• Makino W32FB (Square)
  
• Makino U32 (Square)
  
• Makino U32i (Square)
  
• Makino WB32B (Square)
  

MaxxMacro 239310 MXRuler Ruler 310mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. The rulers are available in various lengths (-XXX), to match different machines. The cross-section is matched to the length to ensure optimal stability.

MaxxDesign Exclusive Features:

• Fully rust-proof design with built-in height adjustment
• Compatible with any reference element (requires MaxxMacro A2391 WEDM 60mm Sliding Clamps when used)

Product Information:

The MaxxMacro MXRuler is the most versatile setup for your Wire EDM machine. It is available in various lengths (-XXX) to match different machine sizes, with each length paired with a specifically designed cross-section to ensure optimal stability and performance. The MXRuler is compatible with a wide range of accessories, allowing for quick and easy mounting of workpieces of various sizes and shapes.

The MaxxMacro MXRuler includes the following items:

• 1 MaxxMacro MXRuler
• 1 MaxxMacro Ruler Eccentric Endstop (MM-RUACR214)
• 2 pieces of MaxxMacro MXRuler A239 WEDM Clamps non-rail (MM-RUACA103)
• 2 pieces of MaxxMacro MXRuler 23922 WEDM Stepped Support Tab (MM-RUACR203)
• 2 pieces of MaxxMacro MXRuler 23925 WEDM Standard 60mm Support Tab (MM-RUACR201)
• 2 pieces of MaxxMacro MXRuler 239241 WEDM Basic Toe Clamps (MM-RUACR205)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Vertical setup:

• AgieCharmilles CUT 200 (yr 2012-)
  
• AgieCharmilles CUT 200 Bp
  
• AgieCharmilles CUT 200 C / P
  
• AgieCharmilles CUT 200 mS / Sp
  
• AgieCharmilles CUT P 350
  

MaxxMacro 239325 MXRuler Ruler 325mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. The rulers are available in various lengths (-XXX), to match different machines. The cross-section is matched to the length to ensure optimal stability.

MaxxDesign Exclusive Features:

• Fully rust-proof design with built-in height adjustment
• Compatible with any reference element (requires MaxxMacro A2391 WEDM 60mm Sliding Clamps when used)

Product Information:

The MaxxMacro MXRuler is the most versatile setup for your Wire EDM machine. It is available in various lengths (-XXX) to match different machine sizes, with each length paired with a specifically designed cross-section to ensure optimal stability and performance. The MXRuler is compatible with a wide range of accessories, allowing for quick and easy mounting of workpieces of various sizes and shapes.

The MaxxMacro MXRuler includes the following items:

• 1 MaxxMacro MXRuler
• 1 MaxxMacro Ruler Eccentric Endstop (MM-RUACR214)
• 2 pieces of MaxxMacro MXRuler A239 WEDM Clamps non-rail (MM-RUACA103)
• 2 pieces of MaxxMacro MXRuler 23922 WEDM Stepped Support Tab (MM-RUACR203)
• 2 pieces of MaxxMacro MXRuler 23925 WEDM Standard 60mm Support Tab (MM-RUACR201)
• 2 pieces of MaxxMacro MXRuler 239241 WEDM Basic Toe Clamps (MM-RUACR205)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Vertical setup:

• Agie Attak
  
• Agie Celebration 2 (Square)
  
• Agie Challenge 2 (Square)
  
• Agie Classic 2 (Square)
  
• Agie Evolution 2 (Square)
  
• Agie Excellence 2 (Square)
  
• Agie Progress 2
  

MaxxMacro 239330 MXRuler Ruler 330mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. The rulers are available in various lengths (-XXX), to match different machines. The cross-section is matched to the length to ensure optimal stability.

MaxxDesign Exclusive Features:

• Fully rust-proof design with built-in height adjustment
• Compatible with any reference element (requires MaxxMacro A2391 WEDM 60mm Sliding Clamps when used)

Product Information:

The MaxxMacro MXRuler is the most versatile setup for your Wire EDM machine. It is available in various lengths (-XXX) to match different machine sizes, with each length paired with a specifically designed cross-section to ensure optimal stability and performance. The MXRuler is compatible with a wide range of accessories, allowing for quick and easy mounting of workpieces of various sizes and shapes.

The MaxxMacro MXRuler includes the following items:

• 1 MaxxMacro MXRuler
• 1 MaxxMacro Ruler Eccentric Endstop (MM-RUACR214)
• 2 pieces of MaxxMacro MXRuler A239 WEDM Clamps non-rail (MM-RUACA103)
• 2 pieces of MaxxMacro MXRuler 23922 WEDM Stepped Support Tab (MM-RUACR203)
• 2 pieces of MaxxMacro MXRuler 23925 WEDM Standard 60mm Support Tab (MM-RUACR201)
• 2 pieces of MaxxMacro MXRuler 239241 WEDM Basic Toe Clamps (MM-RUACR205)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Vertical setup:

• AgieCharmilles CUT 2000 / S / X (yr 2011-)
  
• AgieCharmilles CUT X 350
  
• AgieCharmilles Progress VP2 (yr2014-2021)
  

MaxxMacro 239405 MXRuler Ruler 405mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. The rulers are available in various lengths (-XXX), to match different machines. The cross-section is matched to the length to ensure optimal stability.

MaxxDesign Exclusive Features:

• Fully rust-proof design with built-in height adjustment
• Compatible with any reference element (requires MaxxMacro A2391 WEDM 60mm Sliding Clamps when used)

Product Information:

The MaxxMacro MXRuler is the most versatile setup for your Wire EDM machine. It is available in various lengths (-XXX) to match different machine sizes, with each length paired with a specifically designed cross-section to ensure optimal stability and performance. The MXRuler is compatible with a wide range of accessories, allowing for quick and easy mounting of workpieces of various sizes and shapes.

The MaxxMacro MXRuler includes the following items:

• 1 MaxxMacro MXRuler
• 1 MaxxMacro Ruler Eccentric Endstop (MM-RUACR214)
• 2 pieces of MaxxMacro MXRuler A239 WEDM Clamps non-rail (MM-RUACA103)
• 2 pieces of MaxxMacro MXRuler 23922 WEDM Stepped Support Tab (MM-RUACR203)
• 2 pieces of MaxxMacro MXRuler 23925 WEDM Standard 60mm Support Tab (MM-RUACR201)
• 2 pieces of MaxxMacro MXRuler 239241 WEDM Basic Toe Clamps (MM-RUACR205)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Sodick AQ360L
  

MaxxMacro 239465 MXRuler Ruler 465mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. The rulers are available in various lengths (-XXX), to match different machines. The cross-section is matched to the length to ensure optimal stability.

MaxxDesign Exclusive Features:

• Fully rust-proof design with built-in height adjustment
• Compatible with any reference element (requires MaxxMacro A2391 WEDM 60mm Sliding Clamps when used)

Product Information:

The MaxxMacro MXRuler is the most versatile setup for your Wire EDM machine. It is available in various lengths (-XXX) to match different machine sizes, with each length paired with a specifically designed cross-section to ensure optimal stability and performance. The MXRuler is compatible with a wide range of accessories, allowing for quick and easy mounting of workpieces of various sizes and shapes.

The MaxxMacro MXRuler includes the following items:

• 1 MaxxMacro MXRuler
• 1 MaxxMacro Ruler Eccentric Endstop (MM-RUACR214)
• 2 pieces of MaxxMacro MXRuler A239 WEDM Clamps non-rail (MM-RUACA103)
• 2 pieces of MaxxMacro MXRuler 23922 WEDM Stepped Support Tab (MM-RUACR203)
• 2 pieces of MaxxMacro MXRuler 23925 WEDM Standard 60mm Support Tab (MM-RUACR201)
• 2 pieces of MaxxMacro MXRuler 239241 WEDM Basic Toe Clamps (MM-RUACR205)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Vertical setup:

• Makino SP64 (yr -2005)
  

MaxxMacro 239525 MXRuler Ruler 525mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. The rulers are available in various lengths (-XXX), to match different machines. The cross-section is matched to the length to ensure optimal stability.

MaxxDesign Exclusive Features:

• Fully rust-proof design with built-in height adjustment
• Compatible with any reference element (requires MaxxMacro A2391 WEDM 60mm Sliding Clamps when used)

Product Information:

The MaxxMacro MXRuler is the most versatile setup for your Wire EDM machine. It is available in various lengths (-XXX) to match different machine sizes, with each length paired with a specifically designed cross-section to ensure optimal stability and performance. The MXRuler is compatible with a wide range of accessories, allowing for quick and easy mounting of workpieces of various sizes and shapes.

The MaxxMacro MXRuler includes the following items:

• 1 MaxxMacro MXRuler
• 1 MaxxMacro Ruler Eccentric Endstop (MM-RUACR214)
• 2 pieces of MaxxMacro MXRuler A239 WEDM Clamps non-rail (MM-RUACA103)
• 2 pieces of MaxxMacro MXRuler 23922 WEDM Stepped Support Tab (MM-RUACR203)
• 2 pieces of MaxxMacro MXRuler 23925 WEDM Standard 60mm Support Tab (MM-RUACR201)
• 2 pieces of MaxxMacro MXRuler 239241 WEDM Basic Toe Clamps (MM-RUACR205)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Vertical setup:

• Makino PX36
  
• Makino UP6
  

MaxxMacro 239550 MXRuler Ruler 550mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. The rulers are available in various lengths (-XXX), to match different machines. The cross-section is matched to the length to ensure optimal stability.

MaxxDesign Exclusive Features:

• Enhanced rigidity with upgraded dimensions: 86 mm wide (up from 60 mm) and 36 mm high (up from 30 mm)
• Compatible with any reference element (requires MaxxMacro A2392 MXRuler WEDM Sliding 86mm Clamps)

Product Information:

The MaxxMacro MXRuler is the most versatile setup for your Wire EDM machine. It is available in various lengths (-XXX) to match different machine sizes, with each length paired with a specifically designed cross-section to ensure optimal stability and performance. The MXRuler is compatible with a wide range of accessories, allowing for quick and easy mounting of workpieces of various sizes and shapes.

The MaxxMacro MXRuler includes the following items:

• 1 MaxxMacro MXRuler
• 1 MaxxMacro Ruler Eccentric Endstop (MM-RUACR214)
• 2 pieces of MaxxMacro MXRuler A239 WEDM Clamps non-rail (MM-RUACA103)
• 3 pieces of MaxxMacro MXRuler 23922 WEDM Stepped Support Tab (MM-RUACR203)
• 2 pieces of MaxxMacro MXRuler 23925 WEDM Standard 60mm Support Tab (MM-RUACR201)
• 3 pieces of MaxxMacro MXRuler 239241 WEDM Basic Toe Clamps (MM-RUACR205)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• YCM Impuls 5
  

Vertical setup:

MaxxMacro 239850 MXRuler Ruler 850mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. The rulers are available in various lengths (-XXX), to match different machines. The cross-section is matched to the length to ensure optimal stability.

MaxxDesign Exclusive Features:

• Enhanced rigidity with upgraded dimensions: 86 mm wide (up from 60 mm) and 36 mm high (up from 30 mm)
• Compatible with any reference element (requires MaxxMacro A2392 MXRuler WEDM Sliding 86mm Clamps)

Product Information:

The MaxxMacro MXRuler is the most versatile setup for your Wire EDM machine. It is available in various lengths (-XXX) to match different machine sizes, with each length paired with a specifically designed cross-section to ensure optimal stability and performance. The MXRuler is compatible with a wide range of accessories, allowing for quick and easy mounting of workpieces of various sizes and shapes.

The MaxxMacro MXRuler includes the following items:

• 1 MaxxMacro MXRuler
• 1 MaxxMacro Ruler Eccentric Endstop (MM-RUACR214)
• 2 pieces of MaxxMacro MXRuler A239 WEDM Clamps non-rail (MM-RUACA103)
• 3 pieces of MaxxMacro MXRuler 23922 WEDM Stepped Support Tab (MM-RUACR203)
• 2 pieces of MaxxMacro MXRuler 23925 WEDM Standard 60mm Support Tab (MM-RUACR201)
• 3 pieces of MaxxMacro MXRuler 239241 WEDM Basic Toe Clamps (MM-RUACR205)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

Vertical setup:

MaxxMacro 239625 MXRuler Ruler 625mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. The rulers are available in various lengths (-XXX), to match different machines. The cross-section is matched to the length to ensure optimal stability.

MaxxDesign Exclusive Features:

• Enhanced rigidity with upgraded dimensions: 86 mm wide (up from 60 mm) and 36 mm high (up from 30 mm)
• Compatible with any reference element (requires MaxxMacro A2392 MXRuler WEDM Sliding 86mm Clamps)

Product Information:

The MaxxMacro MXRuler is the most versatile setup for your Wire EDM machine. It is available in various lengths (-XXX) to match different machine sizes, with each length paired with a specifically designed cross-section to ensure optimal stability and performance. The MXRuler is compatible with a wide range of accessories, allowing for quick and easy mounting of workpieces of various sizes and shapes.

