MaxxMacro

Precision self-centering vise with dual-screw for perfect alignment. 65mm range, ideal for 5-axis CNC, modular jaws, and quick changeovers.

MaxxMacro 70 Pneumatic Chuck Internal Repair Kit includes O'rings, springs, bearings.

Precision self-centering vise with dual-screw for perfect alignment. 65mm range, ideal for 5-axis CNC, modular jaws, and quick changeovers.

MaxxMacro 70 Manual QuickChuck Low Profile Repair Kit Rust Proof

MaxxMacro 54 Multi 4 QuickChuck Chuck Precision Rail Rust Proof Precision rail with multiple chucks for easier installation and a more space-saving setup.

MaxxDesign Exclusive Features:

• Full rust-proof construction including chuck, internals, and 440C rail.
• 100% cross-compatible with OEM system

MaxxMacro 70 Stainless Control Ruler Master WEDM Master for horizontal Macro chucks. One long side ground to the Macro references. Supplied with engraved dimensions in the X-, Y- and Z-directions.

MaxxDesign Exclusive Features:

• Master for horizontal Macro chucks.
• 100% cross-compatible with OEM system

MaxxMacro 70 Stainless Control Ruler Master WEDM Master for horizontal Macro chucks. One long side ground to the Macro references. Supplied with engraved dimensions in the X-, Y- and Z-directions.

MaxxDesign Exclusive Features:

• Master for horizontal Macro chucks.
• 100% cross-compatible with OEM system

MaxxMacro 70 Stainless Self Centering Vise 80x120mm Precision self-centering vise with dual-screw for perfect alignment. 120mm range, ideal for 5-axis CNC, modular jaws, and quick changeovers.

Product Information:

Precision-engineered self-centering vise designed for high-accuracy machining applications. Featuring a robust build and dual screw mechanisms, it ensures perfect workpiece alignment and repeatability. With a clamping range of 120 mm, it’s ideal for 5-axis CNC operations, modular setups, and quick part changes.

MaxxMagnum Stainless Self Centering Vise 80x120mm Precision self-centering vise with dual-screw for perfect alignment. 120mm range, ideal for 5-axis CNC, modular jaws, and quick changeovers.

Product Information:

Precision-engineered self-centering vise designed for high-accuracy machining applications. Featuring a robust build and dual screw mechanisms, it ensures perfect workpiece alignment and repeatability. With a clamping range of 120 mm, it’s ideal for 5-axis CNC operations, modular setups, and quick part changes.

MaxxMacro 70 Stainless Self Centering Vise 80x120mm Precision self-centering vise with dual-screw for perfect alignment. 120mm range, ideal for 5-axis CNC, modular jaws, and quick changeovers.

Product Information:

Precision-engineered self-centering vise designed for high-accuracy machining applications. Featuring a robust build and dual screw mechanisms, it ensures perfect workpiece alignment and repeatability. With a clamping range of 120 mm, it’s ideal for 5-axis CNC operations, modular setups, and quick part changes.

MaxxMagnum Stainless Self Centering Vise 80x120mm Precision self-centering vise with dual-screw for perfect alignment. 120mm range, ideal for 5-axis CNC, modular jaws, and quick changeovers.

Product Information:

Precision-engineered self-centering vise designed for high-accuracy machining applications. Featuring a robust build and dual screw mechanisms, it ensures perfect workpiece alignment and repeatability. With a clamping range of 120 mm, it’s ideal for 5-axis CNC operations, modular setups, and quick part changes.

MaxxMacro 54 Stainless Full Blank Round Stock Holder comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. To mount electrodes and workpieces of various shapes.

MaxxDesign Exclusive Features:

• 100% cross-compatible with OEM system
• No Chip Carrier (Chip Sensor) nor threaded holes for Cleat

Product Information:

The MaxxMacro 54 Stainless Full Blank Round Stock Holder comes completely assembled with our MaxxMacro 54 Plated Pallet and is ready to machine your own custom pattern into. MaxxMacro 54 Stainless Electrode Holders are assembled with Stainless screws and our MaxxMacro 54 Stainless Cast Pallet Plated

MaxxMacro 70 Twin Manual Angle Adapter 90 Degree Adapter comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. For horizontal mounting of MaxxMacro holders.

MaxxDesign Exclusive Features:

• Includes two MaxxMacro Manual Chucks
• Positional accuracy to data. 004mm

Product Information:

MaxxMacro 70 Twin Manual Angle Adapter 90 Degree Adapter allows user to quickly go from vertical to horizontal position while maintaining location and accuracy. Rounded corners allowing closer access to burn locations without the worry of corners tagging.

MaxxMacro 54 Stainless Blank Round Stock Holder comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. To mount electrodes and workpieces of various shapes.

MaxxDesign Exclusive Features:

• 100% cross-compatible with OEM system
• Includes Chip Carrier (Chip Sensor) and threaded holes for Cleat.

Product Information:

The MaxxMacro 54 Stainless Blank Round Stock Holder comes completely assembled with our MaxxMacro 54 Plated Pallet and is ready to machine your own custom pattern into. MaxxMacro 54 Stainless Pocket Electrode Holders are assembled with Stainless screws and our MaxxMacro 54 Stainless Cast Pallet Plated

MaxxMacro 54 Stainless Full Blank Round Stock Holder comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. To mount electrodes and workpieces of various shapes.

MaxxDesign Exclusive Features:

• 100% cross-compatible with OEM system
• No Chip Carrier (Chip Sensor) nor threaded holes for Cleat

Product Information:

The MaxxMacro 54 Stainless Full Blank Round Stock Holder comes completely assembled with our MaxxMacro 54 Plated Pallet and is ready to machine your own custom pattern into. MaxxMacro 54 Stainless Electrode Holders are assembled with Stainless screws and our MaxxMacro 54 Stainless Cast Pallet Plated

MaxxMacro 70 Twin Manual Angle Adapter 90 Degree Adapter comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. For horizontal mounting of MaxxMacro holders.

MaxxDesign Exclusive Features:

• Includes two MaxxMacro Manual Chucks
• Positional accuracy to data. 004mm

Product Information:

MaxxMacro 70 Twin Manual Angle Adapter 90 Degree Adapter allows user to quickly go from vertical to horizontal position while maintaining location and accuracy. Rounded corners allowing closer access to burn locations without the worry of corners tagging.

MaxxMacro 54 Brass Full Blank Holder comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. To mount electrodes and workpieces of various shapes.

MaxxDesign Exclusive Features:

• 100% cross-compatible with OEM system
• No Chip Carrier (Chip Sensor) nor threaded holes for Cleat

Product Information:

The MaxxMacro 54 Blank Electrode Holder comes completely assembled with our MaxxMacro 54 Plated Pallet and is ready to machine your own custom pattern into. We provide both top and bottom (Pallet) precision ground.

MaxxMacro 54 Super Vise Compact comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Vise for mounting rectangular workpieces in the MaxxMacro system. Clearance on all sides.

MaxxDesign Exclusive Features:

• High quality materials: Full rust proof design.
• Clearance: on all sides.

Includes 3 pair of jaws and 1 set of screws.

Compatible with Maxx-ER and MaxxMacro UnoSet vises.

MaxxMacro 54 Stainless Full Blank Holder comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. To mount electrodes and workpieces of various shapes.

MaxxDesign Exclusive Features:

• 100% cross-compatible with OEM system
• No Chip Carrier (Chip Sensor) nor threaded holes for Cleat

Product Information:

The MaxxMacro 54 Blank Electrode Holder comes completely assembled with our MaxxMacro 54 Plated Pallet and is ready to machine your own custom pattern into. We provide both top and bottom (Pallet) precision ground. MaxxMacro 54 Stainless Electrode Holders are assembled with Stainless screws and our MaxxMacro 54 Stainless Cast Pallet Plated

MaxxMacro 54 Brass Full Blank Holder comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. To mount electrodes and workpieces of various shapes.

MaxxDesign Exclusive Features:

• 100% cross-compatible with OEM system
• No Chip Carrier (Chip Sensor) nor threaded holes for Cleat

Product Information:

The MaxxMacro 54 Blank Electrode Holder comes completely assembled with our MaxxMacro 54 Plated Pallet and is ready to machine your own custom pattern into. We provide both top and bottom (Pallet) precision ground.

MaxxMacro 54 Aluminum Full Blank Holder comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. To mount electrodes and workpieces of various shapes.

MaxxDesign Exclusive Features:

• 100% cross-compatible with OEM system
• No Chip Carrier (Chip Sensor) nor threaded holes for Cleat

Product Information:

MaxxMacro 54 Aluminum Blank Electrode Holder is Maxx Tooling's cross compatible System 3R EDM blank aluminum electrode holder. MaxxMacro 54 Aluminum Blank Electrode Holder is fully assembled with the MaxxMacro 54 Stainless Cast Pallet mounted and ready to machine your own pattern.

