MaxxMacro WEDM

System 3R compatible MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for machines with a frame table. With the aid of MXRuler, rectangular or round workpieces, lightweight or heavy, large or small, are located on the machine zero line, without risk of collision. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• MXRuler's are available in various lengths to match different machines.
• High quality materials: Full rust proof design.
• Built-in height adjustment
• 86mm version: This is a more rigid design with upgraded width from 60mm to 86mm wide and a thicker height from 30mm to 36mm height
• Compatible with any reference element, choose the correct one according to your machine. If you opt for a reference element, also pick up the Sliding Clamps: System 3R compatible MaxxMacro A2392 MXRuler WEDM 86mm Clamps
• The MXRuler is compatible with multiple accessories, and the dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler 86mm
• x1 Eccentric Stop
• x1 Clamps Non-Rail (MX-A239)
• x3 Zero-line Support tab (MX-23922)
• x2 5mm Support tab (MX-23925)
• x3 Basic Clamps (MX-239241)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Excetek V850G
  
• Fanuc alpha C800iB
  
• Mitsubishi MV4800R
  
• Mitsubishi MV4800S
  
• Seibu MM80B
  

Product Details:

System 3R compatible MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for machines with a frame table. With the aid of MXRuler, rectangular or round workpieces, lightweight or heavy, large or small, are located on the machine zero line, without risk of collision. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• MXRuler's are available in various lengths to match different machines.
• High quality materials: Full rust proof design.
• Built-in height adjustment
• 86mm version: This is a more rigid design with upgraded width from 60mm to 86mm wide and a thicker height from 30mm to 36mm height
• Compatible with any reference element, choose the correct one according to your machine. If you opt for a reference element, also pick up the Sliding Clamps: System 3R compatible MaxxMacro A2392 MXRuler WEDM 86mm Clamps
• The MXRuler is compatible with multiple accessories, and the dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler 86mm
• x1 Eccentric Stop
• x1 Clamps Non-Rail (MX-A239)
• x3 Zero-line Support tab (MX-23922)
• x2 5mm Support tab (MX-23925)
• x3 Basic Clamps (MX-239241)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

Vertical setup:

Product Details:

System 3R compatible MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for machines with a frame table. With the aid of MXRuler, rectangular or round workpieces, lightweight or heavy, large or small, are located on the machine zero line, without risk of collision. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• MXRuler's are available in various lengths to match different machines.
• High quality materials: Full rust proof design.
• Built-in height adjustment
• 86mm version: This is a more rigid design with upgraded width from 60mm to 86mm wide and a thicker height from 30mm to 36mm height
• Compatible with any reference element, choose the correct one according to your machine. If you opt for a reference element, also pick up the Sliding Clamps: System 3R compatible MaxxMacro A2392 MXRuler WEDM 86mm Clamps
• The MXRuler is compatible with multiple accessories, and the dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler 86mm
• x1 Eccentric Stop
• x1 Clamps Non-Rail (MX-A239)
• x3 Zero-line Support tab (MX-23922)
• x2 5mm Support tab (MX-23925)
• x3 Basic Clamps (MX-239241)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• AgieCharmilles CUT 400 (yr 2012)
  
• AgieCharmilles CUT 400 Sp
  
• AgieCharmilles CUT P 800
  
• AgieCharmilles CUT P 800 L Flushing
• Charmilles RoboFil 640
  
• Makino U86 (L-shape)
  
• ONA AE600
  

Vertical setup:

• Sodick AQ1200L
  

Product Details:

System 3R compatible MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for machines with a frame table. With the aid of MXRuler, rectangular or round workpieces, lightweight or heavy, large or small, are located on the machine zero line, without risk of collision. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• MXRuler's are available in various lengths to match different machines.
• High quality materials: Full rust proof design.
• Built-in height adjustment
• 86mm version: This is a more rigid design with upgraded width from 60mm to 86mm wide and a thicker height from 30mm to 36mm height
• Compatible with any reference element, choose the correct one according to your machine. If you opt for a reference element, also pick up the Sliding Clamps: System 3R compatible MaxxMacro A2392 MXRuler WEDM 86mm Clamps
• The MXRuler is compatible with multiple accessories, and the dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler 86mm
• x1 Eccentric Stop
• x1 Clamps Non-Rail (MX-A239)
• x3 Zero-line Support tab (MX-23922)
• x2 5mm Support tab (MX-23925)
• x3 Basic Clamps (MX-239241)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• AgieCharmilles Progress VP4
• Agie Progress 4
  
• ONA AF60
  
• ONA AV60
  
• ONA AX6
  

Product Details:

System 3R compatible MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for machines with a frame table. With the aid of MXRuler, rectangular or round workpieces, lightweight or heavy, large or small, are located on the machine zero line, without risk of collision. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• MXRuler's are available in various lengths to match different machines.
• High quality materials: Full rust proof design.
• Built-in height adjustment
• 86mm version: This is a more rigid design with upgraded width from 60mm to 86mm wide and a thicker height from 30mm to 36mm height
• Compatible with any reference element, choose the correct one according to your machine. If you opt for a reference element, also pick up the Sliding Clamps: System 3R compatible MaxxMacro A2392 MXRuler WEDM 86mm Clamps
• The MXRuler is compatible with multiple accessories, and the dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler 86mm
• x1 Eccentric Stop
• x1 Clamps Non-Rail (MX-A239)
• x3 Zero-line Support tab (MX-23922)
• x2 5mm Support tab (MX-23925)
• x3 Basic Clamps (MX-239241)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Charmilles RoboFil 690
  
• Charmilles RoboFil 690cc
  

Vertical setup:

• AgieCharmilles CUT P 1250
  

Product Details:

System 3R compatible MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for machines with a frame table. With the aid of MXRuler, rectangular or round workpieces, lightweight or heavy, large or small, are located on the machine zero line, without risk of collision. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• MXRuler's are available in various lengths to match different machines.
• High quality materials: Full rust proof design.
• Built-in height adjustment
• 86mm version: This is a more rigid design with upgraded width from 60mm to 86mm wide and a thicker height from 30mm to 36mm height
• Compatible with any reference element, choose the correct one according to your machine. If you opt for a reference element, also pick up the Sliding Clamps: System 3R compatible MaxxMacro A2392 MXRuler WEDM 86mm Clamps
• The MXRuler is compatible with multiple accessories, and the dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler 86mm
• x1 Eccentric Stop
• x1 Clamps Non-Rail (MX-A239)
• x3 Zero-line Support tab (MX-23922)
• x2 5mm Support tab (MX-23925)
• x3 Basic Clamps (MX-239241)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Sodick AQ900L
  

Product Details:

System 3R compatible MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for machines with a frame table. With the aid of MXRuler, rectangular or round workpieces, lightweight or heavy, large or small, are located on the machine zero line, without risk of collision. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• MXRuler's are available in various lengths to match different machines.
• High quality materials: Full rust proof design.
• Built-in height adjustment
• 86mm version: This is a more rigid design with upgraded width from 60mm to 86mm wide and a thicker height from 30mm to 36mm height
• Compatible with any reference element, choose the correct one according to your machine. If you opt for a reference element, also pick up the Sliding Clamps: System 3R compatible MaxxMacro A2392 MXRuler WEDM 86mm Clamps
• The MXRuler is compatible with multiple accessories, and the dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler 86mm
• x1 Eccentric Stop
• x1 Clamps Non-Rail (MX-A239)
• x3 Zero-line Support tab (MX-23922)
• x2 5mm Support tab (MX-23925)
• x3 Basic Clamps (MX-239241)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

Product Details:

System 3R compatible MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for machines with a frame table. With the aid of MXRuler, rectangular or round workpieces, lightweight or heavy, large or small, are located on the machine zero line, without risk of collision. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• MXRuler's are available in various lengths to match different machines.
• High quality materials: Full rust proof design.
• Built-in height adjustment
• 86mm version: This is a more rigid design with upgraded width from 60mm to 86mm wide and a thicker height from 30mm to 36mm height
• Compatible with any reference element, choose the correct one according to your machine. If you opt for a reference element, also pick up the Sliding Clamps: System 3R compatible MaxxMacro A2392 MXRuler WEDM 86mm Clamps
• The MXRuler is compatible with multiple accessories, and the dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler 86mm
• x1 Eccentric Stop
• x1 Clamps Non-Rail (MX-A239)
• x3 Zero-line Support tab (MX-23922)
• x2 5mm Support tab (MX-23925)
• x3 Basic Clamps (MX-239241)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• AgieCharmilles CUT 3000 / S / X (yr 2011-)
• AgieCharmilles CUT X 500
  
• Agie Challenge 3
  
• Agie Classic 3
  
• Agie Evolution 3
  
• Agie Excellence 3
  
• Agie Progress 3
  
• AgieCharmilles Progress VP3 (yr2014-2021)
  
• Agiecut Size 3
  

Product Details:

System 3R compatible MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for machines with a frame table. With the aid of MXRuler, rectangular or round workpieces, lightweight or heavy, large or small, are located on the machine zero line, without risk of collision. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• MXRuler's are available in various lengths to match different machines.
• High quality materials: Full rust proof design.
• Built-in height adjustment
• 86mm version: This is a more rigid design with upgraded width from 60mm to 86mm wide and a thicker height from 30mm to 36mm height
• Compatible with any reference element, choose the correct one according to your machine. If you opt for a reference element, also pick up the Sliding Clamps: System 3R compatible MaxxMacro A2392 MXRuler WEDM 86mm Clamps
• The MXRuler is compatible with multiple accessories, and the dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler 86mm
• x1 Eccentric Stop
• x1 Clamps Non-Rail (MX-A239)
• x3 Zero-line Support tab (MX-23922)
• x2 5mm Support tab (MX-23925)
• x3 Basic Clamps (MX-239241)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Sodick A750
  

Product Details:

System 3R compatible MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for machines with a frame table. With the aid of MXRuler, rectangular or round workpieces, lightweight or heavy, large or small, are located on the machine zero line, without risk of collision. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• MXRuler's are available in various lengths to match different machines.
• High quality materials: Full rust proof design.
• Built-in height adjustment
• 86mm version: This is a more rigid design with upgraded width from 60mm to 86mm wide and a thicker height from 30mm to 36mm height
• Compatible with any reference element, choose the correct one according to your machine. If you opt for a reference element, also pick up the Sliding Clamps: System 3R compatible MaxxMacro A2392 MXRuler WEDM 86mm Clamps
• The MXRuler is compatible with multiple accessories, and the dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler 86mm
• x1 Eccentric Stop
• x1 Clamps Non-Rail (MX-A239)
• x3 Zero-line Support tab (MX-23922)
• x2 5mm Support tab (MX-23925)
• x3 Basic Clamps (MX-239241)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Fanuc alpha 1iB
  