The MaxxMacro MXRuler includes the following items:

• 1 MaxxMacro MXRuler
• 1 MaxxMacro Ruler Eccentric Endstop (MM-RUACR214)
• 2 pieces of MaxxMacro MXRuler A239 WEDM Clamps non-rail (MM-RUACA103)
• 3 pieces of MaxxMacro MXRuler 23922 WEDM Stepped Support Tab (MM-RUACR203)
• 2 pieces of MaxxMacro MXRuler 23925 WEDM Standard 60mm Support Tab (MM-RUACR201)
• 3 pieces of MaxxMacro MXRuler 239241 WEDM Basic Toe Clamps (MM-RUACR205)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

Vertical setup:

MaxxMacro 239650 MXRuler Ruler 650mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. The rulers are available in various lengths (-XXX), to match different machines. The cross-section is matched to the length to ensure optimal stability.

MaxxDesign Exclusive Features:

• Enhanced rigidity with upgraded dimensions: 86 mm wide (up from 60 mm) and 36 mm high (up from 30 mm)
• Compatible with any reference element (requires MaxxMacro A2392 MXRuler WEDM Sliding 86mm Clamps)

Product Information:

The MaxxMacro MXRuler is the most versatile setup for your Wire EDM machine. It is available in various lengths (-XXX) to match different machine sizes, with each length paired with a specifically designed cross-section to ensure optimal stability and performance. The MXRuler is compatible with a wide range of accessories, allowing for quick and easy mounting of workpieces of various sizes and shapes.

The MaxxMacro MXRuler includes the following items:

• 1 MaxxMacro MXRuler
• 1 MaxxMacro Ruler Eccentric Endstop (MM-RUACR214)
• 2 pieces of MaxxMacro MXRuler A239 WEDM Clamps non-rail (MM-RUACA103)
• 3 pieces of MaxxMacro MXRuler 23922 WEDM Stepped Support Tab (MM-RUACR203)
• 2 pieces of MaxxMacro MXRuler 23925 WEDM Standard 60mm Support Tab (MM-RUACR201)
• 3 pieces of MaxxMacro MXRuler 239241 WEDM Basic Toe Clamps (MM-RUACR205)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• YCM Impuls 6
  

Vertical setup:

MaxxMacro 239350 MXRuler Ruler 350mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. The rulers are available in various lengths (-XXX), to match different machines. The cross-section is matched to the length to ensure optimal stability.

MaxxDesign Exclusive Features:

• Fully rust-proof design with built-in height adjustment
• Compatible with any reference element (requires MaxxMacro A2391 WEDM 60mm Sliding Clamps when used)

Product Information:

The MaxxMacro MXRuler is the most versatile setup for your Wire EDM machine. It is available in various lengths (-XXX) to match different machine sizes, with each length paired with a specifically designed cross-section to ensure optimal stability and performance. The MXRuler is compatible with a wide range of accessories, allowing for quick and easy mounting of workpieces of various sizes and shapes.

The MaxxMacro MXRuler includes the following items:

• 1 MaxxMacro MXRuler
• 1 MaxxMacro Ruler Eccentric Endstop (MM-RUACR214)
• 2 pieces of MaxxMacro MXRuler A239 WEDM Clamps non-rail (MM-RUACA103)
• 2 pieces of MaxxMacro MXRuler 23922 WEDM Stepped Support Tab (MM-RUACR203)
• 2 pieces of MaxxMacro MXRuler 23925 WEDM Standard 60mm Support Tab (MM-RUACR201)
• 2 pieces of MaxxMacro MXRuler 239241 WEDM Basic Toe Clamps (MM-RUACR205)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

Vertical setup:

MaxxMacro 20012J7 MXRuler WEDM Reference Element 500mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Reference elements for machines with zero-line table. The length (L), hole spacing (C) and hole edge spacing (B) of the hardened reference elements are matched to the machine in question.

MaxxDesign Exclusive Features:

• Designed for mounting the MXRuler, MaxxMacro Mounting Heads, and other compatible accessories for flexible Wire EDM setups.
• High-quality materials with a fully rust-proof design for long-lasting performance

Product Information:

The MaxxMacro MXRuler Reference Element is available in various lengths to match different Wire EDM machines, with custom sizes available upon request. Each unit includes 1 MaxxMacro MXRuler Reference Element and 1 Adjustable End-Stop to support repeatable setups. Designed with a precision dovetail profile, this component serves as a mounting base not only for the MXRuler but also for a wide range of compatible MaxxMacro Wire EDM accessories. It is also compatible with MaxxMacro Leveling Heads, unlocking extensive configuration possibilities with both MXRuler accessories and Mounting Head components.

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Charmilles RoboFil 500
  
• Charmilles RoboFil 504
  
• Charmilles RoboFil 510

Vertical setup:

• Charmilles RoboFil 290
  
• Charmilles RoboFil 300
  
• Charmilles RoboFil 304
  
• Charmilles RoboFil 310
  

MaxxMacro 239618 MXRuler Ruler 618mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. The rulers are available in various lengths (-XXX), to match different machines. The cross-section is matched to the length to ensure optimal stability.

MaxxDesign Exclusive Features:

• Enhanced rigidity with upgraded dimensions: 86 mm wide (up from 60 mm) and 36 mm high (up from 30 mm)
• Compatible with any reference element (requires MaxxMacro A2392 MXRuler WEDM Sliding 86mm Clamps)

Product Information:

The MaxxMacro MXRuler is the most versatile setup for your Wire EDM machine. It is available in various lengths (-XXX) to match different machine sizes, with each length paired with a specifically designed cross-section to ensure optimal stability and performance. The MXRuler is compatible with a wide range of accessories, allowing for quick and easy mounting of workpieces of various sizes and shapes.

The MaxxMacro MXRuler includes the following items:

• 1 MaxxMacro MXRuler
• 1 MaxxMacro Ruler Eccentric Endstop (MM-RUACR214)
• 2 pieces of MaxxMacro MXRuler A239 WEDM Clamps non-rail (MM-RUACA103)
• 3 pieces of MaxxMacro MXRuler 23922 WEDM Stepped Support Tab (MM-RUACR203)
• 2 pieces of MaxxMacro MXRuler 23925 WEDM Standard 60mm Support Tab (MM-RUACR201)
• 3 pieces of MaxxMacro MXRuler 239241 WEDM Basic Toe Clamps (MM-RUACR205)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• GFAC Cut 300 CT 430/440-Dovetails Left/Right
  

MaxxMacro 239460 MXRuler Ruler 460mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. The rulers are available in various lengths (-XXX), to match different machines. The cross-section is matched to the length to ensure optimal stability.

MaxxDesign Exclusive Features:

• Fully rust-proof design with built-in height adjustment
• Compatible with any reference element (requires MaxxMacro A2391 WEDM 60mm Sliding Clamps when used)

Product Information:

The MaxxMacro MXRuler is the most versatile setup for your Wire EDM machine. It is available in various lengths (-XXX) to match different machine sizes, with each length paired with a specifically designed cross-section to ensure optimal stability and performance. The MXRuler is compatible with a wide range of accessories, allowing for quick and easy mounting of workpieces of various sizes and shapes.

The MaxxMacro MXRuler includes the following items:

• 1 MaxxMacro MXRuler
• 1 MaxxMacro Ruler Eccentric Endstop (MM-RUACR214)
• 2 pieces of MaxxMacro MXRuler A239 WEDM Clamps non-rail (MM-RUACA103)
• 2 pieces of MaxxMacro MXRuler 23922 WEDM Stepped Support Tab (MM-RUACR203)
• 2 pieces of MaxxMacro MXRuler 23925 WEDM Standard 60mm Support Tab (MM-RUACR201)
• 2 pieces of MaxxMacro MXRuler 239241 WEDM Basic Toe Clamps (MM-RUACR205)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• ONA AF25

MaxxMacro 239945 MXRuler Ruler 945mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. The rulers are available in various lengths (-XXX), to match different machines. The cross-section is matched to the length to ensure optimal stability.

MaxxDesign Exclusive Features:

• Enhanced rigidity with upgraded dimensions: 86 mm wide (up from 60 mm) and 36 mm high (up from 30 mm)
• Compatible with any reference element (requires MaxxMacro A2392 MXRuler WEDM Sliding 86mm Clamps)

Product Information:

The MaxxMacro MXRuler is the most versatile setup for your Wire EDM machine. It is available in various lengths (-XXX) to match different machine sizes, with each length paired with a specifically designed cross-section to ensure optimal stability and performance. The MXRuler is compatible with a wide range of accessories, allowing for quick and easy mounting of workpieces of various sizes and shapes.

The MaxxMacro MXRuler includes the following items:

• 1 MaxxMacro MXRuler
• 1 MaxxMacro Ruler Eccentric Endstop (MM-RUACR214)
• 2 pieces of MaxxMacro MXRuler A239 WEDM Clamps non-rail (MM-RUACA103)
• 3 pieces of MaxxMacro MXRuler 23922 WEDM Stepped Support Tab (MM-RUACR203)
• 2 pieces of MaxxMacro MXRuler 23925 WEDM Standard 60mm Support Tab (MM-RUACR201)
• 3 pieces of MaxxMacro MXRuler 239241 WEDM Basic Toe Clamps (MM-RUACR205)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Sodick AQ900L
  

MaxxMacro 2005J11 MXRuler WEDM Reference Element 498mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Reference elements for machines with zero-line table. The length (L), hole spacing (C) and hole edge spacing (B) of the hardened reference elements are matched to the machine in question.

MaxxDesign Exclusive Features:

• Designed for mounting the MXRuler, MaxxMacro Mounting Heads, and other compatible accessories for flexible Wire EDM setups.
• High-quality materials with a fully rust-proof design for long-lasting performance

Product Information:

The MaxxMacro MXRuler Reference Element is available in various lengths to match different Wire EDM machines, with custom sizes available upon request. Each unit includes 1 MaxxMacro MXRuler Reference Element and 1 Adjustable End-Stop to support repeatable setups. Designed with a precision dovetail profile, this component serves as a mounting base not only for the MXRuler but also for a wide range of compatible MaxxMacro Wire EDM accessories. It is also compatible with MaxxMacro Leveling Heads, unlocking extensive configuration possibilities with both MXRuler accessories and Mounting Head components.

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Sodick A500
  
• Sodick A600W
  

MaxxMacro 20039J12 MXRuler WEDM Reference Element 370mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Reference elements for machines with zero-line table. The length (L), hole spacing (C) and hole edge spacing (B) of the hardened reference elements are matched to the machine in question.

MaxxDesign Exclusive Features:

• Designed for mounting the MXRuler, MaxxMacro Mounting Heads, and other compatible accessories for flexible Wire EDM setups.
• High-quality materials with a fully rust-proof design for long-lasting performance

Product Information:

The MaxxMacro MXRuler Reference Element is available in various lengths to match different Wire EDM machines, with custom sizes available upon request. Each unit includes 1 MaxxMacro MXRuler Reference Element and 1 Adjustable End-Stop to support repeatable setups. Designed with a precision dovetail profile, this component serves as a mounting base not only for the MXRuler but also for a wide range of compatible MaxxMacro Wire EDM accessories. It is also compatible with MaxxMacro Leveling Heads, unlocking extensive configuration possibilities with both MXRuler accessories and Mounting Head components.

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Sodick A530
  
• Sodick A535
  
• Sodick AQ535
  
• Sodick AQ325L (yr. 2001-)
  
• Sodick AQ535L (yr. 2001-)
  

Vertical setup:

• Sodick AQ325L (yr. 2001-)
  
• Sodick AQ535L (yr. 2001-)
  

MaxxMacro 2003JSTD MXRuler WEDM Reference Element 345mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Reference elements for machines with zero-line table. The length (L), hole spacing (C) and hole edge spacing (B) of the hardened reference elements are matched to the machine in question.

MaxxDesign Exclusive Features:

• Designed for mounting the MXRuler, MaxxMacro Mounting Heads, and other compatible accessories for flexible Wire EDM setups.
• High-quality materials with a fully rust-proof design for long-lasting performance

Product Information:

The MaxxMacro MXRuler Reference Element is available in various lengths to match different Wire EDM machines, with custom sizes available upon request. Each unit includes 1 MaxxMacro MXRuler Reference Element and 1 Adjustable End-Stop to support repeatable setups. Designed with a precision dovetail profile, this component serves as a mounting base not only for the MXRuler but also for a wide range of compatible MaxxMacro Wire EDM accessories. It is also compatible with MaxxMacro Leveling Heads, unlocking extensive configuration possibilities with both MXRuler accessories and Mounting Head components.