MaxxMacro 54 Aluminum Full Blank Holder comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. To mount electrodes and workpieces of various shapes.

MaxxDesign Exclusive Features:

• 100% cross-compatible with OEM system
• No Chip Carrier (Chip Sensor) nor threaded holes for Cleat

Product Information:

MaxxMacro 54 Aluminum Blank Electrode Holder is Maxx Tooling's cross compatible System 3R EDM blank aluminum electrode holder. MaxxMacro 54 Aluminum Blank Electrode Holder is fully assembled with the MaxxMacro 54 Stainless Cast Pallet mounted and ready to machine your own pattern.

MaxxMacro 2391 Double Ruler Vise MXRuler Accessory WEDM comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Movable jaws for mounting two rectangular workpieces at the same time. Detachable Z-support tabs ensure simple setting-up.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

MaxxMacro 2391 MXRuler WEDM Ruler Vise features movable jaws for an extensive range of rectangular items and detachable Z-support tabs to ensure simple setting-up. To be mounted on ruler MX-239XXX. MaxxMacro 2391 MXRuler WEDM Ruler Vise is fully compatible with System 3R ruler system. Recommended maximum workpiece weight 7 kg. Tightening torque 8 Nm Supplied with two MaxxMacro 23926 MXRuler WEDM Zero-line support tab

MaxxMacro 54 Stainless Full Blank Holder comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. To mount electrodes and workpieces of various shapes.

MaxxDesign Exclusive Features:

• 100% cross-compatible with OEM system
• No Chip Carrier (Chip Sensor) nor threaded holes for Cleat

Product Information:

The MaxxMacro 54 Blank Electrode Holder comes completely assembled with our MaxxMacro 54 Plated Pallet and is ready to machine your own custom pattern into. We provide both top and bottom (Pallet) precision ground. MaxxMacro 54 Stainless Electrode Holders are assembled with Stainless screws and our MaxxMacro 54 Stainless Cast Pallet Plated

MaxxMacro 54 Manual QuickChuck Chuck with WEDM Adapter comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. To transition from the MaxxMacro WEDM Mounting Head system to a MaxxMacro 54 Quickchuck, the setup sits just above the zero line on Wire EDM machines.

MaxxDesign Exclusive Features:

• Rust Proof design suited for submerged.
• QuickChuck bar action for fast, manual fixture changes

MaxxMacro 54 Aluminum Full Blank Holder comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. To mount electrodes and workpieces of various shapes.

MaxxDesign Exclusive Features:

• 100% cross-compatible with OEM system
• No Chip Carrier (Chip Sensor) nor threaded holes for Cleat

Product Information:

MaxxMacro 54 Aluminum Blank Electrode Holder is Maxx Tooling's cross compatible System 3R EDM blank aluminum electrode holder. MaxxMacro 54 Aluminum Blank Electrode Holder is fully assembled with the MaxxMacro 54 Stainless Cast Pallet mounted and ready to machine your own pattern.

MaxxMacro 70 Multi 3 Manual Chuck Precision Rail comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Precision rail with multiple chucks for easier installation and a more space-saving setup.

MaxxDesign Exclusive Features:

• High quality materials: Chuck is 440C and rail is 420.
• 100% cross-compatible with OEM system

MaxxMacro 54 Aluminum Full Blank Holder comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. To mount electrodes and workpieces of various shapes.

MaxxDesign Exclusive Features:

• 100% cross-compatible with OEM system
• No Chip Carrier (Chip Sensor) nor threaded holes for Cleat

Product Information:

MaxxMacro 54 Aluminum Blank Electrode Holder is Maxx Tooling's cross compatible System 3R EDM blank aluminum electrode holder. MaxxMacro 54 Aluminum Blank Electrode Holder is fully assembled with the MaxxMacro 54 Stainless Cast Pallet mounted and ready to machine your own pattern.

MaxxMacro 54 Manual QuickChuck Chuck with WEDM Adapter comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. To transition from the MaxxMacro WEDM Mounting Head system to a MaxxMacro 54 Quickchuck, the setup sits just above the zero line on Wire EDM machines.

MaxxDesign Exclusive Features:

• Rust Proof design suited for submerged.
• QuickChuck bar action for fast, manual fixture changes

MaxxMacro 54 Manual QuickChuck Chuck with WEDM Adapter comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. To transition from the MaxxMacro WEDM Mounting Head system to a MaxxMacro 54 Quickchuck, the setup sits just above the zero line on Wire EDM machines.

MaxxDesign Exclusive Features:

• Rust Proof design suited for submerged.
• QuickChuck bar action for fast, manual fixture changes

MaxxMacro 54 Manual QuickChuck Chuck with WEDM Adapter comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. To transition from the MaxxMacro WEDM Mounting Head system to a MaxxMacro 54 Quickchuck, the setup sits just above the zero line on Wire EDM machines.

MaxxDesign Exclusive Features:

• Rust Proof design suited for submerged.
• QuickChuck bar action for fast, manual fixture changes

MaxxMacro 54 Manual QuickChuck Chuck with WEDM Adapter comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. To transition from the MaxxMacro WEDM Mounting Head system to a MaxxMacro 54 Quickchuck, the setup sits just above the zero line on Wire EDM machines.

MaxxDesign Exclusive Features:

• Rust Proof design suited for submerged.
• QuickChuck bar action for fast, manual fixture changes

MaxxMacro 70 Multi 3 Manual Chuck Precision Rail comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Precision rail with multiple chucks for easier installation and a more space-saving setup.

MaxxDesign Exclusive Features:

• High quality materials: Chuck is 440C and rail is 420.
• 100% cross-compatible with OEM system

MaxxMacro 29333 Universal WEDM Holder comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Holder for round workpieces Ø8-100 mm, or rectangular workpieces up to 100 mm.

MaxxDesign Exclusive Features:

• 100% cross-compatible with OEM system
• Mounts on Mounting Head, HP, Magnum or MacroTwin leveling adapter.

Product Information:

MaxxMacro 29333 Universal Holder is a Holder for round workpieces 8-100 mm, or rectangular workpieces up to 100 mm; and can be mounted on HP, Magnum or Leveling Adapter. MaxxMacro 29333 Universal Holder is fully compatible with System 3R system.

MaxxMacro 70 Low Profile Manual Chuck with Mounting Plate comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Rust resistant chuck with adapter plate.

MaxxDesign Exclusive Features:

• Low Profile design.
• Versatile mounting plate.

Product Information:

MaxxMacro 70 Low Profile Manual Chuck with Mounting Plate is specifically designed to be quickly mounted to any CNC machine table. MaxxMacro 70 Low Profile Manual Chuck with Mounting Plate does not require and special plate or fixture to mount securely to your machine.

MaxxMacro 54 Multi 6 QuickChuck Chuck Precision Rail comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Precision rail with multiple chucks for easier installation and a more space-saving setup.

MaxxDesign Exclusive Features:

• Multi-Chuck Rail System allows simultaneous actuation.
• 100% cross-compatible with MaxxMacro 54 and OEM System

MaxxMacro 54 Manual QuickChuck Chuck with WEDM Adapter comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. To transition from the MaxxMacro WEDM Mounting Head system to a MaxxMacro 54 Quickchuck, the setup sits just above the zero line on Wire EDM machines.

MaxxDesign Exclusive Features:

• Rust Proof design suited for submerged.
• QuickChuck bar action for fast, manual fixture changes

MaxxMacro 70 Multi 3 Manual Chuck Precision Rail comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Precision rail with multiple chucks for easier installation and a more space-saving setup.

MaxxDesign Exclusive Features:

• High quality materials: Chuck is 440C and rail is 420.
• 100% cross-compatible with OEM system

MaxxMacro 29333 Universal WEDM Holder comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Holder for round workpieces Ø8-100 mm, or rectangular workpieces up to 100 mm.

MaxxDesign Exclusive Features:

• 100% cross-compatible with OEM system
• Mounts on Mounting Head, HP, Magnum or MacroTwin leveling adapter.

Product Information:

MaxxMacro 29333 Universal Holder is a Holder for round workpieces 8-100 mm, or rectangular workpieces up to 100 mm; and can be mounted on HP, Magnum or Leveling Adapter. MaxxMacro 29333 Universal Holder is fully compatible with System 3R system.

MaxxMacro 70 Low Profile Manual Chuck with Mounting Plate comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Rust resistant chuck with adapter plate.

MaxxDesign Exclusive Features:

• Low Profile design.
• Versatile mounting plate.

Product Information:

MaxxMacro 70 Low Profile Manual Chuck with Mounting Plate is specifically designed to be quickly mounted to any CNC machine table. MaxxMacro 70 Low Profile Manual Chuck with Mounting Plate does not require and special plate or fixture to mount securely to your machine.

MaxxMacro 54 Multi 6 QuickChuck Chuck Precision Rail comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Precision rail with multiple chucks for easier installation and a more space-saving setup.