• Fanuc alpha 1iC
  
• Makino U53j
  
• Makino U53Tj
  
• Makino UP53j
  
• Makino UPV-5
  
• Makino W53FB
  
• Makino WB53B
  
• Sodick AQ535L (yr. 2001-)
  
• Sodick AQ535
• Sodick AQ550
  

Product Details:

System 3R compatible MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for machines with a frame table. With the aid of MXRuler, rectangular or round workpieces, lightweight or heavy, large or small, are located on the machine zero line, without risk of collision. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• MXRuler's are available in various lengths to match different machines.
• High quality materials: Full rust proof design.
• Built-in height adjustment
• 86mm version: This is a more rigid design with upgraded width from 60mm to 86mm wide and a thicker height from 30mm to 36mm height
• Compatible with any reference element, choose the correct one according to your machine. If you opt for a reference element, also pick up the Sliding Clamps: System 3R compatible MaxxMacro A2392 MXRuler WEDM 86mm Clamps
• The MXRuler is compatible with multiple accessories, and the dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler 86mm
• x1 Eccentric Stop
• x1 Clamps Non-Rail (MX-A239)
• x3 Zero-line Support tab (MX-23922)
• x2 5mm Support tab (MX-23925)
• x3 Basic Clamps (MX-239241)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Charmilles RoboFil 500
  Charmilles RoboFil 504
  Charmilles RoboFil 510
  

Product Details:

System 3R compatible MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for machines with a frame table. With the aid of MXRuler, rectangular or round workpieces, lightweight or heavy, large or small, are located on the machine zero line, without risk of collision. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• MXRuler's are available in various lengths to match different machines.
• High quality materials: Full rust proof design.
• Built-in height adjustment
• 86mm version: This is a more rigid design with upgraded width from 60mm to 86mm wide and a thicker height from 30mm to 36mm height
• Compatible with any reference element, choose the correct one according to your machine. If you opt for a reference element, also pick up the Sliding Clamps: System 3R compatible MaxxMacro A2392 MXRuler WEDM 86mm Clamps
• The MXRuler is compatible with multiple accessories, and the dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler 86mm
• x1 Eccentric Stop
• x1 Clamps Non-Rail (MX-A239)
• x3 Zero-line Support tab (MX-23922)
• x2 5mm Support tab (MX-23925)
• x3 Basic Clamps (MX-239241)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Sodick AQ560L
  
• Accutex 500I
  

Product Details:

System 3R compatible MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for machines with a frame table. With the aid of MXRuler, rectangular or round workpieces, lightweight or heavy, large or small, are located on the machine zero line, without risk of collision. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• MXRuler's are available in various lengths to match different machines.
• High quality materials: Full rust proof design.
• Built-in height adjustment
• 86mm version: This is a more rigid design with upgraded width from 60mm to 86mm wide and a thicker height from 30mm to 36mm height
• Compatible with any reference element, choose the correct one according to your machine. If you opt for a reference element, also pick up the Sliding Clamps: System 3R compatible MaxxMacro A2392 MXRuler WEDM 86mm Clamps
• The MXRuler is compatible with multiple accessories, and the dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler 86mm
• x1 Eccentric Stop
• x1 Clamps Non-Rail (MX-A239)
• x3 Zero-line Support tab (MX-23922)
• x2 5mm Support tab (MX-23925)
• x3 Basic Clamps (MX-239241)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• AgieCharmilles CUT 300 (yr 2012-)
  
• AgieCharmilles CUT 300 mS / Sp
  
• AgieCharmilles CUT P 550
  
• Charmilles RoboFil 430
  
• Charmilles RoboFil 440
  
• Sodick AQ537L
  
• Sodick A535
  
• Sodick AQ535
  

Vertical setup:

• AgieCharmilles CUT 400 (yr 2012-)
  
• AgieCharmilles CUT 400 Sp
  
• AgieCharmilles CUT P 800
  
• AgieCharmilles CUT P 800 L Flushing
  

Product Details:

System 3R compatible MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for machines with a frame table. With the aid of MXRuler, rectangular or round workpieces, lightweight or heavy, large or small, are located on the machine zero line, without risk of collision. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• MXRuler's are available in various lengths to match different machines.
• High quality materials: Full rust proof design.
• Built-in height adjustment
• 86mm version: This is a more rigid design with upgraded width from 60mm to 86mm wide and a thicker height from 30mm to 36mm height
• Compatible with any reference element, choose the correct one according to your machine. If you opt for a reference element, also pick up the Sliding Clamps: System 3R compatible MaxxMacro A2392 MXRuler WEDM 86mm Clamps
• The MXRuler is compatible with multiple accessories, and the dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler 86mm
• x1 Eccentric Stop
• x1 Clamps Non-Rail (MX-A239)
• x3 Zero-line Support tab (MX-23922)
• x2 5mm Support tab (MX-23925)
• x3 Basic Clamps (MX-239241)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• GFAC Cut 300 CT 430/440-Dovetails Left/Right
  

Product Details:

System 3R compatible MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for machines with a frame table. With the aid of MXRuler, rectangular or round workpieces, lightweight or heavy, large or small, are located on the machine zero line, without risk of collision. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• MXRuler's are available in various lengths to match different machines.
• High quality materials: Full rust proof design.
• Built-in height adjustment
• 86mm version: This is a more rigid design with upgraded width from 60mm to 86mm wide and a thicker height from 30mm to 36mm height
• Compatible with any reference element, choose the correct one according to your machine. If you opt for a reference element, also pick up the Sliding Clamps: System 3R compatible MaxxMacro A2392 MXRuler WEDM 86mm Clamps
• The MXRuler is compatible with multiple accessories, and the dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler 86mm
• x1 Eccentric Stop
• x1 Clamps Non-Rail (MX-A239)
• x3 Zero-line Support tab (MX-23922)
• x2 5mm Support tab (MX-23925)
• x3 Basic Clamps (MX-239241)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

Vertical setup:

Product Details:

System 3R compatible MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for machines with a frame table. With the aid of MXRuler, rectangular or round workpieces, lightweight or heavy, large or small, are located on the machine zero line, without risk of collision. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• MXRuler's are available in various lengths to match different machines.
• High quality materials: Full rust proof design.
• Built-in height adjustment
• 86mm version: This is a more rigid design with upgraded width from 60mm to 86mm wide and a thicker height from 30mm to 36mm height
• Compatible with any reference element, choose the correct one according to your machine. If you opt for a reference element, also pick up the Sliding Clamps: System 3R compatible MaxxMacro A2392 MXRuler WEDM 86mm Clamps
• The MXRuler is compatible with multiple accessories, and the dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler 86mm
• x1 Eccentric Stop
• x1 Clamps Non-Rail (MX-A239)
• x3 Zero-line Support tab (MX-23922)
• x2 5mm Support tab (MX-23925)
• x3 Basic Clamps (MX-239241)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Fanuc alpha C600iA
  
• Fanuc alpha C600iB
  
• Fanuc alpha C600iC
  
• Fanuc alpha 1iD
  
• Fanuc alpha 1iDP
  
• Fanuc alpha 1iE
  
• Mitsubishi MP2400
  
• Mitsubishi MV2400R / R Z+
  
• Mitsubishi MV2400S
  
• Mitsubishi MV2400S Z+
  
• Mitsubishi BA24
  
• Mitsubishi NA24
  
• Mitsubishi NA2400
  
• Mitsubishi NA2400P
  
• Mitsubishi PX05
  
• Sodick AL600G
  
• Sodick ALC600G
  
• Sodick ALN600G
  
• Sodick ALN600Q
  
• Sodick VL600Q
  
• Sodick AG600L
  
• Sodick AQ600L
• Sodick AQ600
  
• Sodick SL600G
  
• Sodick SL600P
  
• Sodick SL600Q
  
• Sodick SLC600G
  

Vertical setup:

• Fanuc alpha C800iB
  
• Mitsubishi MV4800R
  
• Mitsubishi MV4800S
  

Product Details:

System 3R compatible MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for machines with a frame table. With the aid of MXRuler, rectangular or round workpieces, lightweight or heavy, large or small, are located on the machine zero line, without risk of collision. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• MXRuler's are available in various lengths to match different machines.
• High quality materials: Full rust proof design.
• Built-in height adjustment
• 86mm version: This is a more rigid design with upgraded width from 60mm to 86mm wide and a thicker height from 30mm to 36mm height
• Compatible with any reference element, choose the correct one according to your machine. If you opt for a reference element, also pick up the Sliding Clamps: System 3R compatible MaxxMacro A2392 MXRuler WEDM 86mm Clamps
• The MXRuler is compatible with multiple accessories, and the dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler 86mm
• x1 Eccentric Stop
• x1 Clamps Non-Rail (MX-A239)
• x3 Zero-line Support tab (MX-23922)
• x2 5mm Support tab (MX-23925)
• x3 Basic Clamps (MX-239241)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

Vertical setup:

Product Details:

System 3R compatible MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for machines with a frame table. With the aid of MXRuler, rectangular or round workpieces, lightweight or heavy, large or small, are located on the machine zero line, without risk of collision. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• MXRuler's are available in various lengths to match different machines.
• High quality materials: Full rust proof design.
• Built-in height adjustment
• 86mm version: This is a more rigid design with upgraded width from 60mm to 86mm wide and a thicker height from 30mm to 36mm height
• Compatible with any reference element, choose the correct one according to your machine. If you opt for a reference element, also pick up the Sliding Clamps: System 3R compatible MaxxMacro A2392 MXRuler WEDM 86mm Clamps
• The MXRuler is compatible with multiple accessories, and the dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler 86mm
• x1 Eccentric Stop
• x1 Clamps Non-Rail (MX-A239)
• x3 Zero-line Support tab (MX-23922)
• x2 5mm Support tab (MX-23925)
• x3 Basic Clamps (MX-239241)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• ONA AV35
  
• Sodick A600W
  
• Chmer 643S
  

Vertical setup:

• ONA AE600
  

Product Details:

System 3R compatible MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for machines with a frame table. With the aid of MXRuler, rectangular or round workpieces, lightweight or heavy, large or small, are located on the machine zero line, without risk of collision. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• MXRuler's are available in various lengths to match different machines.
• High quality materials: Full rust proof design.
• Built-in height adjustment
• 86mm version: This is a more rigid design with upgraded width from 60mm to 86mm wide and a thicker height from 30mm to 36mm height
• Compatible with any reference element, choose the correct one according to your machine. If you opt for a reference element, also pick up the Sliding Clamps: System 3R compatible MaxxMacro A2392 MXRuler WEDM 86mm Clamps
• The MXRuler is compatible with multiple accessories, and the dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler 86mm
• x1 Eccentric Stop
• x1 Clamps Non-Rail (MX-A239)
• x3 Zero-line Support tab (MX-23922)
• x2 5mm Support tab (MX-23925)
• x3 Basic Clamps (MX-239241)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• AgieCharmilles CUT 30P (yr 2012-)
  