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

MaxxMacro 2004J61 MXRuler WEDM Reference Element 445mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Reference elements for machines with zero-line table. The length (L), hole spacing (C) and hole edge spacing (B) of the hardened reference elements are matched to the machine in question.

MaxxDesign Exclusive Features:

• Designed for mounting the MXRuler, MaxxMacro Mounting Heads, and other compatible accessories for flexible Wire EDM setups.
• High-quality materials with a fully rust-proof design for long-lasting performance

Product Information:

The MaxxMacro MXRuler Reference Element is available in various lengths to match different Wire EDM machines, with custom sizes available upon request. Each unit includes 1 MaxxMacro MXRuler Reference Element and 1 Adjustable End-Stop to support repeatable setups. Designed with a precision dovetail profile, this component serves as a mounting base not only for the MXRuler but also for a wide range of compatible MaxxMacro Wire EDM accessories. It is also compatible with MaxxMacro Leveling Heads, unlocking extensive configuration possibilities with both MXRuler accessories and Mounting Head components.

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Seibu MM50B
  
• Seibu 1JMM50B
  

MaxxMacro 239420 MXRuler Ruler 420mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. The rulers are available in various lengths (-XXX), to match different machines. The cross-section is matched to the length to ensure optimal stability.

MaxxDesign Exclusive Features:

• Fully rust-proof design with built-in height adjustment
• Compatible with any reference element (requires MaxxMacro A2391 WEDM 60mm Sliding Clamps when used)

Product Information:

The MaxxMacro MXRuler is the most versatile setup for your Wire EDM machine. It is available in various lengths (-XXX) to match different machine sizes, with each length paired with a specifically designed cross-section to ensure optimal stability and performance. The MXRuler is compatible with a wide range of accessories, allowing for quick and easy mounting of workpieces of various sizes and shapes.

The MaxxMacro MXRuler includes the following items:

• 1 MaxxMacro MXRuler
• 1 MaxxMacro Ruler Eccentric Endstop (MM-RUACR214)
• 2 pieces of MaxxMacro MXRuler A239 WEDM Clamps non-rail (MM-RUACA103)
• 2 pieces of MaxxMacro MXRuler 23922 WEDM Stepped Support Tab (MM-RUACR203)
• 2 pieces of MaxxMacro MXRuler 23925 WEDM Standard 60mm Support Tab (MM-RUACR201)
• 2 pieces of MaxxMacro MXRuler 239241 WEDM Basic Toe Clamps (MM-RUACR205)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Vertical setup:

• Charmilles RoboFil 380
• Charmilles RoboFil 390
  

MaxxMacro 239875 MXRuler Ruler 875mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. The rulers are available in various lengths (-XXX), to match different machines. The cross-section is matched to the length to ensure optimal stability.

MaxxDesign Exclusive Features:

• Enhanced rigidity with upgraded dimensions: 86 mm wide (up from 60 mm) and 36 mm high (up from 30 mm)
• Compatible with any reference element (requires MaxxMacro A2392 MXRuler WEDM Sliding 86mm Clamps)

Product Information:

The MaxxMacro MXRuler is the most versatile setup for your Wire EDM machine. It is available in various lengths (-XXX) to match different machine sizes, with each length paired with a specifically designed cross-section to ensure optimal stability and performance. The MXRuler is compatible with a wide range of accessories, allowing for quick and easy mounting of workpieces of various sizes and shapes.

The MaxxMacro MXRuler includes the following items:

• 1 MaxxMacro MXRuler
• 1 MaxxMacro Ruler Eccentric Endstop (MM-RUACR214)
• 2 pieces of MaxxMacro MXRuler A239 WEDM Clamps non-rail (MM-RUACA103)
• 3 pieces of MaxxMacro MXRuler 23922 WEDM Stepped Support Tab (MM-RUACR203)
• 2 pieces of MaxxMacro MXRuler 23925 WEDM Standard 60mm Support Tab (MM-RUACR201)
• 3 pieces of MaxxMacro MXRuler 239241 WEDM Basic Toe Clamps (MM-RUACR205)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• AgieCharmilles Progress VP4
• Agie Progress 4
  
• ONA AF60
  
• ONA AV60
  
• ONA AX6
  

MaxxMacro 239820 MXRuler Ruler 820mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. The rulers are available in various lengths (-XXX), to match different machines. The cross-section is matched to the length to ensure optimal stability.

MaxxDesign Exclusive Features:

• Enhanced rigidity with upgraded dimensions: 86 mm wide (up from 60 mm) and 36 mm high (up from 30 mm)
• Compatible with any reference element (requires MaxxMacro A2392 MXRuler WEDM Sliding 86mm Clamps)

Product Information:

The MaxxMacro MXRuler is the most versatile setup for your Wire EDM machine. It is available in various lengths (-XXX) to match different machine sizes, with each length paired with a specifically designed cross-section to ensure optimal stability and performance. The MXRuler is compatible with a wide range of accessories, allowing for quick and easy mounting of workpieces of various sizes and shapes.

The MaxxMacro MXRuler includes the following items:

• 1 MaxxMacro MXRuler
• 1 MaxxMacro Ruler Eccentric Endstop (MM-RUACR214)
• 2 pieces of MaxxMacro MXRuler A239 WEDM Clamps non-rail (MM-RUACA103)
• 3 pieces of MaxxMacro MXRuler 23922 WEDM Stepped Support Tab (MM-RUACR203)
• 2 pieces of MaxxMacro MXRuler 23925 WEDM Standard 60mm Support Tab (MM-RUACR201)
• 3 pieces of MaxxMacro MXRuler 239241 WEDM Basic Toe Clamps (MM-RUACR205)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Charmilles RoboFil 500
  Charmilles RoboFil 504
  Charmilles RoboFil 510
  

MaxxMacro 239520 MXRuler Ruler 520mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. The rulers are available in various lengths (-XXX), to match different machines. The cross-section is matched to the length to ensure optimal stability.

MaxxDesign Exclusive Features:

• Fully rust-proof design with built-in height adjustment
• Compatible with any reference element (requires MaxxMacro A2391 WEDM 60mm Sliding Clamps when used)

Product Information:

The MaxxMacro MXRuler is the most versatile setup for your Wire EDM machine. It is available in various lengths (-XXX) to match different machine sizes, with each length paired with a specifically designed cross-section to ensure optimal stability and performance. The MXRuler is compatible with a wide range of accessories, allowing for quick and easy mounting of workpieces of various sizes and shapes.

The MaxxMacro MXRuler includes the following items:

• 1 MaxxMacro MXRuler
• 1 MaxxMacro Ruler Eccentric Endstop (MM-RUACR214)
• 2 pieces of MaxxMacro MXRuler A239 WEDM Clamps non-rail (MM-RUACA103)
• 2 pieces of MaxxMacro MXRuler 23922 WEDM Stepped Support Tab (MM-RUACR203)
• 2 pieces of MaxxMacro MXRuler 23925 WEDM Standard 60mm Support Tab (MM-RUACR201)
• 2 pieces of MaxxMacro MXRuler 239241 WEDM Basic Toe Clamps (MM-RUACR205)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Fanuc Alpha 1A
  
• Charmilles RoboFil 380
• Charmilles RoboFil 390
• Charmilles RoboFil 290
• Charmilles RoboFil 300
• Charmilles RoboFil 304
• Charmilles RoboFil 310
  

MaxxMacro 239730 MXRuler Ruler 730mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. The rulers are available in various lengths (-XXX), to match different machines. The cross-section is matched to the length to ensure optimal stability.

MaxxDesign Exclusive Features:

• Enhanced rigidity with upgraded dimensions: 86 mm wide (up from 60 mm) and 36 mm high (up from 30 mm)
• Compatible with any reference element (requires MaxxMacro A2392 MXRuler WEDM Sliding 86mm Clamps)

Product Information:

The MaxxMacro MXRuler is the most versatile setup for your Wire EDM machine. It is available in various lengths (-XXX) to match different machine sizes, with each length paired with a specifically designed cross-section to ensure optimal stability and performance. The MXRuler is compatible with a wide range of accessories, allowing for quick and easy mounting of workpieces of various sizes and shapes.

The MaxxMacro MXRuler includes the following items:

• 1 MaxxMacro MXRuler
• 1 MaxxMacro Ruler Eccentric Endstop (MM-RUACR214)
• 2 pieces of MaxxMacro MXRuler A239 WEDM Clamps non-rail (MM-RUACA103)
• 3 pieces of MaxxMacro MXRuler 23922 WEDM Stepped Support Tab (MM-RUACR203)
• 2 pieces of MaxxMacro MXRuler 23925 WEDM Standard 60mm Support Tab (MM-RUACR201)
• 3 pieces of MaxxMacro MXRuler 239241 WEDM Basic Toe Clamps (MM-RUACR205)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Vertical setup:

• Charmilles RoboFil 640
  
• Charmilles RoboFil 690
  
• Charmilles RoboFil 690cc
  

MaxxMacro 239915 MXRuler Ruler 915mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. The rulers are available in various lengths (-XXX), to match different machines. The cross-section is matched to the length to ensure optimal stability.

MaxxDesign Exclusive Features:

• Enhanced rigidity with upgraded dimensions: 86 mm wide (up from 60 mm) and 36 mm high (up from 30 mm)
• Compatible with any reference element (requires MaxxMacro A2392 MXRuler WEDM Sliding 86mm Clamps)

Product Information:

The MaxxMacro MXRuler is the most versatile setup for your Wire EDM machine. It is available in various lengths (-XXX) to match different machine sizes, with each length paired with a specifically designed cross-section to ensure optimal stability and performance. The MXRuler is compatible with a wide range of accessories, allowing for quick and easy mounting of workpieces of various sizes and shapes.

The MaxxMacro MXRuler includes the following items:

• 1 MaxxMacro MXRuler
• 1 MaxxMacro Ruler Eccentric Endstop (MM-RUACR214)
• 2 pieces of MaxxMacro MXRuler A239 WEDM Clamps non-rail (MM-RUACA103)
• 3 pieces of MaxxMacro MXRuler 23922 WEDM Stepped Support Tab (MM-RUACR203)
• 2 pieces of MaxxMacro MXRuler 23925 WEDM Standard 60mm Support Tab (MM-RUACR201)
• 3 pieces of MaxxMacro MXRuler 239241 WEDM Basic Toe Clamps (MM-RUACR205)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Charmilles RoboFil 690
  
• Charmilles RoboFil 690cc
  

Vertical setup:

• AgieCharmilles CUT P 1250
  

MaxxMacro 239805 MXRuler Ruler 805mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. The rulers are available in various lengths (-XXX), to match different machines. The cross-section is matched to the length to ensure optimal stability.

MaxxDesign Exclusive Features:

• Enhanced rigidity with upgraded dimensions: 86 mm wide (up from 60 mm) and 36 mm high (up from 30 mm)
• Compatible with any reference element (requires MaxxMacro A2392 MXRuler WEDM Sliding 86mm Clamps)

Product Information:

The MaxxMacro MXRuler is the most versatile setup for your Wire EDM machine. It is available in various lengths (-XXX) to match different machine sizes, with each length paired with a specifically designed cross-section to ensure optimal stability and performance. The MXRuler is compatible with a wide range of accessories, allowing for quick and easy mounting of workpieces of various sizes and shapes.

The MaxxMacro MXRuler includes the following items:

• 1 MaxxMacro MXRuler
• 1 MaxxMacro Ruler Eccentric Endstop (MM-RUACR214)
• 2 pieces of MaxxMacro MXRuler A239 WEDM Clamps non-rail (MM-RUACA103)
• 3 pieces of MaxxMacro MXRuler 23922 WEDM Stepped Support Tab (MM-RUACR203)
• 2 pieces of MaxxMacro MXRuler 23925 WEDM Standard 60mm Support Tab (MM-RUACR201)
• 3 pieces of MaxxMacro MXRuler 239241 WEDM Basic Toe Clamps (MM-RUACR205)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Chmer 743
  

MaxxMacro 2004JSTD MXRuler WEDM Reference Element 270mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Reference elements for machines with zero-line table. The length (L), hole spacing (C) and hole edge spacing (B) of the hardened reference elements are matched to the machine in question.

MaxxDesign Exclusive Features:

• Designed for mounting the MXRuler, MaxxMacro Mounting Heads, and other compatible accessories for flexible Wire EDM setups.
• High-quality materials with a fully rust-proof design for long-lasting performance

Product Information:

The MaxxMacro MXRuler Reference Element is available in various lengths to match different Wire EDM machines, with custom sizes available upon request. Each unit includes 1 MaxxMacro MXRuler Reference Element and 1 Adjustable End-Stop to support repeatable setups. Designed with a precision dovetail profile, this component serves as a mounting base not only for the MXRuler but also for a wide range of compatible MaxxMacro Wire EDM accessories. It is also compatible with MaxxMacro Leveling Heads, unlocking extensive configuration possibilities with both MXRuler accessories and Mounting Head components.