MaxxDesign Exclusive Features:

• Multi-Chuck Rail System allows simultaneous actuation.
• 100% cross-compatible with MaxxMacro 54 and OEM System

MaxxMacro 54 Manual QuickChuck Chuck with WEDM Adapter comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. To transition from the MaxxMacro WEDM Mounting Head system to a MaxxMacro 54 Quickchuck, the setup sits just above the zero line on Wire EDM machines.

MaxxDesign Exclusive Features:

• Rust Proof design suited for submerged.
• QuickChuck bar action for fast, manual fixture changes

MaxxMacro 70 Multi 3 Manual Chuck Precision Rail comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Precision rail with multiple chucks for easier installation and a more space-saving setup.

MaxxDesign Exclusive Features:

• High quality materials: Chuck is 440C and rail is 420.
• 100% cross-compatible with OEM system

MaxxMacro 2328 SuperVise WEDM Vise comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Vice for mounting rectangular (<60 mm) and round (Ø8-45 mm) workpieces in the WEDM system.

MaxxDesign Exclusive Features:

• High quality materials: Full 440C rust proof design.
• Vise for mounting rectangular (<60 mm) workpieces in the WEDM system.

MaxxMacro 70 Multi 4 Pneumatic Chuck 6001030 System comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Precision rail with multiple chucks for easier installation and a more space-saving setup.

MaxxDesign Exclusive Features:

• Multi-Chuck Rail System allows simultaneous actuation.
• Air Clean function of Z pads

Product Information:

The MaxxMacro 70 Multi 4 Pneumatic Chuck 6001030 System delivers high-performance precision and accuracy for diverse machining applications. It is 100% cross-compatible with System 3R Macro, allowing seamless integration into existing setups. At its core is the Pneumatic 6001030 Chuck, equipped with an Air Clean function to keep the chucks free of dust and debris, ensuring a cleaner and more efficient machining process. The chucks operate as a synchronized system for consistent, reliable performance, while also offering customization options to suit various project requirements. Ideal for both small and large-scale machining, the MaxxMacro 70 Multi Chuck Rail System provides the precision, reliability, and flexibility manufacturers need to achieve exceptional results every time.

MaxxMacro 2372 Holder WEDM Holder comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. For mounting a fixture, workpiece, or various accessories on the leveling head.

MaxxDesign Exclusive Features:

• Can be supplemented with MXRuler accessories.
• Mounts on an Mounting Head.

MaxxMacro 70 Stainless Mounting Plate for Low Profile Manual Chuck comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• High quality materials: Full stainless steel design.
• Chuck not included

Product Information:

For chuck: MM-MK70R000 (MX-6004-70RS) MaxxMacro 70 Low Profile Manual Chuck Rust Proof WEDM

MaxxMacro 2301 Clamping kit M6 MXRuler Accessory WEDM comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. For clamping workpieces on MXrulers, etc.

MaxxDesign Exclusive Features:

• Complete M6 clamping kit for securing workpieces.
• Compatible with MaxxMacro MXRuler and other fixturing systems

Product Information:

MaxxMacro 2301 MXRuler WEDM Clamping kit M6 provides a full set of hardware to complement your MaxxMacro MXRuler, including: MaxxMacro 239241 Basic Toe Clamps MXRuler Accessory WEDM MM-RUACR205; MaxxMacro Vise Spacer 50 mm WEDM Replacement MM-WERPW001; MaxxTooling Torque Wrench for Allen Inserts (7Nm) Spare Part MX-TRWRX007; MaxxTooling Double Side Open Wrench 10mm Spare Part MX-DSWRX010; SHCS M6x1x50mm; SHCS M6x1x40mm; SHCS M6x1x30mm; SHCS M6x1x20mm; SHCS M6x1x10mm; SSFP M6x1x50mm; SSFP M6x1x30mm; SSFP M6x1x10mm; Allen Key 5mm

MaxxMacro 2611 Adjustable Support MXRuler Accessory WEDM comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. For mounting directly on the machine table.

MaxxDesign Exclusive Features:

• High quality materials: Full 440C rust proof design.
• Adjustable length 35-135 mm.

MaxxMacro 70 Manual QuickChuck Low Profile Chuck Rust Proof for Reference Element comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. QuickChuck adapter for MaxxMacro holder in the WEDM system.

MaxxDesign Exclusive Features:

• Rust Proof design suited for submerged.
• QuickChuck bar action for fast, manual fixture changes

Product Information:

Note: When mounted on the reference element, the two clamping jaws must be tightened with the same torque, 4 Nm.

MaxxMacro 29333 Universal WEDM Holder comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Holder for round workpieces Ø8-100 mm, or rectangular workpieces up to 100 mm.

MaxxDesign Exclusive Features:

• 100% cross-compatible with OEM system
• Mounts on Mounting Head, HP, Magnum or MacroTwin leveling adapter.

Product Information:

MaxxMacro 29333 Universal Holder is a Holder for round workpieces 8-100 mm, or rectangular workpieces up to 100 mm; and can be mounted on HP, Magnum or Leveling Adapter. MaxxMacro 29333 Universal Holder is fully compatible with System 3R system.

MaxxMacro 70 Low Profile Manual Chuck with Mounting Plate comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Rust resistant chuck with adapter plate.

MaxxDesign Exclusive Features:

• Low Profile design.
• Versatile mounting plate.

Product Information:

MaxxMacro 70 Low Profile Manual Chuck with Mounting Plate is specifically designed to be quickly mounted to any CNC machine table. MaxxMacro 70 Low Profile Manual Chuck with Mounting Plate does not require and special plate or fixture to mount securely to your machine.

MaxxMacro 54 Multi 6 QuickChuck Chuck Precision Rail comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Precision rail with multiple chucks for easier installation and a more space-saving setup.

MaxxDesign Exclusive Features:

• Multi-Chuck Rail System allows simultaneous actuation.
• 100% cross-compatible with MaxxMacro 54 and OEM System

MaxxMacro 54 Manual QuickChuck Chuck with WEDM Adapter comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. To transition from the MaxxMacro WEDM Mounting Head system to a MaxxMacro 54 Quickchuck, the setup sits just above the zero line on Wire EDM machines.

MaxxDesign Exclusive Features:

• Rust Proof design suited for submerged.
• QuickChuck bar action for fast, manual fixture changes

MaxxMacro 70 Multi 3 Manual Chuck Precision Rail comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Precision rail with multiple chucks for easier installation and a more space-saving setup.

MaxxDesign Exclusive Features:

• High quality materials: Chuck is 440C and rail is 420.
• 100% cross-compatible with OEM system

MaxxMacro 54 Multi 6 QuickChuck Chuck Precision Rail comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Precision rail with multiple chucks for easier installation and a more space-saving setup.

MaxxDesign Exclusive Features:

• Multi-Chuck Rail System allows simultaneous actuation.
• 100% cross-compatible with MaxxMacro 54 and OEM System

Supplied in sets of 2.

MaxxMacro 54 Manual QuickChuck Chuck with WEDM Adapter comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. To transition from the MaxxMacro WEDM Mounting Head system to a MaxxMacro 54 Quickchuck, the setup sits just above the zero line on Wire EDM machines.

MaxxDesign Exclusive Features:

• Rust Proof design suited for submerged.
• QuickChuck bar action for fast, manual fixture changes

MaxxMacro 2328 SuperVise WEDM Vise comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Vice for mounting rectangular (<60 mm) and round (Ø8-45 mm) workpieces in the WEDM system.

MaxxDesign Exclusive Features:

• High quality materials: Full 440C rust proof design.
• Vise for mounting rectangular (<60 mm) workpieces in the WEDM system.

MaxxMacro 70 Multi 3 Manual Chuck Precision Rail comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Precision rail with multiple chucks for easier installation and a more space-saving setup.

MaxxDesign Exclusive Features:

• High quality materials: Chuck is 440C and rail is 420.
• 100% cross-compatible with OEM system

MaxxMagnum 29266HP WEDM Ruler comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Adapter to connect leveling head to any MXRuler accessory.

MaxxDesign Exclusive Features:

• High quality materials: Full 440C rust proof design.
• Mounts on an Mounting Head and can be supplemented with MXRuler accessories.

Product Information:

MaxxMagnum 29266HP WEDM Ruler is the ideal adapter to connect a MaxxMacro Leveling Head setup with the MXRuler system. If you are already using a MaxxMacro Leveling Head—compatible with various MaxxMacro Leveling Head WEDM accessories—this Magnum adapter allows you to expand your setup by seamlessly integrating any MXRuler accessories. Maximize the versatility of your existing configuration and unlock a wider range of tooling options with this smart and powerful solution. The MaxxMagnum 29266HP WEDM Ruler includes the following items: MaxxMagnum 29266HP WEDM Ruler; MaxxMacro Ruler Eccentric Endstop (MM-RUACR214); MaxxMacro MXRuler 23922 WEDM Stepped Support Tab (MM-RUACR203); MaxxMacro MXRuler 23925 WEDM Standard 60mm Support Tab (MM-RUACR201); MaxxMacro MXRuler 239241 WEDM Basic Toe Clamps (MM-RUACR205).