• AgieCharmilles CUT C 600
  
• AgieCharmilles CUT E 600
  
• ONA AF35
  
• ONA AE400
  
• ONA AX4
  

Product Details:

System 3R compatible MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for machines with a frame table. With the aid of MXRuler, rectangular or round workpieces, lightweight or heavy, large or small, are located on the machine zero line, without risk of collision. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• MXRuler's are available in various lengths to match different machines.
• High quality materials: Full rust proof design.
• Built-in height adjustment
• 86mm version: This is a more rigid design with upgraded width from 60mm to 86mm wide and a thicker height from 30mm to 36mm height
• Compatible with any reference element, choose the correct one according to your machine. If you opt for a reference element, also pick up the Sliding Clamps: System 3R compatible MaxxMacro A2392 MXRuler WEDM 86mm Clamps
• The MXRuler is compatible with multiple accessories, and the dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler 86mm
• x1 Eccentric Stop
• x1 Clamps Non-Rail (MX-A239)
• x3 Zero-line Support tab (MX-23922)
• x2 5mm Support tab (MX-23925)
• x3 Basic Clamps (MX-239241)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Charmilles RoboFil 6040
  
• Charmilles RoboFil 6050
  
• Excetek V650G
  
• Makino PX36
  
• Makino U6 H.E.A.T. (Square)
  
• Makino U6 (U-shape)
  
• Makino U6i (Square)
  
• Makino UP6
  
• Makino DUO64
  

Product Details:

System 3R compatible MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for machines with a frame table. With the aid of MXRuler, rectangular or round workpieces, lightweight or heavy, large or small, are located on the machine zero line, without risk of collision. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• MXRuler's are available in various lengths to match different machines.
• High quality materials: Full rust proof design.
• Built-in height adjustment
• 86mm version: This is a more rigid design with upgraded width from 60mm to 86mm wide and a thicker height from 30mm to 36mm height
• Compatible with any reference element, choose the correct one according to your machine. If you opt for a reference element, also pick up the Sliding Clamps: System 3R compatible MaxxMacro A2392 MXRuler WEDM 86mm Clamps
• The MXRuler is compatible with multiple accessories, and the dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler 86mm
• x1 Eccentric Stop
• x1 Clamps Non-Rail (MX-A239)
• x3 Zero-line Support tab (MX-23922)
• x2 5mm Support tab (MX-23925)
• x3 Basic Clamps (MX-239241)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Makino SP64
  

Product Details:

System 3R compatible MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for machines with a frame table. With the aid of MXRuler, rectangular or round workpieces, lightweight or heavy, large or small, are located on the machine zero line, without risk of collision. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• MXRuler's are available in various lengths to match different machines.
• High quality materials: Full rust proof design.
• Built-in height adjustment
• 86mm version: This is a more rigid design with upgraded width from 60mm to 86mm wide and a thicker height from 30mm to 36mm height
• Compatible with any reference element, choose the correct one according to your machine. If you opt for a reference element, also pick up the Sliding Clamps: System 3R compatible MaxxMacro A2392 MXRuler WEDM 86mm Clamps
• The MXRuler is compatible with multiple accessories, and the dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler 86mm
• x1 Eccentric Stop
• x1 Clamps Non-Rail (MX-A239)
• x3 Zero-line Support tab (MX-23922)
• x2 5mm Support tab (MX-23925)
• x3 Basic Clamps (MX-239241)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Vertical setup:

• Charmilles RoboFil 640
  
• Charmilles RoboFil 690
  
• Charmilles RoboFil 690cc
  

Product Details:

System 3R compatible MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for machines with a frame table. With the aid of MXRuler, rectangular or round workpieces, lightweight or heavy, large or small, are located on the machine zero line, without risk of collision. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• MXRuler's are available in various lengths to match different machines.
• High quality materials: Full rust proof design.
• Built-in height adjustment
• 86mm version: This is a more rigid design with upgraded width from 60mm to 86mm wide and a thicker height from 30mm to 36mm height
• Compatible with any reference element, choose the correct one according to your machine. If you opt for a reference element, also pick up the Sliding Clamps: System 3R compatible MaxxMacro A2392 MXRuler WEDM 86mm Clamps
• The MXRuler is compatible with multiple accessories, and the dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler 86mm
• x1 Eccentric Stop
• x1 Clamps Non-Rail (MX-A239)
• x3 Zero-line Support tab (MX-23922)
• x2 5mm Support tab (MX-23925)
• x3 Basic Clamps (MX-239241)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Makino EU64
  

Product Details:

System 3R compatible MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for machines with a frame table. With the aid of MXRuler, rectangular or round workpieces, lightweight or heavy, large or small, are located on the machine zero line, without risk of collision. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• MXRuler's are available in various lengths to match different machines.
• High quality materials: Full rust proof design.
• Built-in height adjustment
• 86mm version: This is a more rigid design with upgraded width from 60mm to 86mm wide and a thicker height from 30mm to 36mm height
• Compatible with any reference element, choose the correct one according to your machine. If you opt for a reference element, also pick up the Sliding Clamps: System 3R compatible MaxxMacro A2392 MXRuler WEDM 86mm Clamps
• The MXRuler is compatible with multiple accessories, and the dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler 86mm
• x1 Eccentric Stop
• x1 Clamps Non-Rail (MX-A239)
• x3 Zero-line Support tab (MX-23922)
• x2 5mm Support tab (MX-23925)
• x3 Basic Clamps (MX-239241)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

Vertical setup:

Product Details:

System 3R compatible MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for machines with a frame table. With the aid of MXRuler, rectangular or round workpieces, lightweight or heavy, large or small, are located on the machine zero line, without risk of collision. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• MXRuler's are available in various lengths to match different machines.
• High quality materials: Full rust proof design.
• Built-in height adjustment
• 86mm version: This is a more rigid design with upgraded width from 60mm to 86mm wide and a thicker height from 30mm to 36mm height
• Compatible with any reference element, choose the correct one according to your machine. If you opt for a reference element, also pick up the Sliding Clamps: System 3R compatible MaxxMacro A2392 MXRuler WEDM 86mm Clamps
• The MXRuler is compatible with multiple accessories, and the dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler 86mm
• x1 Eccentric Stop
• x1 Clamps Non-Rail (MX-A239)
• x3 Zero-line Support tab (MX-23922)
• x2 5mm Support tab (MX-23925)
• x3 Basic Clamps (MX-239241)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Mitsubishi FA30-S Advance
  
• Sodick AQ750L
  
• Seibu 1175B
  
• Seibu MM75B
  
• Seibu M75B
  

Product Details:

System 3R compatible MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for machines with a frame table. With the aid of MXRuler, rectangular or round workpieces, lightweight or heavy, large or small, are located on the machine zero line, without risk of collision. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• MXRuler's are available in various lengths to match different machines.
• High quality materials: Full rust proof design.
• Built-in height adjustment
• 86mm version: This is a more rigid design with upgraded width from 60mm to 86mm wide and a thicker height from 30mm to 36mm height
• Compatible with any reference element, choose the correct one according to your machine. If you opt for a reference element, also pick up the Sliding Clamps: System 3R compatible MaxxMacro A2392 MXRuler WEDM 86mm Clamps
• The MXRuler is compatible with multiple accessories, and the dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler 86mm
• x1 Eccentric Stop
• x1 Clamps Non-Rail (MX-A239)
• x3 Zero-line Support tab (MX-23922)
• x2 5mm Support tab (MX-23925)
• x3 Basic Clamps (MX-239241)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Fanuc alpha 1iA
  
• Fanuc Alpha 1C
  
• Sodick A500
  
• Sodick A530
• Sodick VZ500L
  
• Makino U53
  
• Makino U53i
  

Product Details:

System 3R compatible MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for machines with a frame table. With the aid of MXRuler, rectangular or round workpieces, lightweight or heavy, large or small, are located on the machine zero line, without risk of collision. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• MXRuler's are available in various lengths to match different machines.
• High quality materials: Full rust proof design.
• Built-in height adjustment
• 86mm version: This is a more rigid design with upgraded width from 60mm to 86mm wide and a thicker height from 30mm to 36mm height
• Compatible with any reference element, choose the correct one according to your machine. If you opt for a reference element, also pick up the Sliding Clamps: System 3R compatible MaxxMacro A2392 MXRuler WEDM 86mm Clamps
• The MXRuler is compatible with multiple accessories, and the dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler 86mm
• x1 Eccentric Stop
• x1 Clamps Non-Rail (MX-A239)
• x3 Zero-line Support tab (MX-23922)
• x2 5mm Support tab (MX-23925)
• x3 Basic Clamps (MX-239241)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Chmer 743
  

Product Details:

System 3R compatible MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for machines with a frame table. With the aid of MXRuler, rectangular or round workpieces, lightweight or heavy, large or small, are located on the machine zero line, without risk of collision. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• MXRuler's are available in various lengths to match different machines.
• High quality materials: Full rust proof design.
• Built-in height adjustment
• Compatible with any reference element, choose the correct one according to your machine. If you opt for a reference element, also pick up the Sliding Clamps: System 3R compatible MaxxMacro A2391 MXRuler WEDM 60mm Clamps
• The MXRuler is compatible with multiple accessories, and the dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler
• x1 Eccentric Stop
• x1 Clamps Non-Rail (MX-A239)
• x2 Zero-line Support tab (MX-23922)
• x2 5mm Support tab (MX-23925)
• x2 Basic Clamps (MX-239241)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

Product Details:

System 3R compatible MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for machines with a frame table. With the aid of MXRuler, rectangular or round workpieces, lightweight or heavy, large or small, are located on the machine zero line, without risk of collision. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• MXRuler's are available in various lengths to match different machines.
• High quality materials: Full rust proof design.
• Built-in height adjustment
• Compatible with any reference element, choose the correct one according to your machine. If you opt for a reference element, also pick up the Sliding Clamps: System 3R compatible MaxxMacro A2391 MXRuler WEDM 60mm Clamps
• The MXRuler is compatible with multiple accessories, and the dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler
• x1 Eccentric Stop
• x1 Clamps Non-Rail (MX-A239)
• x2 Zero-line Support tab (MX-23922)
• x2 5mm Support tab (MX-23925)
• x2 Basic Clamps (MX-239241)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Charmilles RoboFil 230
• Charmilles RoboFil 240
• Charmilles RoboFil 240cc
• AgieCharmilles CUT P 350
• AgieCharmilles CUT 20P
• AgieCharmilles CUT C 350
• AgieCharmilles CUT E 350
  