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• AgieCharmilles CUT 1000 (yr 2000-)
  

Vertical setup:

• AgieCharmilles CUT 1000 (yr 2000-)
  

MaxxMacro 239345 MXRuler Ruler 345mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. The rulers are available in various lengths (-XXX), to match different machines. The cross-section is matched to the length to ensure optimal stability.

MaxxDesign Exclusive Features:

• Fully rust-proof design with built-in height adjustment
• Compatible with any reference element (requires MaxxMacro A2391 WEDM 60mm Sliding Clamps when used)

Product Information:

The MaxxMacro MXRuler is the most versatile setup for your Wire EDM machine. It is available in various lengths (-XXX) to match different machine sizes, with each length paired with a specifically designed cross-section to ensure optimal stability and performance. The MXRuler is compatible with a wide range of accessories, allowing for quick and easy mounting of workpieces of various sizes and shapes.

The MaxxMacro MXRuler includes the following items:

• 1 MaxxMacro MXRuler
• 1 MaxxMacro Ruler Eccentric Endstop (MM-RUACR214)
• 2 pieces of MaxxMacro MXRuler A239 WEDM Clamps non-rail (MM-RUACA103)
• 2 pieces of MaxxMacro MXRuler 23922 WEDM Stepped Support Tab (MM-RUACR203)
• 2 pieces of MaxxMacro MXRuler 23925 WEDM Standard 60mm Support Tab (MM-RUACR201)
• 2 pieces of MaxxMacro MXRuler 239241 WEDM Basic Toe Clamps (MM-RUACR205)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Mitsubishi MX600
• Mitsubishi MX900
• Mitsubishi PA10
• Mitsubishi QA10
• Sodick AQ300
• Fanuc Alpha 0B
  

Vertical setup:

• Mitsubishi MX900
• Mitsubishi MP1200
• Mitsubishi MV1200R
• Mitsubishi MD Pro 3
  
• Makino DUO43
• Makino EU43
• Makino SP43
  

MaxxMacro 2005J2 MXRuler WEDM Reference Element 570mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Reference elements for machines with zero-line table. The length (L), hole spacing (C) and hole edge spacing (B) of the hardened reference elements are matched to the machine in question.

MaxxDesign Exclusive Features:

• Designed for mounting the MXRuler, MaxxMacro Mounting Heads, and other compatible accessories for flexible Wire EDM setups.
• High-quality materials with a fully rust-proof design for long-lasting performance

Product Information:

The MaxxMacro MXRuler Reference Element is available in various lengths to match different Wire EDM machines, with custom sizes available upon request. Each unit includes 1 MaxxMacro MXRuler Reference Element and 1 Adjustable End-Stop to support repeatable setups. Designed with a precision dovetail profile, this component serves as a mounting base not only for the MXRuler but also for a wide range of compatible MaxxMacro Wire EDM accessories. It is also compatible with MaxxMacro Leveling Heads, unlocking extensive configuration possibilities with both MXRuler accessories and Mounting Head components.

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Excetek V650G
  
• Excetek V850G
  
• Makino U1310
  
• Mitsubishi FA30-S Advance
  
• Mitsubishi BA24
  
• Mitsubishi NA24
  
• Mitsubishi NA2400
  
• Mitsubishi NA2400P
  
• Sodick AL800G
  
• Sodick AL800P
  
• Sodick ALC800G
  
• Sodick ALN800G
  
• Seibu 1175B
  

Vertical setup:

• AgieCharmilles CUT 3000 / S / X (yr 2011-)
  
• AgieCharmilles CUT X 500
  
• AgieCharmilles Progress VP3 (yr2014-2021)
  
• Excetek V400G
  
• Excetek V650G
  
• Fanuc alpha 1iD
  
• Fanuc alpha 1iDP
  
• Fanuc alpha 1iE
  
• Makino EU64
  
• Mitsubishi FA20-S Advance
  
• Mitsubishi SX2
  
• Mitsubishi SX20
  
• Sodick AQ1200L
  
• ONA AF35
  
• ONA AV35
  
• Seibu M35B
  
• Seibu MM50B
  
• Seibu 1JMM50B
  

MaxxMacro 239745 MXRuler Ruler 745mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. The rulers are available in various lengths (-XXX), to match different machines. The cross-section is matched to the length to ensure optimal stability.

MaxxDesign Exclusive Features:

• Enhanced rigidity with upgraded dimensions: 86 mm wide (up from 60 mm) and 36 mm high (up from 30 mm)
• Compatible with any reference element (requires MaxxMacro A2392 MXRuler WEDM Sliding 86mm Clamps)

Product Information:

The MaxxMacro MXRuler is the most versatile setup for your Wire EDM machine. It is available in various lengths (-XXX) to match different machine sizes, with each length paired with a specifically designed cross-section to ensure optimal stability and performance. The MXRuler is compatible with a wide range of accessories, allowing for quick and easy mounting of workpieces of various sizes and shapes.

The MaxxMacro MXRuler includes the following items:

• 1 MaxxMacro MXRuler
• 1 MaxxMacro Ruler Eccentric Endstop (MM-RUACR214)
• 2 pieces of MaxxMacro MXRuler A239 WEDM Clamps non-rail (MM-RUACA103)
• 3 pieces of MaxxMacro MXRuler 23922 WEDM Stepped Support Tab (MM-RUACR203)
• 2 pieces of MaxxMacro MXRuler 23925 WEDM Standard 60mm Support Tab (MM-RUACR201)
• 3 pieces of MaxxMacro MXRuler 239241 WEDM Basic Toe Clamps (MM-RUACR205)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Makino EU64
  

MaxxMacro 2005J71 MXRuler WEDM Reference Element 520mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Reference elements for machines with zero-line table. The length (L), hole spacing (C) and hole edge spacing (B) of the hardened reference elements are matched to the machine in question.

MaxxDesign Exclusive Features:

• Designed for mounting the MXRuler, MaxxMacro Mounting Heads, and other compatible accessories for flexible Wire EDM setups.
• High-quality materials with a fully rust-proof design for long-lasting performance

Product Information:

The MaxxMacro MXRuler Reference Element is available in various lengths to match different Wire EDM machines, with custom sizes available upon request. Each unit includes 1 MaxxMacro MXRuler Reference Element and 1 Adjustable End-Stop to support repeatable setups. Designed with a precision dovetail profile, this component serves as a mounting base not only for the MXRuler but also for a wide range of compatible MaxxMacro Wire EDM accessories. It is also compatible with MaxxMacro Leveling Heads, unlocking extensive configuration possibilities with both MXRuler accessories and Mounting Head components.

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Vertical setup:

• AgieCharmilles CUT 2000 / S / X (yr 2011-)
  
• AgieCharmilles CUT X 350
  
• AgieCharmilles Progress VP2 (yr2014-2021)
  

MaxxMacro 239715 MXRuler Ruler 715mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. The rulers are available in various lengths (-XXX), to match different machines. The cross-section is matched to the length to ensure optimal stability.

MaxxDesign Exclusive Features:

• Enhanced rigidity with upgraded dimensions: 86 mm wide (up from 60 mm) and 36 mm high (up from 30 mm)
• Compatible with any reference element (requires MaxxMacro A2392 MXRuler WEDM Sliding 86mm Clamps)

Product Information:

The MaxxMacro MXRuler is the most versatile setup for your Wire EDM machine. It is available in various lengths (-XXX) to match different machine sizes, with each length paired with a specifically designed cross-section to ensure optimal stability and performance. The MXRuler is compatible with a wide range of accessories, allowing for quick and easy mounting of workpieces of various sizes and shapes.

The MaxxMacro MXRuler includes the following items:

• 1 MaxxMacro MXRuler
• 1 MaxxMacro Ruler Eccentric Endstop (MM-RUACR214)
• 2 pieces of MaxxMacro MXRuler A239 WEDM Clamps non-rail (MM-RUACA103)
• 3 pieces of MaxxMacro MXRuler 23922 WEDM Stepped Support Tab (MM-RUACR203)
• 2 pieces of MaxxMacro MXRuler 23925 WEDM Standard 60mm Support Tab (MM-RUACR201)
• 3 pieces of MaxxMacro MXRuler 239241 WEDM Basic Toe Clamps (MM-RUACR205)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Makino SP64
  

MaxxMacro 2005JSTD MXRuler WEDM Reference Element 381mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Reference elements for machines with zero-line table. The length (L), hole spacing (C) and hole edge spacing (B) of the hardened reference elements are matched to the machine in question.

MaxxDesign Exclusive Features:

• Designed for mounting the MXRuler, MaxxMacro Mounting Heads, and other compatible accessories for flexible Wire EDM setups.
• High-quality materials with a fully rust-proof design for long-lasting performance

Product Information:

The MaxxMacro MXRuler Reference Element is available in various lengths to match different Wire EDM machines, with custom sizes available upon request. Each unit includes 1 MaxxMacro MXRuler Reference Element and 1 Adjustable End-Stop to support repeatable setups. Designed with a precision dovetail profile, this component serves as a mounting base not only for the MXRuler but also for a wide range of compatible MaxxMacro Wire EDM accessories. It is also compatible with MaxxMacro Leveling Heads, unlocking extensive configuration possibilities with both MXRuler accessories and Mounting Head components.

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• AgieCharmilles CUT 2000 / S / X (yr 2011-)
  
• AgieCharmilles CUT X 350
  
• Agie Attak
  
• Agie Celebration 2
  
• Agie Challenge 2
  
• Agie Classic 2
  
• Agie Evolution 2
• Agie Excellence 2
  
• Agie Progress 2
  
• AgieCharmilles Progress VP2 (yr2014-2021)
  

Vertical setup:

• Agie Attak
  
• Agie Celebration 2 (Square)
  
• Agie Challenge 2 (Square)
  
• Agie Classic 2 (Square)
  
• Agie Evolution 2 (Square)
  
• Agie Excellence 2 (Square)
  
• Agie Progress 2
  

MaxxMacro 239815 MXRuler Ruler 815mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. The rulers are available in various lengths (-XXX), to match different machines. The cross-section is matched to the length to ensure optimal stability.

MaxxDesign Exclusive Features:

• Enhanced rigidity with upgraded dimensions: 86 mm wide (up from 60 mm) and 36 mm high (up from 30 mm)
• Compatible with any reference element (requires MaxxMacro A2392 MXRuler WEDM Sliding 86mm Clamps)

Product Information:

The MaxxMacro MXRuler is the most versatile setup for your Wire EDM machine. It is available in various lengths (-XXX) to match different machine sizes, with each length paired with a specifically designed cross-section to ensure optimal stability and performance. The MXRuler is compatible with a wide range of accessories, allowing for quick and easy mounting of workpieces of various sizes and shapes.

The MaxxMacro MXRuler includes the following items:

• 1 MaxxMacro MXRuler
• 1 MaxxMacro Ruler Eccentric Endstop (MM-RUACR214)
• 2 pieces of MaxxMacro MXRuler A239 WEDM Clamps non-rail (MM-RUACA103)
• 3 pieces of MaxxMacro MXRuler 23922 WEDM Stepped Support Tab (MM-RUACR203)
• 2 pieces of MaxxMacro MXRuler 23925 WEDM Standard 60mm Support Tab (MM-RUACR201)
• 3 pieces of MaxxMacro MXRuler 239241 WEDM Basic Toe Clamps (MM-RUACR205)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Sodick A750
  

MaxxMacro 2006JSTD MXRuler WEDM Reference Element 490mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Reference elements for machines with zero-line table. The length (L), hole spacing (C) and hole edge spacing (B) of the hardened reference elements are matched to the machine in question.

MaxxDesign Exclusive Features:

• Designed for mounting the MXRuler, MaxxMacro Mounting Heads, and other compatible accessories for flexible Wire EDM setups.
• High-quality materials with a fully rust-proof design for long-lasting performance

Product Information:

The MaxxMacro MXRuler Reference Element is available in various lengths to match different Wire EDM machines, with custom sizes available upon request. Each unit includes 1 MaxxMacro MXRuler Reference Element and 1 Adjustable End-Stop to support repeatable setups. Designed with a precision dovetail profile, this component serves as a mounting base not only for the MXRuler but also for a wide range of compatible MaxxMacro Wire EDM accessories. It is also compatible with MaxxMacro Leveling Heads, unlocking extensive configuration possibilities with both MXRuler accessories and Mounting Head components.

