Mitsubishi FA20

MaxxMacro 239545 MXRuler Ruler 545mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. The rulers are available in various lengths (-XXX), to match different machines. The cross-section is matched to the length to ensure optimal stability.

MaxxDesign Exclusive Features:

• Enhanced rigidity with upgraded dimensions: 86 mm wide (up from 60 mm) and 36 mm high (up from 30 mm)
• Compatible with any reference element (requires MaxxMacro A2392 MXRuler WEDM Sliding 86mm Clamps)

Product Information:

The MaxxMacro MXRuler is the most versatile setup for your Wire EDM machine. It is available in various lengths (-XXX) to match different machine sizes, with each length paired with a specifically designed cross-section to ensure optimal stability and performance. The MXRuler is compatible with a wide range of accessories, allowing for quick and easy mounting of workpieces of various sizes and shapes.

The MaxxMacro MXRuler includes the following items:

• 1 MaxxMacro MXRuler
• 1 MaxxMacro Ruler Eccentric Endstop (MM-RUACR214)
• 2 pieces of MaxxMacro MXRuler A239 WEDM Clamps non-rail (MM-RUACA103)
• 3 pieces of MaxxMacro MXRuler 23922 WEDM Stepped Support Tab (MM-RUACR203)
• 2 pieces of MaxxMacro MXRuler 23925 WEDM Standard 60mm Support Tab (MM-RUACR201)
• 3 pieces of MaxxMacro MXRuler 239241 WEDM Basic Toe Clamps (MM-RUACR205)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Excetek V500G
  
• Mitsubishi FA20-S Advance
  
• Mitsubishi FA20
  
• Mitsubishi FA20SM (old ver.)
  
• Mitsubishi FX20 (old ver.)
  
• Mitsubishi PA20
  
• Mitsubishi QA20
  
• Mitsubishi SX2
  
• Mitsubishi SX20
  
• Mitsubishi FA30
  
• Mitsubishi FX30
  
• Mitsubishi FX30K
  
• Seibu M50B
  
• Seibu MM50B
  
• Seibu 1JMM50B
  

Vertical setup:

• Mitsubishi FA30-S Advance
  
• Seibu MM75B
  

MaxxMacro 20047J2 MXRuler WEDM Reference Element 470mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Reference elements for machines with zero-line table. The length (L), hole spacing (C) and hole edge spacing (B) of the hardened reference elements are matched to the machine in question.

MaxxDesign Exclusive Features:

• Designed for mounting the MXRuler, MaxxMacro Mounting Heads, and other compatible accessories for flexible Wire EDM setups.
• High-quality materials with a fully rust-proof design for long-lasting performance

Product Information:

The MaxxMacro MXRuler Reference Element is available in various lengths to match different Wire EDM machines, with custom sizes available upon request. Each unit includes 1 MaxxMacro MXRuler Reference Element and 1 Adjustable End-Stop to support repeatable setups. Designed with a precision dovetail profile, this component serves as a mounting base not only for the MXRuler but also for a wide range of compatible MaxxMacro Wire EDM accessories. It is also compatible with MaxxMacro Leveling Heads, unlocking extensive configuration possibilities with both MXRuler accessories and Mounting Head components.

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• AgieCharmilles CUT C 600
  
• AgieCharmilles CUT E 600
  
• Excetek V500G
  
• Mitsubishi FA20-S Advance
• Mitsubishi FA40-S Advance
• Mitsubishi MV1200R
• Mitsubishi MP2400
  
• Mitsubishi MV2400R / R Z+
  
• Mitsubishi MV2400S
  
• Mitsubishi MV2400S Z+
  
• Mitsubishi FA20
  
• Mitsubishi FA20SM (old ver.)
  
• Mitsubishi FX20 (old ver.)
  
• Mitsubishi PA20
  
• Mitsubishi QA20
  
• Mitsubishi SX2
  
• Mitsubishi SX20
  
• Sodick AQ600L
  
• ONA AE400
  
• ONA AX4
  

Vertical setup:

• Fanuc alpha C400iA
  
• Fanuc alpha C400iB
  
• Fanuc alpha C400iC
  
• Mitsubishi FA10-S Advance
  
• Mitsubishi FA40-S Advance
  
• Mitsubishi MP1200
  
• Mitsubishi MV1200R
  
• Mitsubishi BA8
  
• Mitsubishi FA10 (Square)
  
• Mitsubishi FA10 SM (Square)
  
• Mitsubishi FX10 (Square)
  
• Mitsubishi FX10 K (Square)
  
• Mitsubishi MD Pro 2
  
• Mitsubishi MD Pro 3
  
• Mitsubishi NA12
  
• Mitsubishi NA1200
  
• Mitsubishi NA1200P
  
• Mitsubishi SX1
  
• Mitsubishi SX10
  
• Sodick VZ300L
  

MaxxMacro 2006J1 MXRuler WEDM Reference Element 545mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Reference elements for machines with zero-line table. The length (L), hole spacing (C) and hole edge spacing (B) of the hardened reference elements are matched to the machine in question.