• Makino UPV-3
• Makino W32FB
• Makino U32
• Makino U32i
• Makino WB32B
• Makino U3 (U-shape)
  
• Makino UP32j
  
• Fanuc alpha 0iD
• Fanuc alpha 0iDP
• Fanuc alpha 0iE
• Sodick AQ327L
• Sodick VZ300L
  

Vertical setup:

• Fanuc alpha 1iA
  
• Fanuc alpha 1iB
• Fanuc alpha 1iC
• Makino U53 (Square)
• U53i (Square)
• U53j (Square)
• U53Tj (Square)
• UP53j (Square)
• UPV-5
• W53FB (Square)
• WB53B (Square)
  
• AgieCharmilles CUT 300 (yr 2012-)
• AgieCharmilles CUT 300 mS / Sp
• AgieCharmilles CUT P 550
  
• Charmilles RoboFil 430
• Charmilles RoboFil 440
  
  

Product Details:

System 3R compatible MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for machines with a frame table. With the aid of MXRuler, rectangular or round workpieces, lightweight or heavy, large or small, are located on the machine zero line, without risk of collision. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• MXRuler's are available in various lengths to match different machines.
• High quality materials: Full rust proof design.
• Built-in height adjustment
• Compatible with any reference element, choose the correct one according to your machine. If you opt for a reference element, also pick up the Sliding Clamps: System 3R compatible MaxxMacro A2391 MXRuler WEDM 60mm Clamps
• The MXRuler is compatible with multiple accessories, and the dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler
• x1 Eccentric Stop
• x1 Clamps Non-Rail (MX-A239)
• x2 Zero-line Support tab (MX-23922)
• x2 5mm Support tab (MX-23925)
• x2 Basic Clamps (MX-239241)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Vertical setup:

• Charmilles RoboFil 380
• Charmilles RoboFil 390
  

Product Details:

System 3R compatible MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for machines with a frame table. With the aid of MXRuler, rectangular or round workpieces, lightweight or heavy, large or small, are located on the machine zero line, without risk of collision. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• MXRuler's are available in various lengths to match different machines.
• High quality materials: Full rust proof design.
• Built-in height adjustment
• Compatible with any reference element, choose the correct one according to your machine. If you opt for a reference element, also pick up the Sliding Clamps: System 3R compatible MaxxMacro A2391 MXRuler WEDM 60mm Clamps
• The MXRuler is compatible with multiple accessories, and the dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler
• x1 Eccentric Stop
• x1 Clamps Non-Rail (MX-A239)
• x2 Zero-line Support tab (MX-23922)
• x2 5mm Support tab (MX-23925)
• x2 Basic Clamps (MX-239241)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Fanuc alpha C400iA
  
• Makino U3 H.E.A.T. (Square)
  
• Makino U3 (U-shape)
  
• Agie Attak
• Agie Celebration 2
• Agie Challenge 2
• Agie Classic 2
• Agie Evolution 2
• Agie Excellence 2
• Agie Progress 2
• AgieCharmilles CUT 2000 / S / X (yr 2011-)
• AgieCharmilles CUT X 350
• AgieCharmilles Progress VP2 (yr2014-2021)

Vertical setup:

• Agie Challenge 3 (Square)
• Agie Classic 3 (Square)
• Agie Evolution 3 (Square)
• Agie Excellence 3 (Square)
• Agie Progress 3
  

Product Details:

MM-RU60R435System 3R compatible MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for machines with a frame table. With the aid of MXRuler, rectangular or round workpieces, lightweight or heavy, large or small, are located on the machine zero line, without risk of collision. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• MXRuler's are available in various lengths to match different machines.
• High quality materials: Full rust proof design.
• Built-in height adjustment
• Compatible with any reference element, choose the correct one according to your machine. If you opt for a reference element, also pick up the Sliding Clamps: System 3R compatible MaxxMacro A2391 MXRuler WEDM 60mm Clamps
• The MXRuler is compatible with multiple accessories, and the dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler
• x1 Eccentric Stop
• x1 Clamps Non-Rail (MX-A239)
• x2 Zero-line Support tab (MX-23922)
• x2 5mm Support tab (MX-23925)
• x2 Basic Clamps (MX-239241)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• AgieCharmilles CUT 200 (yr 2012-)
  

Vertical setup:

• AgieCharmilles CUT 3000 / S / X (yr 2011-)
• AgieCharmilles CUT X 500
• AgieCharmilles Progress VP3 (yr2014-2021)
  

Product Details:

System 3R compatible MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for machines with a frame table. With the aid of MXRuler, rectangular or round workpieces, lightweight or heavy, large or small, are located on the machine zero line, without risk of collision. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• MXRuler's are available in various lengths to match different machines.
• High quality materials: Full rust proof design.
• Built-in height adjustment
• Compatible with any reference element, choose the correct one according to your machine. If you opt for a reference element, also pick up the Sliding Clamps: System 3R compatible MaxxMacro A2391 MXRuler WEDM 60mm Clamps
• The MXRuler is compatible with multiple accessories, and the dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler
• x1 Eccentric Stop
• x1 Clamps Non-Rail (MX-A239)
• x2 Zero-line Support tab (MX-23922)
• x2 5mm Support tab (MX-23925)
• x2 Basic Clamps (MX-239241)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Mitsubishi MP1200
• Mitsubishi MV1200R
• Mitsubishi MD Pro 3
• Mitsubishi NA12
• Mitsubishi NA1200
• Mitsubishi NA1200P
• Mitsubishi MV1200S
• Charmilles RoboFil 330
  
• Excetek V400G
  
• Fanuc alpha C400iB
• Fanuc alpha C400iC
  
• Sodick AL400G
• Sodick AL400P
• Sodick ALC400G
• Sodick ALN400G
• Sodick ALN400Q
• Sodick VL400Q
• Sodick AG400L
• Sodick AQ400L
• Sodick SL400G
• Sodick SL400Q
• Sodick SLC400G

Vertical setup:

• Fanuc alpha 1iD
• Fanuc alpha 1iDP
• Fanuc alpha 1iE
• Fanuc alpha C600iA
• Fanuc alpha C600iB
• Fanuc alpha C600iC
• Mitsubishi BA24
• Mitsubishi NA24
• Mitsubishi NA2400
• Mitsubishi NA2400P
• Mitsubishi MP2400
• Mitsubishi MV2400R / R Z+
• Mitsubishi MV2400S Z+
  
• Makino DUO64
• Makino SP64 (yr 2005-)
  

Product Details:

System 3R compatible MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for machines with a frame table. With the aid of MXRuler, rectangular or round workpieces, lightweight or heavy, large or small, are located on the machine zero line, without risk of collision. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• MXRuler's are available in various lengths to match different machines.
• High quality materials: Full rust proof design.
• Built-in height adjustment
• Compatible with any reference element, choose the correct one according to your machine. If you opt for a reference element, also pick up the Sliding Clamps: System 3R compatible MaxxMacro A2391 MXRuler WEDM 60mm Clamps
• The MXRuler is compatible with multiple accessories, and the dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler
• x1 Eccentric Stop
• x1 Clamps Non-Rail (MX-A239)
• x2 Zero-line Support tab (MX-23922)
• x2 5mm Support tab (MX-23925)
• x2 Basic Clamps (MX-239241)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• ONA AE300
• ONA AX3
• Chmer 432S

Vertical setup:

• ONA AV35
  

Product Details:

System 3R compatible MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for machines with a frame table. With the aid of MXRuler, rectangular or round workpieces, lightweight or heavy, large or small, are located on the machine zero line, without risk of collision. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• MXRuler's are available in various lengths to match different machines.
• High quality materials: Full rust proof design.
• Built-in height adjustment
• Compatible with any reference element, choose the correct one according to your machine. If you opt for a reference element, also pick up the Sliding Clamps: System 3R compatible MaxxMacro A2391 MXRuler WEDM 60mm Clamps
• The MXRuler is compatible with multiple accessories, and the dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler
• x1 Eccentric Stop
• x1 Clamps Non-Rail (MX-A239)
• x2 Zero-line Support tab (MX-23922)
• x2 5mm Support tab (MX-23925)
• x2 Basic Clamps (MX-239241)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• ONA AF25

Product Details:

System 3R compatible MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for machines with a frame table. With the aid of MXRuler, rectangular or round workpieces, lightweight or heavy, large or small, are located on the machine zero line, without risk of collision. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• MXRuler's are available in various lengths to match different machines.
• High quality materials: Full rust proof design.
• Built-in height adjustment
• Compatible with any reference element, choose the correct one according to your machine. If you opt for a reference element, also pick up the Sliding Clamps: System 3R compatible MaxxMacro A2391 MXRuler WEDM 60mm Clamps
• The MXRuler is compatible with multiple accessories, and the dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler
• x1 Eccentric Stop
• x1 Clamps Non-Rail (MX-A239)
• x2 Zero-line Support tab (MX-23922)
• x2 5mm Support tab (MX-23925)
• x2 Basic Clamps (MX-239241)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Vertical setup:

• Makino SP64 (yr -2005)
  

Product Details:

System 3R compatible MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for machines with a frame table. With the aid of MXRuler, rectangular or round workpieces, lightweight or heavy, large or small, are located on the machine zero line, without risk of collision. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• MXRuler's are available in various lengths to match different machines.
• High quality materials: Full rust proof design.
• Built-in height adjustment
• Compatible with any reference element, choose the correct one according to your machine. If you opt for a reference element, also pick up the Sliding Clamps: System 3R compatible MaxxMacro A2391 MXRuler WEDM 60mm Clamps
• The MXRuler is compatible with multiple accessories, and the dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler
• x1 Eccentric Stop
• x1 Clamps Non-Rail (MX-A239)
• x2 Zero-line Support tab (MX-23922)
• x2 5mm Support tab (MX-23925)
• x2 Basic Clamps (MX-239241)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Fanuc Alpha 1B
  
• Makino DUO43
  
• Sodick AP450L (W. 2002-)
• Sodick AP450L (yr. 2001-)
  

Vertical setup:

• AgieCharmilles CUT 30P (yr 2012-)
• AgieCharmilles CUT C 600
• AgieCharmilles CUT E 600
  
• Makino U6 H.E.A.T. (Square)
• Makino U6i (Square)
  

Product Details:

System 3R compatible MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for machines with a frame table. With the aid of MXRuler, rectangular or round workpieces, lightweight or heavy, large or small, are located on the machine zero line, without risk of collision. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• MXRuler's are available in various lengths to match different machines.
• High quality materials: Full rust proof design.
• Built-in height adjustment
• Compatible with any reference element, choose the correct one according to your machine. If you opt for a reference element, also pick up the Sliding Clamps: System 3R compatible MaxxMacro A2391 MXRuler WEDM 60mm Clamps
• The MXRuler is compatible with multiple accessories, and the dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler
• x1 Eccentric Stop
• x1 Clamps Non-Rail (MX-A239)
• x2 Zero-line Support tab (MX-23922)
• x2 5mm Support tab (MX-23925)
• x2 Basic Clamps (MX-239241)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

Vertical setup:

Product Details:

System 3R compatible MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for machines with a frame table. With the aid of MXRuler, rectangular or round workpieces, lightweight or heavy, large or small, are located on the machine zero line, without risk of collision. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• MXRuler's are available in various lengths to match different machines.
• High quality materials: Full rust proof design.
• Built-in height adjustment
• Compatible with any reference element, choose the correct one according to your machine. If you opt for a reference element, also pick up the Sliding Clamps: System 3R compatible MaxxMacro A2391 MXRuler WEDM 60mm Clamps
• The MXRuler is compatible with multiple accessories, and the dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler
• x1 Eccentric Stop
• x1 Clamps Non-Rail (MX-A239)
• x2 Zero-line Support tab (MX-23922)
• x2 5mm Support tab (MX-23925)
• x2 Basic Clamps (MX-239241)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Makino EU43
• Makino SP43
  
• Makino U32j (Square)
  

Product Details:

System 3R compatible MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for machines with a frame table. With the aid of MXRuler, rectangular or round workpieces, lightweight or heavy, large or small, are located on the machine zero line, without risk of collision. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• MXRuler's are available in various lengths to match different machines.
• High quality materials: Full rust proof design.
• Built-in height adjustment
• Compatible with any reference element, choose the correct one according to your machine. If you opt for a reference element, also pick up the Sliding Clamps: System 3R compatible MaxxMacro A2391 MXRuler WEDM 60mm Clamps
• The MXRuler is compatible with multiple accessories, and the dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler
• x1 Eccentric Stop
• x1 Clamps Non-Rail (MX-A239)
• x2 Zero-line Support tab (MX-23922)
• x2 5mm Support tab (MX-23925)
• x2 Basic Clamps (MX-239241)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

Vertical setup:

Product Details:

System 3R compatible MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for machines with a frame table. With the aid of MXRuler, rectangular or round workpieces, lightweight or heavy, large or small, are located on the machine zero line, without risk of collision. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• MXRuler's are available in various lengths to match different machines.
• High quality materials: Full rust proof design.
• Built-in height adjustment
• Compatible with any reference element, choose the correct one according to your machine. If you opt for a reference element, also pick up the Sliding Clamps: System 3R compatible MaxxMacro A2391 MXRuler WEDM 60mm Clamps
• The MXRuler is compatible with multiple accessories, and the dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler
• x1 Eccentric Stop
• x1 Clamps Non-Rail (MX-A239)
• x2 Zero-line Support tab (MX-23922)
• x2 5mm Support tab (MX-23925)
• x2 Basic Clamps (MX-239241)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Fanuc Alpha 1A
  
• Charmilles RoboFil 380
• Charmilles RoboFil 390
• Charmilles RoboFil 290
• Charmilles RoboFil 300
• Charmilles RoboFil 304
• Charmilles RoboFil 310
  

Product Details:

System 3R compatible MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for machines with a frame table. With the aid of MXRuler, rectangular or round workpieces, lightweight or heavy, large or small, are located on the machine zero line, without risk of collision. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• MXRuler's are available in various lengths to match different machines.
• High quality materials: Full rust proof design.
• Built-in height adjustment
• Compatible with any reference element, choose the correct one according to your machine. If you opt for a reference element, also pick up the Sliding Clamps: System 3R compatible MaxxMacro A2391 MXRuler WEDM 60mm Clamps
• The MXRuler is compatible with multiple accessories, and the dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler
• x1 Eccentric Stop
• x1 Clamps Non-Rail (MX-A239)
• x2 Zero-line Support tab (MX-23922)
• x2 5mm Support tab (MX-23925)
• x2 Basic Clamps (MX-239241)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Fanuc alpha 0iA
• Fanuc alpha 0iB
• Fanuc alpha 0iC
• Fanuc Alpha 0C
  
• Fanuc alpha 0iP
  
• Mitsubishi BA8
• Mitsubishi MD Pro 2
• Mitsubishi PA05
  
• Sodick AD325L
  

Vertical setup:

• ONA AE300
• ONA AX3
  
• Makino SP43
  

Product Details:

System 3R compatible MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for machines with a frame table. With the aid of MXRuler, rectangular or round workpieces, lightweight or heavy, large or small, are located on the machine zero line, without risk of collision. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• MXRuler's are available in various lengths to match different machines.
• High quality materials: Full rust proof design.
• Built-in height adjustment
• Compatible with any reference element, choose the correct one according to your machine. If you opt for a reference element, also pick up the Sliding Clamps: System 3R compatible MaxxMacro A2391 MXRuler WEDM 60mm Clamps
• The MXRuler is compatible with multiple accessories, and the dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler
• x1 Eccentric Stop
• x1 Clamps Non-Rail (MX-A239)
• x2 Zero-line Support tab (MX-23922)
• x2 5mm Support tab (MX-23925)
• x2 Basic Clamps (MX-239241)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Vertical setup:

• Makino PX36
  
• Makino UP6
  

Product Details:

System 3R compatible MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for machines with a frame table. With the aid of MXRuler, rectangular or round workpieces, lightweight or heavy, large or small, are located on the machine zero line, without risk of collision. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• MXRuler's are available in various lengths to match different machines.
• High quality materials: Full rust proof design.
• Built-in height adjustment
• Compatible with any reference element, choose the correct one according to your machine. If you opt for a reference element, also pick up the Sliding Clamps: System 3R compatible MaxxMacro A2391 MXRuler WEDM 60mm Clamps
• The MXRuler is compatible with multiple accessories, and the dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler
• x1 Eccentric Stop
• x1 Clamps Non-Rail (MX-A239)
• x2 Zero-line Support tab (MX-23922)
• x2 5mm Support tab (MX-23925)
• x2 Basic Clamps (MX-239241)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Charmilles RoboFil 2050
• Charmilles 230/240 FI
  

Product Details:

System 3R compatible MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for machines with a frame table. With the aid of MXRuler, rectangular or round workpieces, lightweight or heavy, large or small, are located on the machine zero line, without risk of collision. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• MXRuler's are available in various lengths to match different machines.
• High quality materials: Full rust proof design.
• Built-in height adjustment
• 86mm version: This is a more rigid design with upgraded width from 60mm to 86mm wide and a thicker height from 30mm to 36mm height
• Compatible with any reference element, choose the correct one according to your machine. If you opt for a reference element, also pick up the Sliding Clamps: System 3R compatible MaxxMacro A2392 MXRuler WEDM 86mm Clamps
• The MXRuler is compatible with multiple accessories, and the dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler 86mm
• x1 Eccentric Stop
• x1 Clamps Non-Rail (MX-A239)
• x3 Zero-line Support tab (MX-23922)
• x2 5mm Support tab (MX-23925)
• x3 Basic Clamps (MX-239241)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Excetek V500G
  
• Mitsubishi FA20-S Advance
  
• Mitsubishi FA20
  
• Mitsubishi FA20SM (old ver.)
  
• Mitsubishi FX20 (old ver.)
  
• Mitsubishi PA20
  
• Mitsubishi QA20
  
• Mitsubishi SX2
  
• Mitsubishi SX20
  
• Mitsubishi FA30
  
• Mitsubishi FX30
  
• Mitsubishi FX30K
  
• Seibu M50B
  
• Seibu MM50B
  
• Seibu 1JMM50B

Vertical setup:

• Mitsubishi FA30-S Advance
  
• Seibu MM75B
  

Product Details:

System 3R compatible MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for machines with a frame table. With the aid of MXRuler, rectangular or round workpieces, lightweight or heavy, large or small, are located on the machine zero line, without risk of collision. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• MXRuler's are available in various lengths to match different machines.
• High quality materials: Full rust proof design.
• Built-in height adjustment
• Compatible with any reference element, choose the correct one according to your machine. If you opt for a reference element, also pick up the Sliding Clamps: System 3R compatible MaxxMacro A2391 MXRuler WEDM 60mm Clamps
• The MXRuler is compatible with multiple accessories, and the dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler
• x1 Eccentric Stop
• x1 Clamps Non-Rail (MX-A239)
• x2 Zero-line Support tab (MX-23922)
• x2 5mm Support tab (MX-23925)
• x2 Basic Clamps (MX-239241)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Mitsubishi FA10-S Advance
• Mitsubishi FA10
• Mitsubishi FA10 SM
• Mitsubishi FX10
• Mitsubishi FX10 K
• Mitsubishi SX1
• Mitsubishi SX10
  
• Sodick AQ325L
  
• Seibu M35B
• Seibu MM35B
• Accutex 300I

Vertical setup:

• Mitsubishi FA20-S Advance
• Mitsubishi FA20
• Mitsubishi FA20SM
• Mitsubishi X20
• Mitsubishi PA20
• Mitsubishi QA20
• Mitsubishi SX2
• Mitsubishi SX20
  
• Seibu MM50B
• Seibu 1JMM50B
  

Product Details:

System 3R compatible MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for machines with a frame table. With the aid of MXRuler, rectangular or round workpieces, lightweight or heavy, large or small, are located on the machine zero line, without risk of collision. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• MXRuler's are available in various lengths to match different machines.
• High quality materials: Full rust proof design.
• Built-in height adjustment
• Compatible with any reference element, choose the correct one according to your machine. If you opt for a reference element, also pick up the Sliding Clamps: System 3R compatible MaxxMacro A2391 MXRuler WEDM 60mm Clamps
• The MXRuler is compatible with multiple accessories, and the dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler
• x1 Eccentric Stop
• x1 Clamps Non-Rail (MX-A239)
• x2 Zero-line Support tab (MX-23922)
• x2 5mm Support tab (MX-23925)
• x2 Basic Clamps (MX-239241)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Sodick AQ360L
  

Product Details:

System 3R compatible MaxxMacro MXRuler WEDM Reference elements have been developed to incorporate a dovetail-shaped reference element for machines with a parallel or U-shaped machine table, as well as for machines with a frame table. This reference element is compatible with the MXRuler System as well as the full System 3R compatible MaxxMacro WEDM system, which includes a wide range of accessories for clamping various workpieces, positioning them on the machine zero line, without the risk of collision.