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• AgieCharmilles CUT 3000 / S / X (yr 2011-)
  
• AgieCharmilles CUT X 500
  
• Agie Challenge 3
  
• Agie Classic 3
  
• Agie Evolution 3
  
• Agie Excellence 3
  
• Agie Progress 3
  
• AgieCharmilles Progress VP3 (yr2014-2021)
  

MaxxMacro 2007JSTD MXRuler WEDM Reference Element 570mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Reference elements for machines with zero-line table. The length (L), hole spacing (C) and hole edge spacing (B) of the hardened reference elements are matched to the machine in question.

MaxxDesign Exclusive Features:

• Designed for mounting the MXRuler, MaxxMacro Mounting Heads, and other compatible accessories for flexible Wire EDM setups.
• High-quality materials with a fully rust-proof design for long-lasting performance

Product Information:

The MaxxMacro MXRuler Reference Element is available in various lengths to match different Wire EDM machines, with custom sizes available upon request. Each unit includes 1 MaxxMacro MXRuler Reference Element and 1 Adjustable End-Stop to support repeatable setups. Designed with a precision dovetail profile, this component serves as a mounting base not only for the MXRuler but also for a wide range of compatible MaxxMacro Wire EDM accessories. It is also compatible with MaxxMacro Leveling Heads, unlocking extensive configuration possibilities with both MXRuler accessories and Mounting Head components.

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Agie Progress 4
  
• AgieCharmilles Progress VP4 (yr2014-2021)
  

Vertical setup:

• Agie Challenge 3 (Square)
  
• Agie Classic 3 (Square)
  
• Agie Evolution 3 (Square)
  
• Agie Excellence 3 (Square)
  
• Agie Progress 3
  

MaxxMacro 20039J2 MXRuler WEDM Reference Element 395mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Reference elements for machines with zero-line table. The length (L), hole spacing (C) and hole edge spacing (B) of the hardened reference elements are matched to the machine in question.

MaxxDesign Exclusive Features:

• Designed for mounting the MXRuler, MaxxMacro Mounting Heads, and other compatible accessories for flexible Wire EDM setups.
• High-quality materials with a fully rust-proof design for long-lasting performance

Product Information:

The MaxxMacro MXRuler Reference Element is available in various lengths to match different Wire EDM machines, with custom sizes available upon request. Each unit includes 1 MaxxMacro MXRuler Reference Element and 1 Adjustable End-Stop to support repeatable setups. Designed with a precision dovetail profile, this component serves as a mounting base not only for the MXRuler but also for a wide range of compatible MaxxMacro Wire EDM accessories. It is also compatible with MaxxMacro Leveling Heads, unlocking extensive configuration possibilities with both MXRuler accessories and Mounting Head components.

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Fanuc Alpha 1B
  
• Excetek V400G
  
• Mitsubishi FA10-S Advance
  
• Mitsubishi FA30
  
• Mitsubishi FX1
  
• Mitsubishi FX30
  
• Mitsubishi FX30K
  
• Mitsubishi PA10
  
• Mitsubishi MP1200
  
• Mitsubishi FA10 (U-shape)
  
• Mitsubishi FA10 SM (U-shape)
  
• Mitsubishi FX10 (U-shape)
  
• Mitsubishi FX10 K (U-shape)
  
• Mitsubishi MD Pro 3
  
• Mitsubishi MV1200R
• Mitsubishi MV4800R
  
• Mitsubishi MV4800S
  
• Sodick VZ500L
  

Vertical setup:

• Excetek V500G
  
• Fanuc alpha C800iB
  
• Mitsubishi FA30-S Advance
  
• Mitsubishi FA50-S Advance
  
• Mitsubishi MV4800R
  
• Mitsubishi MV4800S
  
• Mitsubishi FA10 (U-shape)
  
• Mitsubishi FA10 SM (U-shape)
  
• Mitsubishi FX10 (U-shape)
  
• Mitsubishi FX10 K (U-shape)
  
• Seibu M25LP
  

MaxxMacro 239795 MXRuler Ruler 795mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. The rulers are available in various lengths (-XXX), to match different machines. The cross-section is matched to the length to ensure optimal stability.

MaxxDesign Exclusive Features:

• Enhanced rigidity with upgraded dimensions: 86 mm wide (up from 60 mm) and 36 mm high (up from 30 mm)
• Compatible with any reference element (requires MaxxMacro A2392 MXRuler WEDM Sliding 86mm Clamps)

Product Information:

The MaxxMacro MXRuler is the most versatile setup for your Wire EDM machine. It is available in various lengths (-XXX) to match different machine sizes, with each length paired with a specifically designed cross-section to ensure optimal stability and performance. The MXRuler is compatible with a wide range of accessories, allowing for quick and easy mounting of workpieces of various sizes and shapes.

The MaxxMacro MXRuler includes the following items:

• 1 MaxxMacro MXRuler
• 1 MaxxMacro Ruler Eccentric Endstop (MM-RUACR214)
• 2 pieces of MaxxMacro MXRuler A239 WEDM Clamps non-rail (MM-RUACA103)
• 3 pieces of MaxxMacro MXRuler 23922 WEDM Stepped Support Tab (MM-RUACR203)
• 2 pieces of MaxxMacro MXRuler 23925 WEDM Standard 60mm Support Tab (MM-RUACR201)
• 3 pieces of MaxxMacro MXRuler 239241 WEDM Basic Toe Clamps (MM-RUACR205)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Mitsubishi FA30-S Advance
  
• Sodick AQ750L
  
• Seibu 1175B
  
• Seibu MM75B
  
• Seibu M75B
  

MaxxMacro 239845 MXRuler Ruler 845mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. The rulers are available in various lengths (-XXX), to match different machines. The cross-section is matched to the length to ensure optimal stability.

MaxxDesign Exclusive Features:

• Enhanced rigidity with upgraded dimensions: 86 mm wide (up from 60 mm) and 36 mm high (up from 30 mm)
• Compatible with any reference element (requires MaxxMacro A2392 MXRuler WEDM Sliding 86mm Clamps)

Product Information:

The MaxxMacro MXRuler is the most versatile setup for your Wire EDM machine. It is available in various lengths (-XXX) to match different machine sizes, with each length paired with a specifically designed cross-section to ensure optimal stability and performance. The MXRuler is compatible with a wide range of accessories, allowing for quick and easy mounting of workpieces of various sizes and shapes.

The MaxxMacro MXRuler includes the following items:

• 1 MaxxMacro MXRuler
• 1 MaxxMacro Ruler Eccentric Endstop (MM-RUACR214)
• 2 pieces of MaxxMacro MXRuler A239 WEDM Clamps non-rail (MM-RUACA103)
• 3 pieces of MaxxMacro MXRuler 23922 WEDM Stepped Support Tab (MM-RUACR203)
• 2 pieces of MaxxMacro MXRuler 23925 WEDM Standard 60mm Support Tab (MM-RUACR201)
• 3 pieces of MaxxMacro MXRuler 239241 WEDM Basic Toe Clamps (MM-RUACR205)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Excetek V850G
  
• Fanuc alpha C800iB
  
• Mitsubishi MV4800R
  
• Mitsubishi MV4800S
  
• Seibu MM80B
  

MaxxMacro 239865 MXRuler Ruler 865mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. The rulers are available in various lengths (-XXX), to match different machines. The cross-section is matched to the length to ensure optimal stability.

MaxxDesign Exclusive Features:

• Enhanced rigidity with upgraded dimensions: 86 mm wide (up from 60 mm) and 36 mm high (up from 30 mm)
• Compatible with any reference element (requires MaxxMacro A2392 MXRuler WEDM Sliding 86mm Clamps)

Product Information:

The MaxxMacro MXRuler is the most versatile setup for your Wire EDM machine. It is available in various lengths (-XXX) to match different machine sizes, with each length paired with a specifically designed cross-section to ensure optimal stability and performance. The MXRuler is compatible with a wide range of accessories, allowing for quick and easy mounting of workpieces of various sizes and shapes.

The MaxxMacro MXRuler includes the following items:

• 1 MaxxMacro MXRuler
• 1 MaxxMacro Ruler Eccentric Endstop (MM-RUACR214)
• 2 pieces of MaxxMacro MXRuler A239 WEDM Clamps non-rail (MM-RUACA103)
• 3 pieces of MaxxMacro MXRuler 23922 WEDM Stepped Support Tab (MM-RUACR203)
• 2 pieces of MaxxMacro MXRuler 23925 WEDM Standard 60mm Support Tab (MM-RUACR201)
• 3 pieces of MaxxMacro MXRuler 239241 WEDM Basic Toe Clamps (MM-RUACR205)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• AgieCharmilles CUT 400 (yr 2012)
  
• AgieCharmilles CUT 400 Sp
  
• AgieCharmilles CUT P 800
  
• AgieCharmilles CUT P 800 L Flushing
• Charmilles RoboFil 640
  
• Makino U86 (L-shape)
  
• ONA AE600
  

Vertical setup:

• Sodick AQ1200L
  

MaxxMacro 20029J2 MXRuler WEDM Reference Element 298mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Reference elements for machines with zero-line table. The length (L), hole spacing (C) and hole edge spacing (B) of the hardened reference elements are matched to the machine in question.

MaxxDesign Exclusive Features:

• Designed for mounting the MXRuler, MaxxMacro Mounting Heads, and other compatible accessories for flexible Wire EDM setups.
• High-quality materials with a fully rust-proof design for long-lasting performance

Product Information:

The MaxxMacro MXRuler Reference Element is available in various lengths to match different Wire EDM machines, with custom sizes available upon request. Each unit includes 1 MaxxMacro MXRuler Reference Element and 1 Adjustable End-Stop to support repeatable setups. Designed with a precision dovetail profile, this component serves as a mounting base not only for the MXRuler but also for a wide range of compatible MaxxMacro Wire EDM accessories. It is also compatible with MaxxMacro Leveling Heads, unlocking extensive configuration possibilities with both MXRuler accessories and Mounting Head components.

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Mitsubishi MX600
  
• Mitsubishi BA8
  
• Mitsubishi MD Pro 2
  
• Seibu MM80B
  

Vertical setup:

• Makino SP64 (yr 2005-)
  
• Sodick AP250L (W. 2002-)
  
• Sodick AP450L (W. 2002-)
  
• Sodick AQ360L
  

MaxxMacro 2003J2 MXRuler WEDM Reference Element 345mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Reference elements for machines with zero-line table. The length (L), hole spacing (C) and hole edge spacing (B) of the hardened reference elements are matched to the machine in question.

MaxxDesign Exclusive Features:

• Designed for mounting the MXRuler, MaxxMacro Mounting Heads, and other compatible accessories for flexible Wire EDM setups.
• High-quality materials with a fully rust-proof design for long-lasting performance

Product Information:

The MaxxMacro MXRuler Reference Element is available in various lengths to match different Wire EDM machines, with custom sizes available upon request. Each unit includes 1 MaxxMacro MXRuler Reference Element and 1 Adjustable End-Stop to support repeatable setups. Designed with a precision dovetail profile, this component serves as a mounting base not only for the MXRuler but also for a wide range of compatible MaxxMacro Wire EDM accessories. It is also compatible with MaxxMacro Leveling Heads, unlocking extensive configuration possibilities with both MXRuler accessories and Mounting Head components.

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• AgieCharmilles CUT 200 (yr 2012-)
  
• Charmilles RoboFiI 2050
  
• Fanuc alpha C800iB
  
• Mitsubishi MV1200S
  
• Mitsubishi MV4800R
  
• Mitsubishi MV4800S
  
• Mitsubishi MX900
  
• Mitsubishi NA12
  
• Mitsubishi NA1200
  
• Mitsubishi NA1200P
  
• Mitsubishi PA10
  
• Mitsubishi QA10
  
• Mitsubishi SX1
  
• Mitsubishi SX10
  
• ONA AE300
  
• ONA AX3
  

Vertical setup:

• AgieCharmilles CUT 30P (yr 2012-)
  
• AgieCharmilles CUT C 600
  
• AgieCharmilles CUT E 600
  
• Charmilles RoboFiI 2050
  
• Charmilles RoboFil 6040
  
• Charmilles RoboFil 6050
  
• Excetek V850G
  
• Fanuc alpha C600iA
  
• Fanuc alpha C600iB
  
• Fanuc alpha C600iC
  
• Mitsubishi MV2400S
  
• Mitsubishi MX600
  
• Mitsubishi MX900
  
• Mitsubishi BA24
  
• Mitsubishi NA24
  
• Mitsubishi NA2400
  
• Mitsubishi NA2400P
  
• Mitsubishi PA10
  
• Mitsubishi QA10
  
• Sodick VZ500L
  
• ONA AE400
  
• ONA AX4
  

MaxxMacro 239385 MXRuler Ruler 385mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. The rulers are available in various lengths (-XXX), to match different machines. The cross-section is matched to the length to ensure optimal stability.