MaxxTooling Spring Loaded Probe Replacement Tip 8mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

MaxxMacro and Maxx-ER Spring Loaded Probe Replacement Tip 8mm

This tip functions on all MaxxMacro, Maxx-ER and Erowa spring loaded probes

8MM Ball Diameter

Product Details:

MaxxMacro 70 Multi 4 Pneumatic Chuck 6001030 System comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Precision rail with multiple chucks for easier installation and a more space-saving setup.

MaxxDesign Exclusive Features:

• Multi-Chuck Rail System allows simultaneous actuation.
• Air Clean function of Z pads

Product Information:

The MaxxMacro 70 Multi 4 Pneumatic Chuck 6001030 System delivers high-performance precision and accuracy for diverse machining applications. It is 100% cross-compatible with System 3R Macro, allowing seamless integration into existing setups. At its core is the Pneumatic 6001030 Chuck, equipped with an Air Clean function to keep the chucks free of dust and debris, ensuring a cleaner and more efficient machining process. The chucks operate as a synchronized system for consistent, reliable performance, while also offering customization options to suit various project requirements. Ideal for both small and large-scale machining, the MaxxMacro 70 Multi Chuck Rail System provides the precision, reliability, and flexibility manufacturers need to achieve exceptional results every time.

MaxxMacro 2372 Holder WEDM Holder comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. For mounting a fixture, workpiece, or various accessories on the leveling head.

MaxxDesign Exclusive Features:

• Can be supplemented with MXRuler accessories.
• Mounts on an Mounting Head.

MaxxMacro 70 Stainless Mounting Plate for Low Profile Manual Chuck comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• High quality materials: Full stainless steel design.
• Chuck not included

Product Information:

For chuck: MM-MK70R000 (MX-6004-70RS) MaxxMacro 70 Low Profile Manual Chuck Rust Proof WEDM

MaxxMacro 2301 Clamping kit M6 MXRuler Accessory WEDM comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. For clamping workpieces on MXrulers, etc.

MaxxDesign Exclusive Features:

• Complete M6 clamping kit for securing workpieces.
• Compatible with MaxxMacro MXRuler and other fixturing systems

Product Information:

MaxxMacro 2301 MXRuler WEDM Clamping kit M6 provides a full set of hardware to complement your MaxxMacro MXRuler, including: MaxxMacro 239241 Basic Toe Clamps MXRuler Accessory WEDM MM-RUACR205; MaxxMacro Vise Spacer 50 mm WEDM Replacement MM-WERPW001; MaxxTooling Torque Wrench for Allen Inserts (7Nm) Spare Part MX-TRWRX007; MaxxTooling Double Side Open Wrench 10mm Spare Part MX-DSWRX010; SHCS M6x1x50mm; SHCS M6x1x40mm; SHCS M6x1x30mm; SHCS M6x1x20mm; SHCS M6x1x10mm; SSFP M6x1x50mm; SSFP M6x1x30mm; SSFP M6x1x10mm; Allen Key 5mm

MaxxMacro 2611 Adjustable Support MXRuler Accessory WEDM comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. For mounting directly on the machine table.

MaxxDesign Exclusive Features:

• High quality materials: Full 440C rust proof design.
• Adjustable length 35-135 mm.

MaxxMacro Rail Clamps Screw Replacement MXRuler Accessory comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

MaxxMacro MXRuler WEDM Rail Clamps Screw Replacement for both MaxxMacro MXRuler A2391 WEDM 60mm Clamps and MaxxMacro MXRuler A2392 WEDM 86mm Clamps.

MaxxMacro Eccentric Endstop MXRuler Accessory WEDM comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

The MaxxMacro Ruler Eccentric Endstop functions as a precise position stop on the MXRuler, ensuring accurate alignment for workpieces.

MaxxMacro 70 Manual QuickChuck Low Profile Chuck Rust Proof for Reference Element comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. QuickChuck adapter for MaxxMacro holder in the WEDM system.

MaxxDesign Exclusive Features:

• Rust Proof design suited for submerged.
• QuickChuck bar action for fast, manual fixture changes

Product Information:

Note: When mounted on the reference element, the two clamping jaws must be tightened with the same torque, 4 Nm.

MaxxMacro 29333 Universal WEDM Holder comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Holder for round workpieces Ø8-100 mm, or rectangular workpieces up to 100 mm.

MaxxDesign Exclusive Features:

• 100% cross-compatible with OEM system
• Mounts on Mounting Head, HP, Magnum or MacroTwin leveling adapter.

Product Information:

MaxxMacro 29333 Universal Holder is a Holder for round workpieces 8-100 mm, or rectangular workpieces up to 100 mm; and can be mounted on HP, Magnum or Leveling Adapter. MaxxMacro 29333 Universal Holder is fully compatible with System 3R system.

MaxxMacro 70 Low Profile Manual Chuck with Mounting Plate comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Rust resistant chuck with adapter plate.

MaxxDesign Exclusive Features:

• Low Profile design.
• Versatile mounting plate.

Product Information:

MaxxMacro 70 Low Profile Manual Chuck with Mounting Plate is specifically designed to be quickly mounted to any CNC machine table. MaxxMacro 70 Low Profile Manual Chuck with Mounting Plate does not require and special plate or fixture to mount securely to your machine.

MaxxTooling V-Block Holder Vise Clamping shackle 20mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Spare clamping shackle for V-Block holder, for smaller parts.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

Spare Clamping shackle for Maxx-ER V-block Holder 016691 Unoset and MaxxMacro 54 HP Vblock WEDM V-block Holder for parts up to ⌀20mm.

MaxxMacro 23926 Stepped 60mm Support Tab MXRuler Accessory WEDM (Set of 2) comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Support tab adjusted by -5 mm. For MXruler.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

MaxxMacro MXRuler 23926 WEDM Stepped 60mm Support Tab (Set of 2) for positioning workpieces 5 mm above machine zero line. This tab enables precise, accurate, and reliable positioning of workpieces, drastically reducing the time required for quality assurance in production processes. The MaxxMacro MX-23926 MXRuler WEDM Zero-line support tab is fully compatible with System 3R ruler system. Recommended maximum workpiece weight per tap 50 kg.

MaxxMacro 54 Stainless Mounting Plate for Manual QuickChuck comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

MaxxMacro 54 Chuck Mounting Plate is specifically designed to mount a MaxxMacro 54 quick chuck onto the machine table. It offers a precise fit for lasting durability and stability, ensuring the chuck is held securely in place with minimal vibration. For MaxxMacro Chuck 54 Quick Chuck. *Chuck not included

MaxxMacro 54 Multi 5 QuickChuck Chuck Precision Rail comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Precision rail with multiple chucks for easier installation and a more space-saving setup.

MaxxDesign Exclusive Features:

• Multi-chuck system on a common mounting plate for compact setups.
• Supports multiple operations to increase productivity.

MaxxMacro 2015A Angle shelf MXRuler Accessory WEDM comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Mounts directly on the machine table. For vertical mounting of a MaxxMacro chuck in the machine.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

MaxxMacro 2015A WEDM Angle shelf mounts directly on the machine table. For vertical mounting of a Macro chuck in the machine. Its design ensures maximum stability for precise and reliable accuracy. Enjoying the ease of installation without the need for further attachments. MaxxMacro 2015A WEDM Angle shelf is fully compatible with System 3R macro system. *Chuck not included

MaxxMacro 54 Stainless Round Stock Holder 1.25" comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Holder for round electrodes.

MaxxDesign Exclusive Features:

• Fully assembled on a plated MaxxMacro 54 Stainless Cast Pallet.
• 100% cross-compatible with OEM system

Product Information:

The MaxxMacro 54 Round Stock Stainless Electrode Holder features a pocket with a tight tolerance of -0 / +0.001" and a depth of 0.625". The workpiece is securely held by a stainless steel set screw. Fully compatible with System 3R Macro tooling, this precision-machined holder delivers repeatability within 0.002 mm. It comes fully assembled on a plated MaxxMacro 54 Stainless Cast Pallet, ready for immediate use.

MaxxMacro 54 Manual Chuck with Flange 60023 Rust Proof comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Cast chuck with mounting flange for mounting on the machine spindle or in a fixture.

MaxxDesign Exclusive Features:

• Includes flange
• Rust-resistant stainless steel body.

Product Information:

MaxxMacro 54 Manual Chuck with Flange 60023 Rust Proof is a rust-resistant, cast stainless steel chuck built for permanent mounting on a machine spindle. Its precision-ground back face ensures accurate installation, while the integrated mounting flange supports standard Macro holders. Designed for manual operation, it features four fixed index positions (4×90°).