The length, hole spacing and hole edge spacing of the hardened reference elements are matched to the machine in question. Due to different shape and size of supporting tables made available, these reference rails are most often adopted to brand and model. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• Adjustable End-Stop: included to enable repeatability.
  
• High quality materials: Full rust proof design.
• MXRuler's Reference Elements are available in various lengths to match different machines. All other sizes are available to quote.
• The dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
  
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler Reference element includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler Reference element (1pc)
• x1 Adjustable End-Stop

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• AgieCharmilles CUT 400 (yr 2012)
  
• AgieCharmilles CUT 400 Sp
  
• AgieCharmilles CUT P 800
  
• AgieCharmilles CUT P 800 L Flushing
  
• Charmilles RoboFil 640
  
• Makino U6 H.E.A.T. (Square)
  
• Makino U6 (U-shape)
  
• Makino U6i (Square)
  
• Makino U53j
  
• Makino U53Tj
  
• Makino UP53j
  
• Makino UPV-5
  
• Makino W53FB
• Makino EU64
  
• Makino U53
  
• Makino U53i
  
• Makino WB53B
  

Vertical setup:

• AgieCharmilles CUT 300 mS / Sp
  
• AgieCharmilles CUT P 550
  
• AgieCharmilles CUT P 1250
  
• Charmilles RoboFil 430
  
• Charmilles RoboFil 440
  
• Makino U53j
  
• Makino U53Tj
  
• Makino UP53j
  
• Makino UPV-5
  
• Makino W53FB
  
• Makino U53
  
• Makino U53i
  
• Makino WB53B
  
• Mitsubishi FA20
  
• Mitsubishi FA20SM
  
• Mitsubishi FX20
  
• Mitsubishi PA20
  
• Mitsubishi QA20
  
• Sodick AL400G
  
• Sodick AL400P
  
• Sodick ALC400G
  
• Sodick ALN400G
  
• Sodick ALN400Q
  
• Sodick VL400Q
  
• Sodick AG400L
  
• Sodick SL400G
  
• Sodick SL400Q
  
• Sodick SLC400G
  

Product Details:

System 3R compatible MaxxMacro MXRuler WEDM Reference elements have been developed to incorporate a dovetail-shaped reference element for machines with a parallel or U-shaped machine table, as well as for machines with a frame table. This reference element is compatible with the MXRuler System as well as the full System 3R compatible MaxxMacro WEDM system, which includes a wide range of accessories for clamping various workpieces, positioning them on the machine zero line, without the risk of collision.

The length, hole spacing and hole edge spacing of the hardened reference elements are matched to the machine in question. Due to different shape and size of supporting tables made available, these reference rails are most often adopted to brand and model. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• Adjustable End-Stop: included to enable repeatability.
  
• High quality materials: Full rust proof design.
• MXRuler's Reference Elements are available in various lengths to match different machines. All other sizes are available to quote.
• The dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
  
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler Reference element includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler Reference element (1pc)
• x1 Adjustable End-Stop

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• AgieCharmilles CUT 3000 / S / X (yr 2011-)
  
• AgieCharmilles CUT X 500
  
• Agie Challenge 3
  
• Agie Classic 3
  
• Agie Evolution 3
  
• Agie Excellence 3
  
• Agie Progress 3
  
• AgieCharmilles Progress VP3 (yr2014-2021)
  

Product Details:

System 3R compatible MaxxMacro MXRuler WEDM Reference elements have been developed to incorporate a dovetail-shaped reference element for machines with a parallel or U-shaped machine table, as well as for machines with a frame table. This reference element is compatible with the MXRuler System as well as the full System 3R compatible MaxxMacro WEDM system, which includes a wide range of accessories for clamping various workpieces, positioning them on the machine zero line, without the risk of collision.

The length, hole spacing and hole edge spacing of the hardened reference elements are matched to the machine in question. Due to different shape and size of supporting tables made available, these reference rails are most often adopted to brand and model. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• Adjustable End-Stop: included to enable repeatability.
  
• High quality materials: Full rust proof design.
• MXRuler's Reference Elements are available in various lengths to match different machines. All other sizes are available to quote.
• The dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
  
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler Reference element includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler Reference element (1pc)
• x1 Adjustable End-Stop

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Agie Progress 4
  
• AgieCharmilles Progress VP4 (yr2014-2021)
  

Vertical setup:

• Agie Challenge 3 (Square)
  
• Agie Classic 3 (Square)
  
• Agie Evolution 3 (Square)
  
• Agie Excellence 3 (Square)
  
• Agie Progress 3
  

Product Details:

System 3R compatible MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for machines with a frame table. With the aid of MXRuler, rectangular or round workpieces, lightweight or heavy, large or small, are located on the machine zero line, without risk of collision. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• MXRuler's are available in various lengths to match different machines.
• High quality materials: Full rust proof design.
• Built-in height adjustment
• Compatible with any reference element, choose the correct one according to your machine. If you opt for a reference element, also pick up the Sliding Clamps: System 3R compatible MaxxMacro A2391 MXRuler WEDM 60mm Clamps
• The MXRuler is compatible with multiple accessories, and the dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler
• x1 Eccentric Stop
• x1 Clamps Non-Rail (MX-A239)
• x2 Zero-line Support tab (MX-23922)
• x2 5mm Support tab (MX-23925)
• x2 Basic Clamps (MX-239241)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• AgieCharmilles CUT 1000 (yr 2000-)
  

Product Details:

System 3R compatible MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for machines with a frame table. With the aid of MXRuler, rectangular or round workpieces, lightweight or heavy, large or small, are located on the machine zero line, without risk of collision. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• MXRuler's are available in various lengths to match different machines.
• High quality materials: Full rust proof design.
• Built-in height adjustment
• Compatible with any reference element, choose the correct one according to your machine. If you opt for a reference element, also pick up the Sliding Clamps: System 3R compatible MaxxMacro A2391 MXRuler WEDM 60mm Clamps
• The MXRuler is compatible with multiple accessories, and the dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler
• x1 Eccentric Stop
• x1 Clamps Non-Rail (MX-A239)
• x2 Zero-line Support tab (MX-23922)
• x2 5mm Support tab (MX-23925)
• x2 Basic Clamps (MX-239241)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Seibu M25LP
• Sodick AP250L

Vertical setup:

• Seibu M25LP
• Mitsubishi FA10-S Advance
• Mitsubishi FA10
• Mitsubishi FA10 SM
• Mitsubishi FX10
• Mitsubishi FX10 K
• Mitsubishi SX1
• Mitsubishi SX10
• Charmilles RoboFil 230
• Charmilles RoboFil 240
• Charmilles RoboFil 240cc
  

Product Details:

System 3R compatible MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for machines with a frame table. With the aid of MXRuler, rectangular or round workpieces, lightweight or heavy, large or small, are located on the machine zero line, without risk of collision. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• MXRuler's are available in various lengths to match different machines.
• High quality materials: Full rust proof design.
• Built-in height adjustment
• Compatible with any reference element, choose the correct one according to your machine. If you opt for a reference element, also pick up the Sliding Clamps: System 3R compatible MaxxMacro A2391 MXRuler WEDM 60mm Clamps
• The MXRuler is compatible with multiple accessories, and the dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler
• x1 Eccentric Stop
• x1 Clamps Non-Rail (MX-A239)
• x2 Zero-line Support tab (MX-23922)
• x2 5mm Support tab (MX-23925)
• x2 Basic Clamps (MX-239241)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Vertical setup:

• AgieCharmilles CUT 200 (yr 2012-)
  
• AgieCharmilles CUT 200 Bp
  
• AgieCharmilles CUT 200 C / P
  
• AgieCharmilles CUT 200 mS / Sp
  
• AgieCharmilles CUT P 350
  

Product Details:

System 3R compatible MaxxMacro MXRuler WEDM Reference elements have been developed to incorporate a dovetail-shaped reference element for machines with a parallel or U-shaped machine table, as well as for machines with a frame table. This reference element is compatible with the MXRuler System as well as the full System 3R compatible MaxxMacro WEDM system, which includes a wide range of accessories for clamping various workpieces, positioning them on the machine zero line, without the risk of collision.

The length, hole spacing and hole edge spacing of the hardened reference elements are matched to the machine in question. Due to different shape and size of supporting tables made available, these reference rails are most often adopted to brand and model. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• Adjustable End-Stop: included to enable repeatability.
  
• High quality materials: Full rust proof design.
• MXRuler's Reference Elements are available in various lengths to match different machines. All other sizes are available to quote.
• The dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
  
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler Reference element includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler Reference element (1pc)
• x1 Adjustable End-Stop

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• AgieCharmilles CUT P 1250
  
• Excetek V1060
  
• Makino EU43
  
• Makino SP43
  
• Sodick AL600G
  
• Sodick ALC600G
  
• Sodick ALN600G
  
• Sodick ALN600Q
  
• Sodick VL600Q
  
• Sodick AG600L
  
• Sodick AQ537L
  
• Sodick AQ560L
  
• Sodick SL600G
  
• Sodick SL600P
  
• Sodick SL600Q
  
• Sodick SLC600G
  
• Sodick AQ750L
  
• Sodick AQ550
  
• Seibu M35B
  

Vertical setup:

• Charmilles RoboFil 640
  
• Charmilles RoboFil 690
  
• Charmilles RoboFil 690cc
  
• Makino U1310
  
• Makino EU43
  
• Makino SP43
  
• Mitsubishi MV1200S
  
• Sodick AD325L
  
• Sodick AL800G
  
• Sodick AL800P
  
• Sodick ALC800G
  
• Sodick ALN800G
  
• Sodick AQ900L
  
• Sodick AQ300
  
• Sodick AQ327L
  
• Sodick AQ400L
  

Product Details:

System 3R compatible MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for machines with a frame table. With the aid of MXRuler, rectangular or round workpieces, lightweight or heavy, large or small, are located on the machine zero line, without risk of collision. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• MXRuler's are available in various lengths to match different machines.
• High quality materials: Full rust proof design.
• Built-in height adjustment
• Compatible with any reference element, choose the correct one according to your machine. If you opt for a reference element, also pick up the Sliding Clamps: System 3R compatible MaxxMacro A2391 MXRuler WEDM 60mm Clamps
• The MXRuler is compatible with multiple accessories, and the dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler
• x1 Eccentric Stop
• x1 Clamps Non-Rail (MX-A239)
• x2 Zero-line Support tab (MX-23922)
• x2 5mm Support tab (MX-23925)
• x2 Basic Clamps (MX-239241)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Vertical setup:

• AgieCharmilles CUT 20P
  
• AgieCharmilles CUT C 350
  
• AgieCharmilles CUT E 350
  
• Makino U3 H.E.A.T. (Square)
  
• Makino U3i (Square)
  
• Makino U32j (Square)
  
• Makino UP32j (Square)
  
• Makino UPV-3
  
• Makino W32FB (Square)
  
• Makino U32 (Square)
  
• Makino U32i (Square)
  
• Makino WB32B (Square)
  

Product Details:

System 3R compatible MaxxMacro MXRuler WEDM Reference elements have been developed to incorporate a dovetail-shaped reference element for machines with a parallel or U-shaped machine table, as well as for machines with a frame table. This reference element is compatible with the MXRuler System as well as the full System 3R compatible MaxxMacro WEDM system, which includes a wide range of accessories for clamping various workpieces, positioning them on the machine zero line, without the risk of collision.