MaxxDesign Exclusive Features:

• Fully rust-proof design with built-in height adjustment
• Compatible with any reference element (requires MaxxMacro A2391 WEDM 60mm Sliding Clamps when used)

Product Information:

The MaxxMacro MXRuler is the most versatile setup for your Wire EDM machine. It is available in various lengths (-XXX) to match different machine sizes, with each length paired with a specifically designed cross-section to ensure optimal stability and performance. The MXRuler is compatible with a wide range of accessories, allowing for quick and easy mounting of workpieces of various sizes and shapes.

The MaxxMacro MXRuler includes the following items:

• 1 MaxxMacro MXRuler
• 1 MaxxMacro Ruler Eccentric Endstop (MM-RUACR214)
• 2 pieces of MaxxMacro MXRuler A239 WEDM Clamps non-rail (MM-RUACA103)
• 2 pieces of MaxxMacro MXRuler 23922 WEDM Stepped Support Tab (MM-RUACR203)
• 2 pieces of MaxxMacro MXRuler 23925 WEDM Standard 60mm Support Tab (MM-RUACR201)
• 2 pieces of MaxxMacro MXRuler 239241 WEDM Basic Toe Clamps (MM-RUACR205)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Charmilles RoboFil 2050
• Charmilles 230/240 FI
  

MaxxMacro 2003J4 MXRuler WEDM Reference Element 345mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Reference elements for machines with zero-line table. The length (L), hole spacing (C) and hole edge spacing (B) of the hardened reference elements are matched to the machine in question.

MaxxDesign Exclusive Features:

• Designed for mounting the MXRuler, MaxxMacro Mounting Heads, and other compatible accessories for flexible Wire EDM setups.
• High-quality materials with a fully rust-proof design for long-lasting performance

Product Information:

The MaxxMacro MXRuler Reference Element is available in various lengths to match different Wire EDM machines, with custom sizes available upon request. Each unit includes 1 MaxxMacro MXRuler Reference Element and 1 Adjustable End-Stop to support repeatable setups. Designed with a precision dovetail profile, this component serves as a mounting base not only for the MXRuler but also for a wide range of compatible MaxxMacro Wire EDM accessories. It is also compatible with MaxxMacro Leveling Heads, unlocking extensive configuration possibilities with both MXRuler accessories and Mounting Head components.

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Makino U86 (L-shape)
  
• ONA AF60
  
• ONA AV60
  
• ONA AX6
  
• Chmer 432S
  

Vertical setup:

• Makino PX36
  
• Makino UP6
  
• ONA AF60
  
• ONA AV60
  
• ONA AX6
  

MaxxMacro 239435 MXRuler Ruler 435mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. The rulers are available in various lengths (-XXX), to match different machines. The cross-section is matched to the length to ensure optimal stability.

MaxxDesign Exclusive Features:

• Fully rust-proof design with built-in height adjustment
• Compatible with any reference element (requires MaxxMacro A2391 WEDM 60mm Sliding Clamps when used)

Product Information:

The MaxxMacro MXRuler is the most versatile setup for your Wire EDM machine. It is available in various lengths (-XXX) to match different machine sizes, with each length paired with a specifically designed cross-section to ensure optimal stability and performance. The MXRuler is compatible with a wide range of accessories, allowing for quick and easy mounting of workpieces of various sizes and shapes.

The MaxxMacro MXRuler includes the following items:

• 1 MaxxMacro MXRuler
• 1 MaxxMacro Ruler Eccentric Endstop (MM-RUACR214)
• 2 pieces of MaxxMacro MXRuler A239 WEDM Clamps non-rail (MM-RUACA103)
• 2 pieces of MaxxMacro MXRuler 23922 WEDM Stepped Support Tab (MM-RUACR203)
• 2 pieces of MaxxMacro MXRuler 23925 WEDM Standard 60mm Support Tab (MM-RUACR201)
• 2 pieces of MaxxMacro MXRuler 239241 WEDM Basic Toe Clamps (MM-RUACR205)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• AgieCharmilles CUT 200 (yr 2012-)
  

Vertical setup:

• AgieCharmilles CUT 3000 / S / X (yr 2011-)
• AgieCharmilles CUT X 500
• AgieCharmilles Progress VP3 (yr2014-2021)
  

MaxxMacro 20044J1 MXRuler WEDM Reference Element 445mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Reference elements for machines with zero-line table. The length (L), hole spacing (C) and hole edge spacing (B) of the hardened reference elements are matched to the machine in question.

MaxxDesign Exclusive Features:

• Designed for mounting the MXRuler, MaxxMacro Mounting Heads, and other compatible accessories for flexible Wire EDM setups.
• High-quality materials with a fully rust-proof design for long-lasting performance

Product Information:

The MaxxMacro MXRuler Reference Element is available in various lengths to match different Wire EDM machines, with custom sizes available upon request. Each unit includes 1 MaxxMacro MXRuler Reference Element and 1 Adjustable End-Stop to support repeatable setups. Designed with a precision dovetail profile, this component serves as a mounting base not only for the MXRuler but also for a wide range of compatible MaxxMacro Wire EDM accessories. It is also compatible with MaxxMacro Leveling Heads, unlocking extensive configuration possibilities with both MXRuler accessories and Mounting Head components.

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Accutex AU 600
• AgieCharmilles CUT 300 (yr 2012-)
  
• AgieCharmilles CUT 300 mS / Sp
  
• AgieCharmilles CUT P 550
  
• Charmilles RoboFil 380
  
• Charmilles RoboFil 390
  
• Charmilles RoboFil 430
  
• Charmilles RoboFil 440
  
• Makino U3 H.E.A.T. (Square)
  
• Makino U3 (U-shape)
  
• Makino U3i (Square)
  
• Makino U32j
  
• Makino UP32j
  
• Makino UPV-3
  
• Makino W32FB
  
• Makino U32
  
• Makino U32i
  
• Makino WB32B
  
• ONA AF25
  
• ONA AV35
  
• ONA AD35

Vertical setup:

• Charmilles RoboFiI 380
  
• Charmilles RoboFil 390
  
• Makino SP43 (US, yr 2005-)
  
• ONA AF25
  
• Seibu 1175B
  
• Seibu MM35B
  
• Seibu MM75B
  
• Seibu MM80B
  

MaxxMacro 239455 MXRuler Ruler 455mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. The rulers are available in various lengths (-XXX), to match different machines. The cross-section is matched to the length to ensure optimal stability.

MaxxDesign Exclusive Features:

• Fully rust-proof design with built-in height adjustment
• Compatible with any reference element (requires MaxxMacro A2391 WEDM 60mm Sliding Clamps when used)

Product Information:

The MaxxMacro MXRuler is the most versatile setup for your Wire EDM machine. It is available in various lengths (-XXX) to match different machine sizes, with each length paired with a specifically designed cross-section to ensure optimal stability and performance. The MXRuler is compatible with a wide range of accessories, allowing for quick and easy mounting of workpieces of various sizes and shapes.

The MaxxMacro MXRuler includes the following items:

• 1 MaxxMacro MXRuler
• 1 MaxxMacro Ruler Eccentric Endstop (MM-RUACR214)
• 2 pieces of MaxxMacro MXRuler A239 WEDM Clamps non-rail (MM-RUACA103)
• 2 pieces of MaxxMacro MXRuler 23922 WEDM Stepped Support Tab (MM-RUACR203)
• 2 pieces of MaxxMacro MXRuler 23925 WEDM Standard 60mm Support Tab (MM-RUACR201)
• 2 pieces of MaxxMacro MXRuler 239241 WEDM Basic Toe Clamps (MM-RUACR205)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• ONA AE300
• ONA AX3
• Chmer 432S

Vertical setup:

• ONA AV35
  

MaxxMacro 20049J1 MXRuler WEDM Reference Element 495mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Reference elements for machines with zero-line table. The length (L), hole spacing (C) and hole edge spacing (B) of the hardened reference elements are matched to the machine in question.

MaxxDesign Exclusive Features:

• Designed for mounting the MXRuler, MaxxMacro Mounting Heads, and other compatible accessories for flexible Wire EDM setups.
• High-quality materials with a fully rust-proof design for long-lasting performance

Product Information:

The MaxxMacro MXRuler Reference Element is available in various lengths to match different Wire EDM machines, with custom sizes available upon request. Each unit includes 1 MaxxMacro MXRuler Reference Element and 1 Adjustable End-Stop to support repeatable setups. Designed with a precision dovetail profile, this component serves as a mounting base not only for the MXRuler but also for a wide range of compatible MaxxMacro Wire EDM accessories. It is also compatible with MaxxMacro Leveling Heads, unlocking extensive configuration possibilities with both MXRuler accessories and Mounting Head components.

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Excetek V1060
  
• Makino PX36
  
• Makino UP6
  
• Makino DUO43
• Makino DUO64
  
• Makino SP64
  
• Sodick 7632
• Sodick AQ900L
  
• Sodick AQ600
  
• Seibu M50B
  
• Seibu MM75B
• Chmer 643S
  

Vertical setup:

• Excetek V1060
  
• Makino DUO43
  
• Sodick 7632
  
• Sodick AQ900L
  
• Seibu M50B
  

MaxxMacro 239495 MXRuler Ruler 495mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. The rulers are available in various lengths (-XXX), to match different machines. The cross-section is matched to the length to ensure optimal stability.

MaxxDesign Exclusive Features:

• Fully rust-proof design with built-in height adjustment
• Compatible with any reference element (requires MaxxMacro A2391 WEDM 60mm Sliding Clamps when used)

Product Information:

The MaxxMacro MXRuler is the most versatile setup for your Wire EDM machine. It is available in various lengths (-XXX) to match different machine sizes, with each length paired with a specifically designed cross-section to ensure optimal stability and performance. The MXRuler is compatible with a wide range of accessories, allowing for quick and easy mounting of workpieces of various sizes and shapes.

The MaxxMacro MXRuler includes the following items:

• 1 MaxxMacro MXRuler
• 1 MaxxMacro Ruler Eccentric Endstop (MM-RUACR214)
• 2 pieces of MaxxMacro MXRuler A239 WEDM Clamps non-rail (MM-RUACA103)
• 2 pieces of MaxxMacro MXRuler 23922 WEDM Stepped Support Tab (MM-RUACR203)
• 2 pieces of MaxxMacro MXRuler 23925 WEDM Standard 60mm Support Tab (MM-RUACR201)
• 2 pieces of MaxxMacro MXRuler 239241 WEDM Basic Toe Clamps (MM-RUACR205)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Fanuc Alpha 1B
  
• Makino DUO43
  
• Sodick AP450L (W. 2002-)
• Sodick AP450L (yr. 2001-)
  

Vertical setup:

• AgieCharmilles CUT 30P (yr 2012-)
• AgieCharmilles CUT C 600
• AgieCharmilles CUT E 600
  
• Makino U6 H.E.A.T. (Square)
• Makino U6i (Square)
  

MaxxMacro 2004J4 MXRuler WEDM Reference Element 445mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Reference elements for machines with zero-line table. The length (L), hole spacing (C) and hole edge spacing (B) of the hardened reference elements are matched to the machine in question.

MaxxDesign Exclusive Features:

• Designed for mounting the MXRuler, MaxxMacro Mounting Heads, and other compatible accessories for flexible Wire EDM setups.
• High-quality materials with a fully rust-proof design for long-lasting performance

Product Information:

The MaxxMacro MXRuler Reference Element is available in various lengths to match different Wire EDM machines, with custom sizes available upon request. Each unit includes 1 MaxxMacro MXRuler Reference Element and 1 Adjustable End-Stop to support repeatable setups. Designed with a precision dovetail profile, this component serves as a mounting base not only for the MXRuler but also for a wide range of compatible MaxxMacro Wire EDM accessories. It is also compatible with MaxxMacro Leveling Heads, unlocking extensive configuration possibilities with both MXRuler accessories and Mounting Head components.

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• AgieCharmilles CUT 30P (yr 2012-)
  
• Chmer 743
  

Vertical setup:

• ONA AE300
  
• ONA AX3
  

MaxxMacro 239515 MXRuler Ruler 515mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. The rulers are available in various lengths (-XXX), to match different machines. The cross-section is matched to the length to ensure optimal stability.

MaxxDesign Exclusive Features:

• Fully rust-proof design with built-in height adjustment
• Compatible with any reference element (requires MaxxMacro A2391 WEDM 60mm Sliding Clamps when used)

Product Information:

The MaxxMacro MXRuler is the most versatile setup for your Wire EDM machine. It is available in various lengths (-XXX) to match different machine sizes, with each length paired with a specifically designed cross-section to ensure optimal stability and performance. The MXRuler is compatible with a wide range of accessories, allowing for quick and easy mounting of workpieces of various sizes and shapes.