MaxxDesign Exclusive Features:

• Designed for mounting the MXRuler, MaxxMacro Mounting Heads, and other compatible accessories for flexible Wire EDM setups.
• High-quality materials with a fully rust-proof design for long-lasting performance

Product Information:

The MaxxMacro MXRuler Reference Element is available in various lengths to match different Wire EDM machines, with custom sizes available upon request. Each unit includes 1 MaxxMacro MXRuler Reference Element and 1 Adjustable End-Stop to support repeatable setups. Designed with a precision dovetail profile, this component serves as a mounting base not only for the MXRuler but also for a wide range of compatible MaxxMacro Wire EDM accessories. It is also compatible with MaxxMacro Leveling Heads, unlocking extensive configuration possibilities with both MXRuler accessories and Mounting Head components.

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• AgieCharmilles CUT 400 (yr 2012)
  
• AgieCharmilles CUT 400 Sp
  
• AgieCharmilles CUT P 800
  
• AgieCharmilles CUT P 800 L Flushing
  
• Charmilles RoboFil 640
  
• Makino U6 H.E.A.T. (Square)
  
• Makino U6 (U-shape)
  
• Makino U6i (Square)
  
• Makino U53j
  
• Makino U53Tj
  
• Makino UP53j
  
• Makino UPV-5
  
• Makino W53FB
• Makino EU64
  
• Makino U53
  
• Makino U53i
  
• Makino WB53B
  

Vertical setup:

• AgieCharmilles CUT 300 mS / Sp
  
• AgieCharmilles CUT P 550
  
• AgieCharmilles CUT P 1250
  
• Charmilles RoboFil 430
  
• Charmilles RoboFil 440
  
• Makino U53j
  
• Makino U53Tj
  
• Makino UP53j
  
• Makino UPV-5
  
• Makino W53FB
  
• Makino U53
  
• Makino U53i
  
• Makino WB53B
  
• Mitsubishi FA20
  
• Mitsubishi FA20SM
  
• Mitsubishi FX20
  
• Mitsubishi PA20
  
• Mitsubishi QA20
  
• Sodick AL400G
  
• Sodick AL400P
  
• Sodick ALC400G
  
• Sodick ALN400G
  
• Sodick ALN400Q
  
• Sodick VL400Q
  
• Sodick AG400L
  
• Sodick SL400G
  
• Sodick SL400Q
  
• Sodick SLC400G
  

MaxxMacro 239395 MXRuler Ruler 395mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. The rulers are available in various lengths (-XXX), to match different machines. The cross-section is matched to the length to ensure optimal stability.

MaxxDesign Exclusive Features:

• Fully rust-proof design with built-in height adjustment
• Compatible with any reference element (requires MaxxMacro A2391 WEDM 60mm Sliding Clamps when used)

Product Information:

The MaxxMacro MXRuler is the most versatile setup for your Wire EDM machine. It is available in various lengths (-XXX) to match different machine sizes, with each length paired with a specifically designed cross-section to ensure optimal stability and performance. The MXRuler is compatible with a wide range of accessories, allowing for quick and easy mounting of workpieces of various sizes and shapes.

The MaxxMacro MXRuler includes the following items:

• 1 MaxxMacro MXRuler
• 1 MaxxMacro Ruler Eccentric Endstop (MM-RUACR214)
• 2 pieces of MaxxMacro MXRuler A239 WEDM Clamps non-rail (MM-RUACA103)
• 2 pieces of MaxxMacro MXRuler 23922 WEDM Stepped Support Tab (MM-RUACR203)
• 2 pieces of MaxxMacro MXRuler 23925 WEDM Standard 60mm Support Tab (MM-RUACR201)
• 2 pieces of MaxxMacro MXRuler 239241 WEDM Basic Toe Clamps (MM-RUACR205)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Mitsubishi FA10-S Advance
• Mitsubishi FA10
• Mitsubishi FA10 SM
• Mitsubishi FX10
• Mitsubishi FX10 K
• Mitsubishi SX1
• Mitsubishi SX10
  
• Sodick AQ325L
  
• Seibu M35B
• Seibu MM35B
• Accutex 300I

Vertical setup:

• Mitsubishi FA20-S Advance
• Mitsubishi FA20
• Mitsubishi FA20SM
• Mitsubishi X20
• Mitsubishi PA20
• Mitsubishi QA20
• Mitsubishi SX2
• Mitsubishi SX20
  
• Seibu MM50B
• Seibu 1JMM50B