The length, hole spacing and hole edge spacing of the hardened reference elements are matched to the machine in question. Due to different shape and size of supporting tables made available, these reference rails are most often adopted to brand and model. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• Adjustable End-Stop: included to enable repeatability.
  
• High quality materials: Full rust proof design.
• MXRuler's Reference Elements are available in various lengths to match different machines. All other sizes are available to quote.
• The dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
  
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler Reference element includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler Reference element (1pc)
• x1 Adjustable End-Stop

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

Vertical setup:

Product Details:

System 3R compatible MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for machines with a frame table. With the aid of MXRuler, rectangular or round workpieces, lightweight or heavy, large or small, are located on the machine zero line, without risk of collision. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• MXRuler's are available in various lengths to match different machines.
• High quality materials: Full rust proof design.
• Built-in height adjustment
• Compatible with any reference element, choose the correct one according to your machine. If you opt for a reference element, also pick up the Sliding Clamps: System 3R compatible MaxxMacro A2391 MXRuler WEDM 60mm Clamps
• The MXRuler is compatible with multiple accessories, and the dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler
• x1 Eccentric Stop
• x1 Clamps Non-Rail (MX-A239)
• x2 Zero-line Support tab (MX-23922)
• x2 5mm Support tab (MX-23925)
• x2 Basic Clamps (MX-239241)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Vertical setup:

• Agie Attak
  
• Agie Celebration 2 (Square)
  
• Agie Challenge 2 (Square)
  
• Agie Classic 2 (Square)
  
• Agie Evolution 2 (Square)
  
• Agie Excellence 2 (Square)
  
• Agie Progress 2
  

Product Details:

System 3R compatible MaxxMacro MXRuler WEDM Reference elements have been developed to incorporate a dovetail-shaped reference element for machines with a parallel or U-shaped machine table, as well as for machines with a frame table. This reference element is compatible with the MXRuler System as well as the full System 3R compatible MaxxMacro WEDM system, which includes a wide range of accessories for clamping various workpieces, positioning them on the machine zero line, without the risk of collision.

The length, hole spacing and hole edge spacing of the hardened reference elements are matched to the machine in question. Due to different shape and size of supporting tables made available, these reference rails are most often adopted to brand and model. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• Adjustable End-Stop: included to enable repeatability.
  
• High quality materials: Full rust proof design.
• MXRuler's Reference Elements are available in various lengths to match different machines. All other sizes are available to quote.
• The dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
  
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler Reference element includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler Reference element (1pc)
• x1 Adjustable End-Stop

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Charmilles RoboFil 6040
  
• Charmilles RoboFil 6050
  
• Fanuc alpha C600iA
  
• Fanuc alpha C600iB
  
• Fanuc alpha C600iC
  
• Fanuc alpha 1iA
  
• Fanuc alpha 1iB
  
• Fanuc alpha 1iC
• Fanuc Alpha 1C
  
• Fanuc alpha 1iD
  
• Fanuc alpha 1iDP
  
• Fanuc alpha 1iE
  
• Mitsubishi FA40-S Advance
  
• Sodick AQ1200L
  
• ONA AF35
  
• Accutex 500I
  

Vertical setup:

• Mitsubishi FA40-S Advance
• Sodick AQ1200L

Product Details:

System 3R compatible MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for machines with a frame table. With the aid of MXRuler, rectangular or round workpieces, lightweight or heavy, large or small, are located on the machine zero line, without risk of collision. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• MXRuler's are available in various lengths to match different machines.
• High quality materials: Full rust proof design.
• Built-in height adjustment
• Compatible with any reference element, choose the correct one according to your machine. If you opt for a reference element, also pick up the Sliding Clamps: System 3R compatible MaxxMacro A2391 MXRuler WEDM 60mm Clamps
• The MXRuler is compatible with multiple accessories, and the dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler
• x1 Eccentric Stop
• x1 Clamps Non-Rail (MX-A239)
• x2 Zero-line Support tab (MX-23922)
• x2 5mm Support tab (MX-23925)
• x2 Basic Clamps (MX-239241)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Vertical setup:

• AgieCharmilles CUT 2000 / S / X (yr 2011-)
  
• AgieCharmilles CUT X 350
  
• AgieCharmilles Progress VP2 (yr2014-2021)
  

Product Details:

System 3R compatible MaxxMacro MXRuler WEDM Reference elements have been developed to incorporate a dovetail-shaped reference element for machines with a parallel or U-shaped machine table, as well as for machines with a frame table. This reference element is compatible with the MXRuler System as well as the full System 3R compatible MaxxMacro WEDM system, which includes a wide range of accessories for clamping various workpieces, positioning them on the machine zero line, without the risk of collision.

The length, hole spacing and hole edge spacing of the hardened reference elements are matched to the machine in question. Due to different shape and size of supporting tables made available, these reference rails are most often adopted to brand and model. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• Adjustable End-Stop: included to enable repeatability.
  
• High quality materials: Full rust proof design.
• MXRuler's Reference Elements are available in various lengths to match different machines. All other sizes are available to quote.
• The dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
  
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler Reference element includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler Reference element (1pc)
• x1 Adjustable End-Stop

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• AgieCharmilles CUT 30P (yr 2012-)
  
• Chmer 743
  

Vertical setup:

• ONA AE300
  
• ONA AX3
  

Product Details:

System 3R compatible MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for machines with a frame table. With the aid of MXRuler, rectangular or round workpieces, lightweight or heavy, large or small, are located on the machine zero line, without risk of collision. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• MXRuler's are available in various lengths to match different machines.
• High quality materials: Full rust proof design.
• Built-in height adjustment
• Compatible with any reference element, choose the correct one according to your machine. If you opt for a reference element, also pick up the Sliding Clamps: System 3R compatible MaxxMacro A2391 MXRuler WEDM 60mm Clamps
• The MXRuler is compatible with multiple accessories, and the dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler
• x1 Eccentric Stop
• x1 Clamps Non-Rail (MX-A239)
• x2 Zero-line Support tab (MX-23922)
• x2 5mm Support tab (MX-23925)
• x2 Basic Clamps (MX-239241)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Mitsubishi MX600
• Mitsubishi MX900
• Mitsubishi PA10
• Mitsubishi QA10
• Sodick AQ300
• Fanuc Alpha 0B
  

Vertical setup:

• Mitsubishi MX900
• Mitsubishi MP1200
• Mitsubishi MV1200R
• Mitsubishi MD Pro 3
  
• Makino DUO43
• Makino EU43
• Makino SP43
  

Product Details:

System 3R compatible MaxxMacro MXRuler WEDM Reference elements have been developed to incorporate a dovetail-shaped reference element for machines with a parallel or U-shaped machine table, as well as for machines with a frame table. This reference element is compatible with the MXRuler System as well as the full System 3R compatible MaxxMacro WEDM system, which includes a wide range of accessories for clamping various workpieces, positioning them on the machine zero line, without the risk of collision.

The length, hole spacing and hole edge spacing of the hardened reference elements are matched to the machine in question. Due to different shape and size of supporting tables made available, these reference rails are most often adopted to brand and model. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• Adjustable End-Stop: included to enable repeatability.
  
• High quality materials: Full rust proof design.
• MXRuler's Reference Elements are available in various lengths to match different machines. All other sizes are available to quote.
• The dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
  
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler Reference element includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler Reference element (1pc)
• x1 Adjustable End-Stop

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Seibu MM50B
  
• Seibu 1JMM50B
  

Product Details:

System 3R compatible MaxxMacro MXRuler WEDM Reference elements have been developed to incorporate a dovetail-shaped reference element for machines with a parallel or U-shaped machine table, as well as for machines with a frame table. This reference element is compatible with the MXRuler System as well as the full System 3R compatible MaxxMacro WEDM system, which includes a wide range of accessories for clamping various workpieces, positioning them on the machine zero line, without the risk of collision.

The length, hole spacing and hole edge spacing of the hardened reference elements are matched to the machine in question. Due to different shape and size of supporting tables made available, these reference rails are most often adopted to brand and model. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• Adjustable End-Stop: included to enable repeatability.
  
• High quality materials: Full rust proof design.
• MXRuler's Reference Elements are available in various lengths to match different machines. All other sizes are available to quote.
• The dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
  
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler Reference element includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler Reference element (1pc)
• x1 Adjustable End-Stop

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• AgieCharmilles CUT 1000 (yr 2000-)
  

Vertical setup:

• AgieCharmilles CUT 1000 (yr 2000-)
  

Product Details:

System 3R compatible MaxxMacro MXRuler WEDM Reference elements have been developed to incorporate a dovetail-shaped reference element for machines with a parallel or U-shaped machine table, as well as for machines with a frame table. This reference element is compatible with the MXRuler System as well as the full System 3R compatible MaxxMacro WEDM system, which includes a wide range of accessories for clamping various workpieces, positioning them on the machine zero line, without the risk of collision.

The length, hole spacing and hole edge spacing of the hardened reference elements are matched to the machine in question. Due to different shape and size of supporting tables made available, these reference rails are most often adopted to brand and model. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• Adjustable End-Stop: included to enable repeatability.
  
• High quality materials: Full rust proof design.
• MXRuler's Reference Elements are available in various lengths to match different machines. All other sizes are available to quote.
• The dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
  
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler Reference element includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler Reference element (1pc)
• x1 Adjustable End-Stop

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Sodick A500
  
• Sodick A600W
  

Product Details:

System 3R compatible MaxxMacro MXRuler WEDM Reference elements have been developed to incorporate a dovetail-shaped reference element for machines with a parallel or U-shaped machine table, as well as for machines with a frame table. This reference element is compatible with the MXRuler System as well as the full System 3R compatible MaxxMacro WEDM system, which includes a wide range of accessories for clamping various workpieces, positioning them on the machine zero line, without the risk of collision.

The length, hole spacing and hole edge spacing of the hardened reference elements are matched to the machine in question. Due to different shape and size of supporting tables made available, these reference rails are most often adopted to brand and model. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• Adjustable End-Stop: included to enable repeatability.
  