The MaxxMacro MXRuler includes the following items:

• 1 MaxxMacro MXRuler
• 1 MaxxMacro Ruler Eccentric Endstop (MM-RUACR214)
• 2 pieces of MaxxMacro MXRuler A239 WEDM Clamps non-rail (MM-RUACA103)
• 2 pieces of MaxxMacro MXRuler 23922 WEDM Stepped Support Tab (MM-RUACR203)
• 2 pieces of MaxxMacro MXRuler 23925 WEDM Standard 60mm Support Tab (MM-RUACR201)
• 2 pieces of MaxxMacro MXRuler 239241 WEDM Basic Toe Clamps (MM-RUACR205)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Makino EU43
• Makino SP43
  
• Makino U32j (Square)
  

MaxxMacro 239545 MXRuler Ruler 545mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. The rulers are available in various lengths (-XXX), to match different machines. The cross-section is matched to the length to ensure optimal stability.

MaxxDesign Exclusive Features:

• Enhanced rigidity with upgraded dimensions: 86 mm wide (up from 60 mm) and 36 mm high (up from 30 mm)
• Compatible with any reference element (requires MaxxMacro A2392 MXRuler WEDM Sliding 86mm Clamps)

Product Information:

The MaxxMacro MXRuler is the most versatile setup for your Wire EDM machine. It is available in various lengths (-XXX) to match different machine sizes, with each length paired with a specifically designed cross-section to ensure optimal stability and performance. The MXRuler is compatible with a wide range of accessories, allowing for quick and easy mounting of workpieces of various sizes and shapes.

The MaxxMacro MXRuler includes the following items:

• 1 MaxxMacro MXRuler
• 1 MaxxMacro Ruler Eccentric Endstop (MM-RUACR214)
• 2 pieces of MaxxMacro MXRuler A239 WEDM Clamps non-rail (MM-RUACA103)
• 3 pieces of MaxxMacro MXRuler 23922 WEDM Stepped Support Tab (MM-RUACR203)
• 2 pieces of MaxxMacro MXRuler 23925 WEDM Standard 60mm Support Tab (MM-RUACR201)
• 3 pieces of MaxxMacro MXRuler 239241 WEDM Basic Toe Clamps (MM-RUACR205)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Excetek V500G
  
• Mitsubishi FA20-S Advance
  
• Mitsubishi FA20
  
• Mitsubishi FA20SM (old ver.)
  
• Mitsubishi FX20 (old ver.)
  
• Mitsubishi PA20
  
• Mitsubishi QA20
  
• Mitsubishi SX2
  
• Mitsubishi SX20
  
• Mitsubishi FA30
  
• Mitsubishi FX30
  
• Mitsubishi FX30K
  
• Seibu M50B
  
• Seibu MM50B
  
• Seibu 1JMM50B
  

Vertical setup:

• Mitsubishi FA30-S Advance
  
• Seibu MM75B
  

MaxxMacro 239565 MXRuler Ruler 565mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. The rulers are available in various lengths (-XXX), to match different machines. The cross-section is matched to the length to ensure optimal stability.

MaxxDesign Exclusive Features:

• Enhanced rigidity with upgraded dimensions: 86 mm wide (up from 60 mm) and 36 mm high (up from 30 mm)
• Compatible with any reference element (requires MaxxMacro A2392 MXRuler WEDM Sliding 86mm Clamps)

Product Information:

The MaxxMacro MXRuler is the most versatile setup for your Wire EDM machine. It is available in various lengths (-XXX) to match different machine sizes, with each length paired with a specifically designed cross-section to ensure optimal stability and performance. The MXRuler is compatible with a wide range of accessories, allowing for quick and easy mounting of workpieces of various sizes and shapes.

The MaxxMacro MXRuler includes the following items:

• 1 MaxxMacro MXRuler
• 1 MaxxMacro Ruler Eccentric Endstop (MM-RUACR214)
• 2 pieces of MaxxMacro MXRuler A239 WEDM Clamps non-rail (MM-RUACA103)
• 3 pieces of MaxxMacro MXRuler 23922 WEDM Stepped Support Tab (MM-RUACR203)
• 2 pieces of MaxxMacro MXRuler 23925 WEDM Standard 60mm Support Tab (MM-RUACR201)
• 3 pieces of MaxxMacro MXRuler 239241 WEDM Basic Toe Clamps (MM-RUACR205)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Fanuc alpha 1iA
  
• Fanuc Alpha 1C
  
• Sodick A500
  
• Sodick A530
• Sodick VZ500L
  
• Makino U53
  
• Makino U53i
  

MaxxMacro 239595 MXRuler Ruler 595mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. The rulers are available in various lengths (-XXX), to match different machines. The cross-section is matched to the length to ensure optimal stability.

MaxxDesign Exclusive Features:

• Enhanced rigidity with upgraded dimensions: 86 mm wide (up from 60 mm) and 36 mm high (up from 30 mm)
• Compatible with any reference element (requires MaxxMacro A2392 MXRuler WEDM Sliding 86mm Clamps)

Product Information:

The MaxxMacro MXRuler is the most versatile setup for your Wire EDM machine. It is available in various lengths (-XXX) to match different machine sizes, with each length paired with a specifically designed cross-section to ensure optimal stability and performance. The MXRuler is compatible with a wide range of accessories, allowing for quick and easy mounting of workpieces of various sizes and shapes.

The MaxxMacro MXRuler includes the following items:

• 1 MaxxMacro MXRuler
• 1 MaxxMacro Ruler Eccentric Endstop (MM-RUACR214)
• 2 pieces of MaxxMacro MXRuler A239 WEDM Clamps non-rail (MM-RUACA103)
• 3 pieces of MaxxMacro MXRuler 23922 WEDM Stepped Support Tab (MM-RUACR203)
• 2 pieces of MaxxMacro MXRuler 23925 WEDM Standard 60mm Support Tab (MM-RUACR201)
• 3 pieces of MaxxMacro MXRuler 239241 WEDM Basic Toe Clamps (MM-RUACR205)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Fanuc alpha 1iB
  
• Fanuc alpha 1iC
  
• Makino U53j
  
• Makino U53Tj
  
• Makino UP53j
  
• Makino UPV-5
  
• Makino W53FB
  
• Makino WB53B
  
• Sodick AQ535L (yr. 2001-)
  
• Sodick AQ535
• Sodick AQ550
  

MaxxMacro 239615 MXRuler Ruler 615mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. The rulers are available in various lengths (-XXX), to match different machines. The cross-section is matched to the length to ensure optimal stability.

MaxxDesign Exclusive Features:

• Enhanced rigidity with upgraded dimensions: 86 mm wide (up from 60 mm) and 36 mm high (up from 30 mm)
• Compatible with any reference element (requires MaxxMacro A2392 MXRuler WEDM Sliding 86mm Clamps)

Product Information:

The MaxxMacro MXRuler is the most versatile setup for your Wire EDM machine. It is available in various lengths (-XXX) to match different machine sizes, with each length paired with a specifically designed cross-section to ensure optimal stability and performance. The MXRuler is compatible with a wide range of accessories, allowing for quick and easy mounting of workpieces of various sizes and shapes.

The MaxxMacro MXRuler includes the following items:

• 1 MaxxMacro MXRuler
• 1 MaxxMacro Ruler Eccentric Endstop (MM-RUACR214)
• 2 pieces of MaxxMacro MXRuler A239 WEDM Clamps non-rail (MM-RUACA103)
• 3 pieces of MaxxMacro MXRuler 23922 WEDM Stepped Support Tab (MM-RUACR203)
• 2 pieces of MaxxMacro MXRuler 23925 WEDM Standard 60mm Support Tab (MM-RUACR201)
• 3 pieces of MaxxMacro MXRuler 239241 WEDM Basic Toe Clamps (MM-RUACR205)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• AgieCharmilles CUT 300 (yr 2012-)
  
• AgieCharmilles CUT 300 mS / Sp
  
• AgieCharmilles CUT P 550
  
• Charmilles RoboFil 430
  
• Charmilles RoboFil 440
  
• Sodick AQ537L
  
• Sodick A535
  
• Sodick AQ535
  

Vertical setup:

• AgieCharmilles CUT 400 (yr 2012-)
  
• AgieCharmilles CUT 400 Sp
  
• AgieCharmilles CUT P 800
  
• AgieCharmilles CUT P 800 L Flushing
  

MaxxMacro 239665 MXRuler Ruler 665mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. The rulers are available in various lengths (-XXX), to match different machines. The cross-section is matched to the length to ensure optimal stability.

MaxxDesign Exclusive Features:

• Enhanced rigidity with upgraded dimensions: 86 mm wide (up from 60 mm) and 36 mm high (up from 30 mm)
• Compatible with any reference element (requires MaxxMacro A2392 MXRuler WEDM Sliding 86mm Clamps)

Product Information:

The MaxxMacro MXRuler is the most versatile setup for your Wire EDM machine. It is available in various lengths (-XXX) to match different machine sizes, with each length paired with a specifically designed cross-section to ensure optimal stability and performance. The MXRuler is compatible with a wide range of accessories, allowing for quick and easy mounting of workpieces of various sizes and shapes.

The MaxxMacro MXRuler includes the following items:

• 1 MaxxMacro MXRuler
• 1 MaxxMacro Ruler Eccentric Endstop (MM-RUACR214)
• 2 pieces of MaxxMacro MXRuler A239 WEDM Clamps non-rail (MM-RUACA103)
• 3 pieces of MaxxMacro MXRuler 23922 WEDM Stepped Support Tab (MM-RUACR203)
• 2 pieces of MaxxMacro MXRuler 23925 WEDM Standard 60mm Support Tab (MM-RUACR201)
• 3 pieces of MaxxMacro MXRuler 239241 WEDM Basic Toe Clamps (MM-RUACR205)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• ONA AV35
  
• Sodick A600W
  
• Chmer 643S
  

Vertical setup:

• ONA AE600
  

MaxxMacro 239675 MXRuler Ruler 675mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. The rulers are available in various lengths (-XXX), to match different machines. The cross-section is matched to the length to ensure optimal stability.

MaxxDesign Exclusive Features:

• Enhanced rigidity with upgraded dimensions: 86 mm wide (up from 60 mm) and 36 mm high (up from 30 mm)
• Compatible with any reference element (requires MaxxMacro A2392 MXRuler WEDM Sliding 86mm Clamps)

Product Information:

The MaxxMacro MXRuler is the most versatile setup for your Wire EDM machine. It is available in various lengths (-XXX) to match different machine sizes, with each length paired with a specifically designed cross-section to ensure optimal stability and performance. The MXRuler is compatible with a wide range of accessories, allowing for quick and easy mounting of workpieces of various sizes and shapes.

The MaxxMacro MXRuler includes the following items:

• 1 MaxxMacro MXRuler
• 1 MaxxMacro Ruler Eccentric Endstop (MM-RUACR214)
• 2 pieces of MaxxMacro MXRuler A239 WEDM Clamps non-rail (MM-RUACA103)
• 3 pieces of MaxxMacro MXRuler 23922 WEDM Stepped Support Tab (MM-RUACR203)
• 2 pieces of MaxxMacro MXRuler 23925 WEDM Standard 60mm Support Tab (MM-RUACR201)
• 3 pieces of MaxxMacro MXRuler 239241 WEDM Basic Toe Clamps (MM-RUACR205)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• AgieCharmilles CUT 30P (yr 2012-)
  
• AgieCharmilles CUT C 600
  
• AgieCharmilles CUT E 600
  
• ONA AF35
  
• ONA AE400
  
• ONA AX4
  

MaxxMacro 239275 MXRuler Ruler 275mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. The rulers are available in various lengths (-XXX), to match different machines. The cross-section is matched to the length to ensure optimal stability.

MaxxDesign Exclusive Features:

• Fully rust-proof design with built-in height adjustment
• Compatible with any reference element (requires MaxxMacro A2391 WEDM 60mm Sliding Clamps when used)

Product Information:

The MaxxMacro MXRuler is the most versatile setup for your Wire EDM machine. It is available in various lengths (-XXX) to match different machine sizes, with each length paired with a specifically designed cross-section to ensure optimal stability and performance. The MXRuler is compatible with a wide range of accessories, allowing for quick and easy mounting of workpieces of various sizes and shapes.

The MaxxMacro MXRuler includes the following items:

• 1 MaxxMacro MXRuler
• 1 MaxxMacro Ruler Eccentric Endstop (MM-RUACR214)
• 2 pieces of MaxxMacro MXRuler A239 WEDM Clamps non-rail (MM-RUACA103)
• 2 pieces of MaxxMacro MXRuler 23922 WEDM Stepped Support Tab (MM-RUACR203)
• 2 pieces of MaxxMacro MXRuler 23925 WEDM Standard 60mm Support Tab (MM-RUACR201)
• 2 pieces of MaxxMacro MXRuler 239241 WEDM Basic Toe Clamps (MM-RUACR205)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• AgieCharmilles CUT 1000 (yr 2000-)
  

MaxxMacro 239425 MXRuler Ruler 425mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. The rulers are available in various lengths (-XXX), to match different machines. The cross-section is matched to the length to ensure optimal stability.

MaxxDesign Exclusive Features:

• Fully rust-proof design with built-in height adjustment
• Compatible with any reference element (requires MaxxMacro A2391 WEDM 60mm Sliding Clamps when used)

Product Information:

The MaxxMacro MXRuler is the most versatile setup for your Wire EDM machine. It is available in various lengths (-XXX) to match different machine sizes, with each length paired with a specifically designed cross-section to ensure optimal stability and performance. The MXRuler is compatible with a wide range of accessories, allowing for quick and easy mounting of workpieces of various sizes and shapes.

The MaxxMacro MXRuler includes the following items:

• 1 MaxxMacro MXRuler
• 1 MaxxMacro Ruler Eccentric Endstop (MM-RUACR214)
• 2 pieces of MaxxMacro MXRuler A239 WEDM Clamps non-rail (MM-RUACA103)
• 2 pieces of MaxxMacro MXRuler 23922 WEDM Stepped Support Tab (MM-RUACR203)
• 2 pieces of MaxxMacro MXRuler 23925 WEDM Standard 60mm Support Tab (MM-RUACR201)
• 2 pieces of MaxxMacro MXRuler 239241 WEDM Basic Toe Clamps (MM-RUACR205)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Fanuc alpha C400iA
  
• Makino U3 H.E.A.T. (Square)
  
• Makino U3 (U-shape)
  
• Agie Attak
• Agie Celebration 2
• Agie Challenge 2
• Agie Classic 2
• Agie Evolution 2
• Agie Excellence 2
• Agie Progress 2
• AgieCharmilles CUT 2000 / S / X (yr 2011-)
• AgieCharmilles CUT X 350
• AgieCharmilles Progress VP2 (yr2014-2021)

Vertical setup:

• Agie Challenge 3 (Square)
• Agie Classic 3 (Square)
• Agie Evolution 3 (Square)
• Agie Excellence 3 (Square)
• Agie Progress 3
  

MaxxMacro 2002J2 MXRuler WEDM Reference Element 209mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Reference elements for machines with zero-line table. The length (L), hole spacing (C) and hole edge spacing (B) of the hardened reference elements are matched to the machine in question.

MaxxDesign Exclusive Features:

• Designed for mounting the MXRuler, MaxxMacro Mounting Heads, and other compatible accessories for flexible Wire EDM setups.
• High-quality materials with a fully rust-proof design for long-lasting performance

Product Information:

The MaxxMacro MXRuler Reference Element is available in various lengths to match different Wire EDM machines, with custom sizes available upon request. Each unit includes 1 MaxxMacro MXRuler Reference Element and 1 Adjustable End-Stop to support repeatable setups. Designed with a precision dovetail profile, this component serves as a mounting base not only for the MXRuler but also for a wide range of compatible MaxxMacro Wire EDM accessories. It is also compatible with MaxxMacro Leveling Heads, unlocking extensive configuration possibilities with both MXRuler accessories and Mounting Head components.

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Fanuc alpha 0iB
  

Vertical setup:

• Fanuc alpha 1iA
  
• Fanuc alpha 1iB
  
• Fanuc alpha 1iC
  

MaxxMacro 239605 MXRuler Ruler 605mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. The rulers are available in various lengths (-XXX), to match different machines. The cross-section is matched to the length to ensure optimal stability.

MaxxDesign Exclusive Features:

• Enhanced rigidity with upgraded dimensions: 86 mm wide (up from 60 mm) and 36 mm high (up from 30 mm)
• Compatible with any reference element (requires MaxxMacro A2392 MXRuler WEDM Sliding 86mm Clamps)

Product Information:

The MaxxMacro MXRuler is the most versatile setup for your Wire EDM machine. It is available in various lengths (-XXX) to match different machine sizes, with each length paired with a specifically designed cross-section to ensure optimal stability and performance. The MXRuler is compatible with a wide range of accessories, allowing for quick and easy mounting of workpieces of various sizes and shapes.

The MaxxMacro MXRuler includes the following items:

• 1 MaxxMacro MXRuler
• 1 MaxxMacro Ruler Eccentric Endstop (MM-RUACR214)
• 2 pieces of MaxxMacro MXRuler A239 WEDM Clamps non-rail (MM-RUACA103)
• 3 pieces of MaxxMacro MXRuler 23922 WEDM Stepped Support Tab (MM-RUACR203)
• 2 pieces of MaxxMacro MXRuler 23925 WEDM Standard 60mm Support Tab (MM-RUACR201)
• 3 pieces of MaxxMacro MXRuler 239241 WEDM Basic Toe Clamps (MM-RUACR205)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Sodick AQ560L
  
• Accutex 500I
  

MaxxMacro 239445 MXRuler Ruler 445mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. The rulers are available in various lengths (-XXX), to match different machines. The cross-section is matched to the length to ensure optimal stability.

MaxxDesign Exclusive Features:

• Fully rust-proof design with built-in height adjustment
• Compatible with any reference element (requires MaxxMacro A2391 WEDM 60mm Sliding Clamps when used)

Product Information:

The MaxxMacro MXRuler is the most versatile setup for your Wire EDM machine. It is available in various lengths (-XXX) to match different machine sizes, with each length paired with a specifically designed cross-section to ensure optimal stability and performance. The MXRuler is compatible with a wide range of accessories, allowing for quick and easy mounting of workpieces of various sizes and shapes.

The MaxxMacro MXRuler includes the following items:

• 1 MaxxMacro MXRuler
• 1 MaxxMacro Ruler Eccentric Endstop (MM-RUACR214)
• 2 pieces of MaxxMacro MXRuler A239 WEDM Clamps non-rail (MM-RUACA103)
• 2 pieces of MaxxMacro MXRuler 23922 WEDM Stepped Support Tab (MM-RUACR203)
• 2 pieces of MaxxMacro MXRuler 23925 WEDM Standard 60mm Support Tab (MM-RUACR201)
• 2 pieces of MaxxMacro MXRuler 239241 WEDM Basic Toe Clamps (MM-RUACR205)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Mitsubishi MP1200
• Mitsubishi MV1200R
• Mitsubishi MD Pro 3
• Mitsubishi NA12
• Mitsubishi NA1200
• Mitsubishi NA1200P
• Mitsubishi MV1200S
• Charmilles RoboFil 330
  
• Excetek V400G
  
• Fanuc alpha C400iB
• Fanuc alpha C400iC
  
• Sodick AL400G
• Sodick AL400P
• Sodick ALC400G
• Sodick ALN400G
• Sodick ALN400Q
• Sodick VL400Q
• Sodick AG400L
• Sodick AQ400L
• Sodick SL400G
• Sodick SL400Q
• Sodick SLC400G
• YCM Impuls 4

Vertical setup:

• Fanuc alpha 1iD
• Fanuc alpha 1iDP
• Fanuc alpha 1iE
• Fanuc alpha C600iA
• Fanuc alpha C600iB
• Fanuc alpha C600iC
• Mitsubishi BA24
• Mitsubishi NA24
• Mitsubishi NA2400
• Mitsubishi NA2400P
• Mitsubishi MP2400
• Mitsubishi MV2400R / R Z+
• Mitsubishi MV2400S Z+
  
• Makino DUO64
• Makino SP64 (yr 2005-)
  

MaxxMacro 239575 MXRuler Ruler 575mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. The rulers are available in various lengths (-XXX), to match different machines. The cross-section is matched to the length to ensure optimal stability.

MaxxDesign Exclusive Features:

• Enhanced rigidity with upgraded dimensions: 86 mm wide (up from 60 mm) and 36 mm high (up from 30 mm)
• Compatible with any reference element (requires MaxxMacro A2392 MXRuler WEDM Sliding 86mm Clamps)

Product Information:

The MaxxMacro MXRuler is the most versatile setup for your Wire EDM machine. It is available in various lengths (-XXX) to match different machine sizes, with each length paired with a specifically designed cross-section to ensure optimal stability and performance. The MXRuler is compatible with a wide range of accessories, allowing for quick and easy mounting of workpieces of various sizes and shapes.

The MaxxMacro MXRuler includes the following items:

• 1 MaxxMacro MXRuler
• 1 MaxxMacro Ruler Eccentric Endstop (MM-RUACR214)
• 2 pieces of MaxxMacro MXRuler A239 WEDM Clamps non-rail (MM-RUACA103)
• 3 pieces of MaxxMacro MXRuler 23922 WEDM Stepped Support Tab (MM-RUACR203)
• 2 pieces of MaxxMacro MXRuler 23925 WEDM Standard 60mm Support Tab (MM-RUACR201)
• 3 pieces of MaxxMacro MXRuler 239241 WEDM Basic Toe Clamps (MM-RUACR205)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• AgieCharmilles CUT 3000 / S / X (yr 2011-)
• AgieCharmilles CUT X 500
  
• Agie Challenge 3
  
• Agie Classic 3
  
• Agie Evolution 3
  
• Agie Excellence 3
  
• Agie Progress 3
  
• AgieCharmilles Progress VP3 (yr2014-2021)
  
• Agiecut Size 3
  

MaxxMacro 2003J1 MXRuler WEDM Reference Element 345mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Reference elements for machines with zero-line table. The length (L), hole spacing (C) and hole edge spacing (B) of the hardened reference elements are matched to the machine in question.

MaxxDesign Exclusive Features:

• Designed for mounting the MXRuler, MaxxMacro Mounting Heads, and other compatible accessories for flexible Wire EDM setups.
• High-quality materials with a fully rust-proof design for long-lasting performance

Product Information:

The MaxxMacro MXRuler Reference Element is available in various lengths to match different Wire EDM machines, with custom sizes available upon request. Each unit includes 1 MaxxMacro MXRuler Reference Element and 1 Adjustable End-Stop to support repeatable setups. Designed with a precision dovetail profile, this component serves as a mounting base not only for the MXRuler but also for a wide range of compatible MaxxMacro Wire EDM accessories. It is also compatible with MaxxMacro Leveling Heads, unlocking extensive configuration possibilities with both MXRuler accessories and Mounting Head components.

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• AgieCharmilles CUT 20P
  
• AgieCharmilles CUT 200 (yr 2012-)
  
• AgieCharmilles CUT 200 Bp
  
• AgieCharmilles CUT 200 C / P
  
• AgieCharmilles CUT 200 mS / Sp
  
• AgieCharmilles CUT C 350
  
• AgieCharmilles CUT E 350
  
• AgieCharmilles CUT P 350
  
• Charmilles 230/240 FI
  
• Charmilles RoboFil 230
  
• Charmilles RoboFil 240
  
• Charmilles RoboFil 240cc
  
• Charmilles RoboFil 690
  
• Charmilles RoboFil 690cc
  
• Fanuc Alpha 1A
  
• Fanuc alpha C400iB
  
• Fanuc alpha C400iC
  
• Sodick AQ900L
  
• Sodick AQ750L
  
• Sodick AQ327L
  
• Sodick AQ360L
  
• ONA AF60
  
• ONA AV60
  
• ONA AE600
  
• ONA AX6
  

Vertical setup:

• AgieCharmilles CUT 20P
  
• AgieCharmilles CUT 200 (yr 2012-)
  
• AgieCharmilles CUT 200 Bp
  
• AgieCharmilles CUT 200 C / P
  
• AgieCharmilles CUT 200 mS / Sp
  
• AgieCharmilles CUT 400 (yr 2012)
  
• AgieCharmilles CUT 400 Sp
  
• AgieCharmilles CUT C 350
  
• AgieCharmilles CUT E 350
  
• AgieCharmilles CUT P 350
  
• AgieCharmilles CUT P 800
  
• AgieCharmilles CUT P 800 L Flushing
  
• Charmilles RoboFil 230
  
• Charmilles RoboFil 240
  
• Charmilles RoboFil 240cc
  
• Makino U3 H.E.A.T. (Square)
  
• Makino U3 (U-shape)
  
• Makino U3i (Square)
  
• Makino U6 H.E.A.T. (Square)
  
• Makino U6 (U-shape)
  
• Makino U6i (Square)
  
• Makino U32j
  
• Makino UP32j
  
• Makino UPV-3
  
• Makino W32FB
  
• Makino DUO64
  
• Makino SP64 (yr -2005)
  
• Makino U32
  
• Makino U32i
  
• Makino WB32B
  
• Sodick AL600G
  
• Sodick ALC600G
  
• Sodick ALN600G
  
• Sodick ALN600Q
  
• Sodick AQ750L
  
• Sodick VL600Q
  
• Sodick AG600L
  
• Sodick AQ537L
  
• Sodick AQ560L
  
• Sodick AQ600L
  
• Sodick SL600G
  
• Sodick SL600P
  
• Sodick SL600Q
  
• Sodick SLC600G
  
• ONA AE600