MaxxMacro 54 Aluminum Slotted Electrode Holder U25x4" comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Holder for flat electrodes, designed for use with saw cut or milled blanks.

MaxxDesign Exclusive Features:

• Fully assembled on a MaxxMacro 54 Stainless Performance Pallet
• Ideal for ribs and long electrodes with 4" of clamping area for a stable burn.

Product Information:

The MaxxMacro 54 Aluminum x 4" Slotted Electrode Holder is fully compatible with System 3R Macro holders. It includes six set screws and comes fully assembled on a MaxxMacro 54 Performance Pallet—mounted and ready to run. Designed for saw-cut or milled blanks, it's ideal for ribs and long electrodes. The 4-inch mounting area ensures a rigid setup for consistent, high-quality burns. This model is stocked exclusively in aluminum to reduce weight and avoid load issues seen with stainless or brass versions.

MaxxMacro 70 Twin Pneumatic Low Profile Chuck 30210 Rust Proof comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Pneumatic chuck for MaxxMacro or MaxxMacroTwin. Horizontal mounting on the machine table.

MaxxDesign Exclusive Features:

• Twin Pneumatic Chuck with High Clamping Force
• Air-blast cleaning for Z-reference surfaces

Product Information:

Experience effortless, precise machining with the MaxxMacro 70 Twin Pneumatic Low Profile Chuck 30210 Rust Proof. Fully 100% cross-compatible with System 3R models 3R-602.10-1, 3R-602.12-1, and 3R-602.12-1K, this chuck features horizontal mounting to reduce setup time and costs. Its quick-change design enables fast, safe, and high-precision operations, ideal for demanding applications. The chuck includes air-blast cleaning for Z-reference surfaces to ensure accurate positioning and offers a powerful clamping force of 2 × 6700 N for secure workholding.

MaxxMacro 70 Heavy Duty Precision Magnetic Pallet Chuck with Performance Pallet comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Magnetic pallet chuck for the MaxxMacro system.

MaxxDesign Exclusive Features:

• Magnetic pallet actuated by Allen wrench
• Comes complete with MaxxMacro 70 Performance Pallet

Product Information:

MaxxMacro 70 Heavy Duty Precision Magnetic Pallet Chuck with Performance Pallet is constructed from hardened 420C stainless steel (48–52 HRC) and provides a rugged, high-precision solution for clamping. The unit measures 170 × 95 × 60 mm (6.7" × 3.74") and is Allen wrench actuated. Lifting handles are included for easy handling.Clamping force: 100 N/cm². If you intend to use it in Wire EDM, please understand that while it withstands oil exposure, prolonged water contact in WEDM may cause rust. Users are advised to avoid water conditions when possible. Regular grinding maintenance is recommended to address wear during usage and optimize performance.

MaxxMacro 54 Stainless Slotted Electrode Holder U25 Performance comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Holder for flat electrodes, designed for use with saw cut or milled blanks.

MaxxDesign Exclusive Features:

• Fully assembled on a MaxxMacro Pallet 54 Performance Rust Proof Pallet
• 100% cross-compatible with OEM system

Product Information:

The MaxxMacro 54 Stainless Slotted Electrode Holder is fully compatible with System 3R Macro OEM holders. It comes fully assembled and ready to run, with four set screws to secure the electrode. It is mounted on our precision-cast plated stainless MaxxMacro Pallet 54 Performance Rust Proof Pallet—ready to run right out of the box. Ideal for holding saw-cut or milled blanks with reliability and repeatability.

MaxxMacro 54 to Maxx-ER Rapid-action Pneumatic Chuck 007625 System Adapter comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Pneumatic adapter for easy transition from MaxxMacro to Maxx-ER.

MaxxDesign Exclusive Features:

• Includes Pneumatic Rapid Action Chuck
• 100% cross-compatible with System 3R and Erowa ITS systems

Product Information:

MaxxMacro 54 to Maxx-ER Rapid-action Pneumatic Chuck 007625 Adapter is 100% cross compatible with Erowa Rapid Action Pnuematic EDM Chuck ER-007625 and with System 3R Macro system.

MaxxMacro 54 Stainless Pocket Electrode Holder S25 Performance comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

MaxxMacro 54 Stainless Pocket Electrode Holder S25 Automated Changing is 100% cross compatible with System 3R 3R-658.4E-S Square Pocket Electrode Holder. Works on all System 3R Macro Systems. Repeatability .002MM

• Repeatability .002MM
• Assembled in our MaxxMacro Pallet 54 Performance Rust Proof Pallet
• Includes 2 Stainless Set Screws
• Includes proper chip pocket position for automated robotic loading

Product Details:

MaxxMacro 70 Twin Manual Angle Adapter 90 Degree Adapter Rust Proof WEDM comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. For horizontal mounting of MaxxMacro holders. Rust resistant.

MaxxDesign Exclusive Features:

• Includes two MaxxMacro Manual Chucks, full rust-proof construction for Wire EDM environments.
• Positional accuracy to data. 004mm

Product Information:

MaxxMacro 70 Twin Manual Angle Adapter 90 Degree Adapter allows user to quickly go from vertical to horizontal position while maintaining location and accuracy. Rounded corners allowing closer access to burn locations without the worry of corners tagging.

MaxxMacro 70 WEDM Horizontal Pneumatic Chuck RSM 600143 comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Horizontal pneumatic chuck for permanent mounting on the machine table.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

MaxxMacro 239445 Double Side MXRuler Ruler 445mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Double-sided rulers are available in various lengths (-XXX), to match different machines. The cross-section is matched to the length to ensure optimal stability. With these rulers, accessories can be clamped on both sides of the ruler.

MaxxDesign Exclusive Features:

• Double-sided design for flexible setups, with enhanced rigidity thanks to upgraded dimensions: 86 mm wide (up from 60 mm) and 36 mm high (up from 30 mm)
• Compatible with any reference element (requires MaxxMacro A2392 MXRuler WEDM Sliding 86mm Clamps)

Product Information:

The MaxxMacro MXRuler is the most versatile setup for your Wire EDM machine. It is available in various lengths (-XXX) to match different machine sizes, with each length paired with a specifically designed cross-section to ensure optimal stability and performance. The MXRuler is compatible with a wide range of accessories, allowing for quick and easy mounting of workpieces of various sizes and shapes.

The MaxxMacro MXRuler includes the following items:

• 1 MaxxMacro Double MXRuler
• 2 MaxxMacro Ruler Eccentric Endstop (MM-RUACR214)
• 2 pieces of MaxxMacro MXRuler A239 WEDM Clamps non-rail (MM-RUACA103)
• 4 pieces of MaxxMacro MXRuler 23922 WEDM Stepped Support Tab (MM-RUACR203)
• 4 pieces of MaxxMacro MXRuler 23925 WEDM Standard 60mm Support Tab (MM-RUACR201)
• 4 pieces of MaxxMacro MXRuler 239241 WEDM Basic Toe Clamps (MM-RUACR205)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Mitsubishi MP1200
• Mitsubishi MV1200R
• Mitsubishi MD Pro 3
• Mitsubishi NA12
• Mitsubishi NA1200
• Mitsubishi NA1200P
• Mitsubishi MV1200S
• Charmilles RoboFil 330
  
• Excetek V400G
  
• Fanuc alpha C400iB
• Fanuc alpha C400iC
  
• Sodick AL400G
• Sodick AL400P
• Sodick ALC400G
• Sodick ALN400G
• Sodick ALN400Q
• Sodick VL400Q
• Sodick AG400L
• Sodick AQ400L
• Sodick SL400G
• Sodick SL400Q
• Sodick SLC400G

Vertical setup:

• Fanuc alpha 1iD
• Fanuc alpha 1iDP
• Fanuc alpha 1iE
• Fanuc alpha C600iA
• Fanuc alpha C600iB
• Fanuc alpha C600iC
• Mitsubishi BA24
• Mitsubishi NA24
• Mitsubishi NA2400
• Mitsubishi NA2400P
• Mitsubishi MP2400
• Mitsubishi MV2400R / R Z+
• Mitsubishi MV2400S Z+
  
• Makino DUO64
• Makino SP64 (yr 2005-)

MaxxMacro 70 Pneumatic Chuck 600863 Machine-Adapted WEDM comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Pneumatic chuck for permanent mounting in the machine spindle.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

The MaxxMacro Chuck 600863 Pneumatic Machine-Adapted Chuck is 100% cross-compatible with the System 3R 3R-600.86-30 Pneumatic Chuck. It is rust-proof, corrosion-resistant, and features fixed index positions at 4x90º.

MaxxMacro 239645 Double side MXRuler Ruler 645mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Double-sided rulers are available in various lengths (-XXX), to match different machines. The cross-section is matched to the length to ensure optimal stability. With these rulers, accessories can be clamped on both sides of the ruler.

MaxxDesign Exclusive Features:

• Double-sided design for flexible setups, with enhanced rigidity thanks to upgraded dimensions: 86 mm wide (up from 60 mm) and 36 mm high (up from 30 mm)
• Compatible with any reference element (requires MaxxMacro A2392 MXRuler WEDM Sliding 86mm Clamps)

Product Information:

The MaxxMacro MXRuler is the most versatile setup for your Wire EDM machine. It is available in various lengths (-XXX) to match different machine sizes, with each length paired with a specifically designed cross-section to ensure optimal stability and performance. The MXRuler is compatible with a wide range of accessories, allowing for quick and easy mounting of workpieces of various sizes and shapes.

The MaxxMacro MXRuler includes the following items:

• 1 MaxxMacro Double MXRuler
• 2 MaxxMacro Ruler Eccentric Endstop (MM-RUACR214)
• 2 pieces of MaxxMacro MXRuler A239 WEDM Clamps non-rail (MM-RUACA103)
• 6 pieces of MaxxMacro MXRuler 23922 WEDM Stepped Support Tab (MM-RUACR203)
• 4 pieces of MaxxMacro MXRuler 23925 WEDM Standard 60mm Support Tab (MM-RUACR201)
• 6 pieces of MaxxMacro MXRuler 239241 WEDM Basic Toe Clamps (MM-RUACR205)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Fanuc alpha C600iA
  
• Fanuc alpha C600iB
  
• Fanuc alpha C600iC
  
• Fanuc alpha 1iD
  
• Fanuc alpha 1iDP
  
• Fanuc alpha 1iE
  
• Mitsubishi MP2400
  
• Mitsubishi MV2400R / R Z+
  
• Mitsubishi MV2400S
  
• Mitsubishi MV2400S Z+
  
• Mitsubishi BA24
  
• Mitsubishi NA24
  
• Mitsubishi NA2400
  
• Mitsubishi NA2400P
  
• Mitsubishi PX05
  
• Sodick AL600G
  
• Sodick ALC600G
  
• Sodick ALN600G
  
• Sodick ALN600Q
  
• Sodick VL600Q
  
• Sodick AG600L
  
• Sodick AQ600L
• Sodick AQ600
  
• Sodick SL600G
  
• Sodick SL600P
  
• Sodick SL600Q
  
• Sodick SLC600G
  
• YCM Impuls 6

Vertical setup:

• Fanuc alpha C800iB
  
• Mitsubishi MV4800R
  
• Mitsubishi MV4800S

MaxxMagnum 2936HP SuperVise WEDM Vise comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Vice for clamping round workpieces Ø15-155 mm.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

MaxxMacro 2936HP WEDM Magnum SuperVise is 100% cross compatible with System 3R. This makes it easy to perform compound machining operations quickly and accurately. Plus, it enables seamless integration of machining operations with other systems and parts. MaxxMacro 2936HP WEDM Magnum SuperVise for clamping round workpieces 15-155 mm. Mounts on HP, Magnum or MacroTwin levelling adapter. Recommended maximum workpiece weight 12 kg

MaxxMacro 2942 Vise WEDM Vise comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. For clamping workpieces up to 50 mm.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

MaxxMacro 2942 WEDM Vise can be integrated with the MXRuler system, via the MX-239XXX ruler, or mounted onto a 54x54 MaxxMacro pallet. MaxxMacro 2942 WEDM Vise is fully compatible with System 3R system and can be mounted on 3R-237.2, 3R-292.66HP, 3R-294, a ruler in the 3Ruler system or System 3R Macro pallet 54x54.

MaxxMacro 6222 Manual WEDM Chuck comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Chuck adapter for MaxxMacro holders in the WEDM system.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

MaxxMacro 6222 WEDM Manual Chuck adapter for MaxxMacro holders in the WEDM system. Fully compatible with System 3R system and 3Ruler ruler system. Fixed index positions 4x90º

MaxxTooling Stainless ER32 Collet Replacement Locking Nut Rust Proof can be used to complement products and product lines for various systems, such as MaxxMacro, Maxx-ER, and OEM manufacturers like System 3R and Erowa. Locking Nut for MaxxMacro collet chucks. Chrome finish, rust-proof. Fits all MaxxMacro ER32 chucks.

MaxxDesign Exclusive Features:

• Rust-proof chrome finish for long-term corrosion resistance
• Compatible with all MaxxMacro and Maxx-ER ER32 collet chucks

Product Information:

The MaxxTooling Stainless ER32 Collet Replacement Locking Nut Rust Proof is a high-quality replacement nut designed to ensure secure and accurate performance of your MaxxMacro and Maxx-ER ER32 collet chucks. Engineered for durability, this locking nut features a rust-proof, corrosion-resistant chrome finish and is fully compatible with all MaxxMacro ER32 collet chuck systems.

Made from high-strength 4CR13 SUS stainless steel, it delivers long-lasting reliability even in demanding machining environments.

MaxxMacro 2921 SuperVise WEDM Vise comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. For clamping rectangular workpieces up to 77 mm.

MaxxDesign Exclusive Features:

• 100% cross-compatible with OEM system
• Mounts on Mounting Head, HP, Magnum or MacroTwin leveling adapter.

Product Information:

MaxxMacro 2921 WEDM SuperVise is 100% cross compatible with System 3R. This makes it easy to perform compound machining operations quickly and accurately. Plus, it enables seamless integration of machining operations with other systems and parts. MaxxMacro 2921 WEDM SuperVise for clamping rectangular workpieces up to 77 mm. Mounts on HP, Magnum or MacroTwin leveling adapter. Tightening torque 3 Nm.

MaxxMacro 2922 SuperVise WEDM Vise comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. For clamping rectangular workpieces up to 100 mm.

MaxxDesign Exclusive Features:

• 100% cross-compatible with OEM system
• Mounts on Mounting Head, HP, Magnum or MacroTwin leveling adapter.

Product Information:

MaxxMacro 2922 WEDM SuperVise is 100% cross compatible with System 3R. This makes it easy to perform compound machining operations quickly and accurately. Plus, it enables seamless integration of machining operations with other systems and parts. MaxxMacro 2922 WEDM SuperVise for clamping rectangular workpieces up to 100 mm. Tightening torque 3 Nm.

MaxxMacro 2923 SuperVise WEDM Accessory comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. For clamping rectangular workpieces up to 100 mm.

MaxxDesign Exclusive Features:

• 100% cross-compatible with OEM system
• Mounts on Mounting Head, HP, Magnum or MacroTwin leveling adapter.

Product Information:

MaxxMacro 2923 WEDM SuperVise is 100% cross compatible with System 3R. This makes it easy to perform compound machining operations quickly and accurately. Plus, it enables seamless integration of machining operations with other systems and parts. MaxxMacro 2923 WEDM SuperVise for clamping rectangular workpieces up to 100 mm. Mounts on HP, Magnum or MacroTwin leveling adapter. Tightening torque 7 Nm.

MaxxMacro 2923D Double SuperVise WEDM Vise comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. For collision-free clamping of both rectangular and round workpieces (14-45 mm and Ø3-15 mm respectively).

MaxxDesign Exclusive Features:

• 100% cross-compatible with OEM system
• Mounts on Mounting Head, HP, Magnum or MacroTwin leveling adapter.

Product Information:

MaxxMacro 2923D WEDM Double SuperVise is 100% cross compatible with System 3R. This makes it easy to perform compound machining operations quickly and accurately. Plus, it enables seamless integration of machining operations with other systems and parts. MaxxMacro 2923D WEDM Double SuperVise for collision-free clamping of both rectangular and round workpieces (14-45 mm and Ø 3-15 mm respectively). Total clamping range, 60 mm (to be split between two workpieces). Alternatively, dismount the double jaw and use as a regular MX-2923 (3R-292.3) vise for rectangular workpieces (0-100 mm). Tightening torque 7 Nm.

MaxxMacro 2923P Prism SuperVise WEDM Vise comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. For vertical or horizontal collision-free clamping of round workpieces (Ø3-15 mm).

MaxxDesign Exclusive Features:

• 100% cross-compatible with OEM system
• Mounts on Mounting Head, HP, Magnum or MacroTwin leveling adapter.

Product Information:

MaxxMacro 2923P WEDM Prism SuperVise is 100% cross compatible with System 3R. This makes it easy to perform compound machining operations quickly and accurately. Plus, it enables seamless integration of machining operations with other systems and parts. MaxxMacro 2923P WEDM Prism SuperVise for vertical or horizontal collision-free clamping of round workpieces (Ø 3-15 mm). Alternatively, rotate the movable jaw and use as a regular MX-2923 (3R-292.3) vise for rectangular workpieces (0-100 mm). Tightening torque 7 Nm.

MaxxMacro 2923S Universal WEDM Holder comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Holder for round workpieces up to 90 mm, or rectangular workpieces 100x90 mm.

MaxxDesign Exclusive Features:

• 100% cross-compatible with OEM system
• Mounts on Mounting Head, HP, Magnum or MacroTwin leveling adapter.

Product Information:

MaxxMacro 2923S WEDM Universal Holder is 100% cross compatible with System 3R. This makes it easy to perform compound machining operations quickly and accurately. Plus, it enables seamless integration of machining operations with other systems and parts. MaxxMacro 2923S WEDM Universal Holder for round workpieces up to 90 mm, or rectangular workpieces 100x90 mm. Tightening torque 4 Nm. Recommended maximum workpiece weight 7 kg

MaxxMacro 29292 SuperVise WEDM Vise comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. For collision-free clamping of workpieces with 30-degree dovetail connection.

MaxxDesign Exclusive Features:

• 100% cross-compatible with OEM system
• Mounts on Mounting Head, HP, Magnum or MacroTwin leveling adapter.

Product Information:

MaxxMacro 29292 WEDM SuperVise is 100% cross compatible with System 3R. This makes it easy to perform compound machining operations quickly and accurately. Plus, it enables seamless integration of machining operations with other systems and parts. MaxxMacro 29292 WEDM SuperVise intended specially for clamping tool blanks with 30-degree dovetail connection. Removable middle jaw allows clamping of either one large or two smalls blanks. Recommended maximum weight 7 kg. Tightening torque 7 Nm.

MaxxMacro 70 Pneumatic Chuck 60281 Internal Repair Kit Rust Proof. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

Rust resistant internal replacement kit for MaxxMacro Chucks. Kit includes stainless springs, stainless bearings and o'rings. For chucks: MM-PKLPR000 (MX-60281) MM-PKLPR000D (MX-60281-ID) MM-PKMPR001 MM-PL70R000 (MX-602101)

MaxxMacro 54 Variable Angled ER Collet Chuck ER16 comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. To handle a wide range of tooling and workpiece types, angles can be set continuously from 0° to 90°.

MaxxDesign Exclusive Features:

• Chuck includes our MaxxMacro 54 440C performance pallet.
• Compatible with standard ER collet sizes

Product Information:

The MaxxMacro 54 Variable Angled Collet Chuck ER16 is fully cross compatible with System 3R Macro Systems and designed for superior stability and durability. Featuring an optimized angular collet locking shape, it ensures enhanced grip and longer service life while accommodating a wide range of tooling and workpieces. The chuck’s angle can be continuously adjusted from 0° to 90°, making it ideal for machining complex components and accessing hard-to-reach areas such as drops and gates with pinpoint accuracy.

MaxxMacro 54 Stainless Round Stock Holder .125" comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Holder for round electrodes.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

The MaxxMacro 54 Round Stock Stainless Electrode Holder features a pocket with a tight tolerance of +0 / -0.001" and a depth of 0.625". The workpiece is securely held by a stainless steel set screw. Fully compatible with System 3R Macro tooling, this precision-machined holder delivers repeatability within 0.002 mm. It comes fully assembled on a plated MaxxMacro 54 Stainless Cast Pallet, ready for immediate use.

MaxxMacro 2933 SuperVise WEDM Vise comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Vice for clamping round workpieces Ø8-90 mm.

MaxxDesign Exclusive Features:

• 100% cross-compatible with OEM system
• Mounts on Mounting Head, HP, Magnum or MacroTwin leveling adapter.

Product Information:

MaxxMacro 2933 WEDM SuperVise is 100% cross compatible with System 3R. This makes it easy to perform compound machining operations quickly and accurately. Plus, it enables seamless integration of machining operations with other systems and parts. MaxxMacro 2933 WEDM SuperVise for clamping round workpieces 8-90 mm. Recommended maximum workpiece weight 7 kg. Tightening torque 8 Nm.

MaxxMacro 2665 Fixed mounting head WEDM Accessory comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. For mounting SuperVice, a holder or a fixture in the MaxxMacro system.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

The MaxxMacro 2665 Fixed mounting head WEDM makes it easy to quickly swap in and out different holders and fixtures for maximum efficiency. Recommended maximum load 15 kg. Adapted to automatic changing (with 3R-WP1).

MaxxMacro 54 Stainless Slotted Electrode Holder 1.0" comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

MaxxMacro 54 Stainless Slotted Electrode Holder 1.0" (-0 + .001) is 100% cross compatible with System 3R 3R-658.2E-S Slotted Electrode Holder. Works on all System 3R Macro Systems.

Repeatability .002MM

MaxxMacro 54 Stainless Slotted Electrode Holders are assembled with Stainless screws and our MaxxMacro 54 Stainless Cast Pallet Plated

Includes 4 Stainless Set Screws

Includes proper chip pocket position for automated robotic loading

Product Details:

MaxxMacro 2015 Angle shelf MXRuler Accessory WEDM comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Mounts directly on the machine table. For vertical mounting of a MaxxMacro chuck or short reference element in the machine.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

MaxxMacro 2015 MXRuler WEDM Angle shelf mounts directly on the machine table. For vertical mounting of a Macro chuck or short reference element in the machine. Its design ensures maximum stability for precise and reliable accuracy. Enjoying the ease of installation without the need for further attachments.

MaxxTooling V-Block Holder Vise Clamping shackle 40mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Spare clamping shackle for V-Block holder.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

Spare Clamping shackle for Maxx-ER V-block Holder 016691 Unoset and MaxxMacro 54 HP Vblock WEDM V-block Holder for parts up to ⌀40mm.

MaxxMacro 54 Stainless V-Block Holder Vise 8458 comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Clamping from outside, precision machined electrodes or small workpieces.

MaxxDesign Exclusive Features:

• Constructed of 440C Stainless for max hardness and rust resistance.
• Prism ground bearing surfaces 10 mm +/– 0.005 mm from the center.

Product Information:

MaxxMacro 54 Stainless V-Block Holder Vise 8458 offers perfect interchangeability, delivering exceptional accuracy and precision for your machining operations. Designed for external clamping of precision-machined electrodes or small workpieces, this vise ensures secure and consistent holds, enabling highly accurate machining—even on the smallest components. The prism-ground bearing surfaces are precisely located 10 mm ± 0.005 mm from center, ensuring accurate centering for critical measurements and repeatable performance.

MaxxMacro 70 Multi 5 Pneumatic Chuck 6001030 Precision Rail comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Precision rail with multiple chucks for easier installation and a more space-saving setup.

MaxxDesign Exclusive Features:

• Multi-Chuck Rail System allows simultaneous actuation.
• Air Clean function of Z pads

Product Information:

The MaxxMacro 70 Multi 5 Pneumatic Chuck 6001030 Precision Rail delivers high-performance precision and accuracy for diverse machining applications. It is 100% cross-compatible with System 3R Macro, allowing seamless integration into existing setups. At its core is the Pneumatic 6001030 Chuck, equipped with an Air Clean function to keep the chucks free of dust and debris, ensuring a cleaner and more efficient machining process. The chucks operate as a synchronized system for consistent, reliable performance, while also offering customization options to suit various project requirements. Ideal for both small and large-scale machining, the MaxxMacro 70 Multi Chuck Rail System provides the precision, reliability, and flexibility manufacturers need to achieve exceptional results every time.

MaxxMacro 70 Aluminum Low Profile Manual Chuck Extension 12" comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Vertical extension with manual chuck.

MaxxDesign Exclusive Features:

• Precision ground to ensure uniform height. This guarantees that when using multiple extensions, they all have the same height.
• Height accuracy is 0.008 mm (0.0003"), and XY accuracy is 0.002 mm.

MaxxMacro 239251 Standard Support Tab MXRuler Accessory WEDM (Set of 2) comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Support tab for MXruler.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

MaxxMacro MXRuler 239251 WEDM Standard Support Tab (Set of 2) for positioning workpieces on machine zero line +5mm. This tab enables precise, accurate, and reliable positioning of workpieces, drastically reducing the time required for quality assurance in production processes. Recommended maximum workpiece weight per tap 50 kg.

MaxxMacro 239241 Basic Toe Clamps MXRuler Accessory WEDM (Set of 2) comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Basic clamps for MXRuler, designed for use with tabs.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

The MaxxMacro 239241 MXRuler Basic WEDM Clamps work to secure workpieces onto the MXRuler with MaxxMacro's Zero-line support tab. MaxxMacro 239241 MXRuler Basic WEDM Clamps is 100% cross compatible with System 3R ruler These clamps are precision engineered and tested for accurate tool positioning, enabling repeatable and reliable machining results. M6 thread.

MaxxMacro 70 Pneumatic Chuck 6001030 with Universal Mounting Plate comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Pneumatic chuck for permanent mounting on the machine table with universal mounting plate.

MaxxDesign Exclusive Features:

• Universal mounting base ideal for 5th axis or B axis motors.
• Z-Pads Air Clean function.

MaxxMacro 54 Manual Chuck 60023 QuickChuck Repair Kit Rust Proof. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• High quality materials.
• Internal Repair kit

Product Information:

Includes: Locking Ring 4 Bearings 2 Springs 4 Retainer set screw

MaxxMacro 54 Manual Angle Adapter 90 Degree Rust Proof WEDM comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Rust-resistant 90-degree manual chuck, designed for mounting on a 54 WEDM chuck and positioned just above the zero line.

MaxxDesign Exclusive Features:

• Includes a MaxxMacro 54 Performance Pallet
• Allows for mounting Macro fixtures just above the zero line of Wire EDM machines.

Product Information:

MaxxMacro 54 Manual Angle Adapter 90 Degree Rust Proof WEDM is specifically designed for mounting MaxxMacro holders at a 90º angle in the MaxxMacro system, just above the zero line of Wire EDM machines. This setup helps avoid collisions while maximizing available space.

MaxxMacro 54 Aluminum Slotted Electrode Holder U15x4" comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Holder for flat electrodes, designed for use with saw cut or milled blanks.

MaxxDesign Exclusive Features:

• Fully assembled on a MaxxMacro 54 Stainless Performance Pallet
• Ideal for ribs and long electrodes with 4" of clamping area for a stable burn.

Product Information:

The MaxxMacro 54 Aluminum x 4" Slotted Electrode Holder is fully compatible with System 3R Macro holders. It includes six set screws and comes fully assembled on a MaxxMacro 54 Performance Pallet—mounted and ready to run. Designed for saw-cut or milled blanks, it's ideal for ribs and long electrodes. The 4-inch mounting area ensures a rigid setup for consistent, high-quality burns. This model is stocked exclusively in aluminum to reduce weight and avoid load issues seen with stainless or brass versions.

MaxxTooling Stainless ER40 Collet Replacement Locking Nut can be used to complement products and product lines for various systems, such as MaxxMacro, Maxx-ER, and OEM manufacturers like System 3R and Erowa.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

MaxxMacro 54 ER40 Collet Chuck Locking Nut replacement nut for MaxxMacro Collet Chuck, ensuring secure and accurate operation. This nut works on all MaxxMacro, Maxx-ER - ER40 Collet chucks.

MaxxMacro 54 Aluminum Slotted Electrode Holder U15x6" comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Holder for flat electrodes, designed for use with saw cut or milled blanks.

MaxxDesign Exclusive Features:

• Fully assembled on a MaxxMacro 54 Stainless Performance Pallet
• Ideal for ribs and long electrodes with 6" of clamping area for a stable burn.

Product Information:

The MaxxMacro 54 Aluminum x 6" Slotted Electrode Holder is fully compatible with System 3R Macro holders. It includes ten set screws and comes fully assembled on a MaxxMacro 54 Performance Pallet—mounted and ready to run. Designed for saw-cut or milled blanks, it's ideal for ribs and long electrodes. The 6-inch mounting area ensures a rigid setup for consistent, high-quality burns. This model is stocked exclusively in aluminum to reduce weight and avoid load issues seen with stainless or brass versions.

MaxxMacro 70 Pneumatic Table Chuck Performance comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Pneumatic chuck locked/opened with air gun.

MaxxDesign Exclusive Features:

• Vibration-damped chuck.
• Air-blast cleaning of the Z-references and turbo locking feature.

MaxxMacro 54 Aluminum Slotted Electrode Holder U20x4" comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Holder for flat electrodes, designed for use with saw cut or milled blanks.

MaxxDesign Exclusive Features:

• Fully assembled on a MaxxMacro 54 Stainless Performance Pallet
• Ideal for ribs and long electrodes with 4" of clamping area for a stable burn.

Product Information:

The MaxxMacro 54 Aluminum x 4" Slotted Electrode Holder is fully compatible with System 3R Macro holders. It includes six set screws and comes fully assembled on a MaxxMacro 54 Performance Pallet—mounted and ready to run. Designed for saw-cut or milled blanks, it's ideal for ribs and long electrodes. The 4-inch mounting area ensures a rigid setup for consistent, high-quality burns. This model is stocked exclusively in aluminum to reduce weight and avoid load issues seen with stainless or brass versions.

MaxxMacro 70 Pneumatic Low Profile Chuck Rust Proof WEDM Disable Index comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Pneumatic chuck for permanent mounting on the machine table with index-disable feature.

MaxxDesign Exclusive Features:

• Disable Index system.
• Full 440C stainless steel construction and rust-proof mechanism.

Product Information:

MaxxMacro Chuck 60281 is a low-profile pneumatic chuck engineered for permanent installation on machine tables in both Wire EDM and CNC machining environments. This chuck features a Disable Index system with a male-female interface that helps prevent contamination from chips and debris. An evacuation hole is located between the two pneumatic ports—always ensure the SSFP (sealing screw flat point) is securely installed to maintain proper sealing and prevent air pressure loss during operation.

MaxxMacro 54 Aluminum Slotted Electrode Holder U20x6" comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Holder for flat electrodes, designed for use with saw cut or milled blanks.

MaxxDesign Exclusive Features:

• Fully assembled on a MaxxMacro 54 Stainless Performance Pallet
• Ideal for ribs and long electrodes with 6" of clamping area for a stable burn.

Product Information:

The MaxxMacro 54 Aluminum x 6" Slotted Electrode Holder is fully compatible with System 3R Macro holders. It includes ten set screws and comes fully assembled on a MaxxMacro 54 Performance Pallet—mounted and ready to run. Designed for saw-cut or milled blanks, it's ideal for ribs and long electrodes. The 6-inch mounting area ensures a rigid setup for consistent, high-quality burns. This model is stocked exclusively in aluminum to reduce weight and avoid load issues seen with stainless or brass versions.

MaxxMacro 70 Multi 3 Pneumatic Chuck 6001030 Precision Rail comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Precision rail with multiple chucks for easier installation and a more space-saving setup.

MaxxDesign Exclusive Features:

• Multi-Chuck Rail System allows simultaneous actuation.
• Air Clean function of Z pads

Product Information:

The MaxxMacro 70 Multi 3 Pneumatic Chuck 6001030 Precision Rail delivers high-performance precision and accuracy for diverse machining applications. It is 100% cross-compatible with System 3R Macro, allowing seamless integration into existing setups. At its core is the Pneumatic 6001030 Chuck, equipped with an Air Clean function to keep the chucks free of dust and debris, ensuring a cleaner and more efficient machining process. The chucks operate as a synchronized system for consistent, reliable performance, while also offering customization options to suit various project requirements. Ideal for both small and large-scale machining, the MaxxMacro 70 Multi Chuck Rail System provides the precision, reliability, and flexibility manufacturers need to achieve exceptional results every time.

MaxxMacro 54 Aluminum Slotted Electrode Holder U30x4" comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Holder for flat electrodes, designed for use with saw cut or milled blanks.

MaxxDesign Exclusive Features:

• Fully assembled on a MaxxMacro 54 Stainless Performance Pallet
• Ideal for ribs and long electrodes with 4" of clamping area for a stable burn.

Product Information:

The MaxxMacro 54 Aluminum x 4" Slotted Electrode Holder is fully compatible with System 3R Macro holders. It includes six set screws and comes fully assembled on a MaxxMacro 54 Performance Pallet—mounted and ready to run. Designed for saw-cut or milled blanks, it's ideal for ribs and long electrodes. The 4-inch mounting area ensures a rigid setup for consistent, high-quality burns. This model is stocked exclusively in aluminum to reduce weight and avoid load issues seen with stainless or brass versions.

MaxxMacro 54 Aluminum Slotted Electrode Holder U30x6" comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Holder for flat electrodes, designed for use with saw cut or milled blanks.

MaxxDesign Exclusive Features:

• Fully assembled on a MaxxMacro 54 Stainless Performance Pallet
• Ideal for ribs and long electrodes with 6" of clamping area for a stable burn.

Product Information:

The MaxxMacro 54 Aluminum x 6" Slotted Electrode Holder is fully compatible with System 3R Macro holders. It includes ten set screws and comes fully assembled on a MaxxMacro 54 Performance Pallet—mounted and ready to run. Designed for saw-cut or milled blanks, it's ideal for ribs and long electrodes. The 6-inch mounting area ensures a rigid setup for consistent, high-quality burns. This model is stocked exclusively in aluminum to reduce weight and avoid load issues seen with stainless or brass versions.

MaxxMacro 70 Pneumatic Spindle Chuck 90957 80mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Pneumatic chuck for permanent mounting in the machine spindle.

MaxxDesign Exclusive Features:

• Designed for permanent mounting on the machine’s spindle.
• Includes Turbo clamping function.

Product Information:

The MaxxMacro 90957 Spindle Chuck is an automatic spindle chuck for the MaxxMacro system, 100% cross-compatible with the System 3R Macro tooling system. The chuck is designed for permanent mounting on the machine’s spindle. All connections are from the back of the chuck, including unclamp and Turbo. It features a hardened XY-reference, clamping with spring pressure and a “Turbo function,” and unclamping with air pressure.