• High quality materials: Full rust proof design.
• MXRuler's Reference Elements are available in various lengths to match different machines. All other sizes are available to quote.
• The dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
  
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler Reference element includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler Reference element (1pc)
• x1 Adjustable End-Stop

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Excetek V650G
  
• Excetek V850G
  
• Makino U1310
  
• Mitsubishi FA30-S Advance
  
• Mitsubishi BA24
  
• Mitsubishi NA24
  
• Mitsubishi NA2400
  
• Mitsubishi NA2400P
  
• Sodick AL800G
  
• Sodick AL800P
  
• Sodick ALC800G
  
• Sodick ALN800G
  
• Seibu 1175B
  

Vertical setup:

• AgieCharmilles CUT 3000 / S / X (yr 2011-)
  
• AgieCharmilles CUT X 500
  
• AgieCharmilles Progress VP3 (yr2014-2021)
  
• Excetek V400G
  
• Excetek V650G
  
• Fanuc alpha 1iD
  
• Fanuc alpha 1iDP
  
• Fanuc alpha 1iE
  
• Makino EU64
  
• Mitsubishi FA20-S Advance
  
• Mitsubishi SX2
  
• Mitsubishi SX20
  
• Sodick AQ1200L
  
• ONA AF35
  
• ONA AV35
  
• Seibu M35B
  
• Seibu MM50B
  
• Seibu 1JMM50B
  

Product Details:

System 3R compatible MaxxMacro MXRuler WEDM Reference elements have been developed to incorporate a dovetail-shaped reference element for machines with a parallel or U-shaped machine table, as well as for machines with a frame table. This reference element is compatible with the MXRuler System as well as the full System 3R compatible MaxxMacro WEDM system, which includes a wide range of accessories for clamping various workpieces, positioning them on the machine zero line, without the risk of collision.

The length, hole spacing and hole edge spacing of the hardened reference elements are matched to the machine in question. Due to different shape and size of supporting tables made available, these reference rails are most often adopted to brand and model. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• Adjustable End-Stop: included to enable repeatability.
  
• High quality materials: Full rust proof design.
• MXRuler's Reference Elements are available in various lengths to match different machines. All other sizes are available to quote.
• The dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
  
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler Reference element includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler Reference element (1pc)
• x1 Adjustable End-Stop

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Vertical setup:

• AgieCharmilles CUT 2000 / S / X (yr 2011-)
  
• AgieCharmilles CUT X 350
  
• AgieCharmilles Progress VP2 (yr2014-2021)
  

Product Details:

System 3R compatible MaxxMacro MXRuler WEDM Reference elements have been developed to incorporate a dovetail-shaped reference element for machines with a parallel or U-shaped machine table, as well as for machines with a frame table. This reference element is compatible with the MXRuler System as well as the full System 3R compatible MaxxMacro WEDM system, which includes a wide range of accessories for clamping various workpieces, positioning them on the machine zero line, without the risk of collision.

The length, hole spacing and hole edge spacing of the hardened reference elements are matched to the machine in question. Due to different shape and size of supporting tables made available, these reference rails are most often adopted to brand and model. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• Adjustable End-Stop: included to enable repeatability.
  
• High quality materials: Full rust proof design.
• MXRuler's Reference Elements are available in various lengths to match different machines. All other sizes are available to quote.
• The dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
  
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler Reference element includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler Reference element (1pc)
• x1 Adjustable End-Stop

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• AgieCharmilles CUT 2000 / S / X (yr 2011-)
  
• AgieCharmilles CUT X 350
  
• Agie Attak
  
• Agie Celebration 2
  
• Agie Challenge 2
  
• Agie Classic 2
  
• Agie Evolution 2
• Agie Excellence 2
  
• Agie Progress 2
  
• AgieCharmilles Progress VP2 (yr2014-2021)
  

Vertical setup:

• Agie Attak
  
• Agie Celebration 2 (Square)
  
• Agie Challenge 2 (Square)
  
• Agie Classic 2 (Square)
  
• Agie Evolution 2 (Square)
  
• Agie Excellence 2 (Square)
  
• Agie Progress 2
  

Product Details:

System 3R compatible MaxxMacro MXRuler WEDM Reference elements have been developed to incorporate a dovetail-shaped reference element for machines with a parallel or U-shaped machine table, as well as for machines with a frame table. This reference element is compatible with the MXRuler System as well as the full System 3R compatible MaxxMacro WEDM system, which includes a wide range of accessories for clamping various workpieces, positioning them on the machine zero line, without the risk of collision.

The length, hole spacing and hole edge spacing of the hardened reference elements are matched to the machine in question. Due to different shape and size of supporting tables made available, these reference rails are most often adopted to brand and model. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• Adjustable End-Stop: included to enable repeatability.
  
• High quality materials: Full rust proof design.
• MXRuler's Reference Elements are available in various lengths to match different machines. All other sizes are available to quote.
• The dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
  
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler Reference element includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler Reference element (1pc)
• x1 Adjustable End-Stop

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• AgieCharmilles CUT 200 (yr 2012-)
  
• Charmilles RoboFiI 2050
  
• Fanuc alpha C800iB
  
• Mitsubishi MV1200S
  
• Mitsubishi MV4800R
  
• Mitsubishi MV4800S
  
• Mitsubishi MX900
  
• Mitsubishi NA12
  
• Mitsubishi NA1200
  
• Mitsubishi NA1200P
  
• Mitsubishi PA10
  
• Mitsubishi QA10
  
• Mitsubishi SX1
  
• Mitsubishi SX10
  
• ONA AE300
  
• ONA AX3
  

Vertical setup:

• AgieCharmilles CUT 30P (yr 2012-)
  
• AgieCharmilles CUT C 600
  
• AgieCharmilles CUT E 600
  
• Charmilles RoboFiI 2050
  
• Charmilles RoboFil 6040
  
• Charmilles RoboFil 6050
  
• Excetek V850G
  
• Fanuc alpha C600iA
  
• Fanuc alpha C600iB
  
• Fanuc alpha C600iC
  
• Mitsubishi MV2400S
  
• Mitsubishi MX600
  
• Mitsubishi MX900
  
• Mitsubishi BA24
  
• Mitsubishi NA24
  
• Mitsubishi NA2400
  
• Mitsubishi NA2400P
  
• Mitsubishi PA10
  
• Mitsubishi QA10
  
• Sodick VZ500L
  
• ONA AE400
  
• ONA AX4
  

Product Details:

System 3R compatible MaxxMacro MXRuler WEDM Reference elements have been developed to incorporate a dovetail-shaped reference element for machines with a parallel or U-shaped machine table, as well as for machines with a frame table. This reference element is compatible with the MXRuler System as well as the full System 3R compatible MaxxMacro WEDM system, which includes a wide range of accessories for clamping various workpieces, positioning them on the machine zero line, without the risk of collision.

The length, hole spacing and hole edge spacing of the hardened reference elements are matched to the machine in question. Due to different shape and size of supporting tables made available, these reference rails are most often adopted to brand and model. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• Adjustable End-Stop: included to enable repeatability.
  
• High quality materials: Full rust proof design.
• MXRuler's Reference Elements are available in various lengths to match different machines. All other sizes are available to quote.
• The dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
  
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler Reference element includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler Reference element (1pc)
• x1 Adjustable End-Stop

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Makino U86 (L-shape)
  
• ONA AF60
  
• ONA AV60
  
• ONA AX6
  
• Chmer 432S
  

Vertical setup:

• Makino PX36
  
• Makino UP6
  
• ONA AF60
  
• ONA AV60
  
• ONA AX6
  

Product Details:

System 3R compatible MaxxMacro MXRuler WEDM Reference elements have been developed to incorporate a dovetail-shaped reference element for machines with a parallel or U-shaped machine table, as well as for machines with a frame table. This reference element is compatible with the MXRuler System as well as the full System 3R compatible MaxxMacro WEDM system, which includes a wide range of accessories for clamping various workpieces, positioning them on the machine zero line, without the risk of collision.

The length, hole spacing and hole edge spacing of the hardened reference elements are matched to the machine in question. Due to different shape and size of supporting tables made available, these reference rails are most often adopted to brand and model. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• Adjustable End-Stop: included to enable repeatability.
  
• High quality materials: Full rust proof design.
• MXRuler's Reference Elements are available in various lengths to match different machines. All other sizes are available to quote.
• The dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
  
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler Reference element includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler Reference element (1pc)
• x1 Adjustable End-Stop

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

Vertical setup:

Product Details:

System 3R compatible MaxxMacro MXRuler WEDM Reference elements have been developed to incorporate a dovetail-shaped reference element for machines with a parallel or U-shaped machine table, as well as for machines with a frame table. This reference element is compatible with the MXRuler System as well as the full System 3R compatible MaxxMacro WEDM system, which includes a wide range of accessories for clamping various workpieces, positioning them on the machine zero line, without the risk of collision.

The length, hole spacing and hole edge spacing of the hardened reference elements are matched to the machine in question. Due to different shape and size of supporting tables made available, these reference rails are most often adopted to brand and model. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• Adjustable End-Stop: included to enable repeatability.
  
• High quality materials: Full rust proof design.
• MXRuler's Reference Elements are available in various lengths to match different machines. All other sizes are available to quote.
• The dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
  
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler Reference element includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler Reference element (1pc)
• x1 Adjustable End-Stop

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Product Details:

System 3R compatible MaxxMacro MXRuler WEDM Reference elements have been developed to incorporate a dovetail-shaped reference element for machines with a parallel or U-shaped machine table, as well as for machines with a frame table. This reference element is compatible with the MXRuler System as well as the full System 3R compatible MaxxMacro WEDM system, which includes a wide range of accessories for clamping various workpieces, positioning them on the machine zero line, without the risk of collision.

The length, hole spacing and hole edge spacing of the hardened reference elements are matched to the machine in question. Due to different shape and size of supporting tables made available, these reference rails are most often adopted to brand and model. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• Adjustable End-Stop: included to enable repeatability.
  
• High quality materials: Full rust proof design.
• MXRuler's Reference Elements are available in various lengths to match different machines. All other sizes are available to quote.
• The dovetail reference elements serve to mount not only the ruler. Check out the full range of accessories here: System 3R compatible MaxxMacro WEDM Accessories and Vises
  
• Check out our System 3R compatible MaxxMacro MXRuler Basic Set Up video: System 3R compatible MaxxMacro Wire EDM Basic Setup Ruler Vise and WEDM Kit

Included Items

The System 3R compatible MaxxMacro MXRuler Reference element includes the following items:

• x1 System 3R compatible MaxxMacro MXRuler Reference element (1pc)
• x1 Adjustable End-Stop

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

Vertical setup:

Product Details: