Chucking

MaxxMacro 70 Pneumatic Chuck Internal Repair Kit includes O'rings, springs, bearings.

MaxxMacro 70 Manual QuickChuck Low Profile Repair Kit Rust Proof

MaxxMacro 54 Multi 4 QuickChuck Chuck Precision Rail Rust Proof Precision rail with multiple chucks for easier installation and a more space-saving setup.

MaxxDesign Exclusive Features:

• Full rust-proof construction including chuck, internals, and 440C rail.
• 100% cross-compatible with OEM system

MaxxMacro 70 Twin Manual Angle Adapter 90 Degree Adapter comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. For horizontal mounting of MaxxMacro holders.

MaxxDesign Exclusive Features:

• Includes two MaxxMacro Manual Chucks
• Positional accuracy to data. 004mm

Product Information:

MaxxMacro 70 Twin Manual Angle Adapter 90 Degree Adapter allows user to quickly go from vertical to horizontal position while maintaining location and accuracy. Rounded corners allowing closer access to burn locations without the worry of corners tagging.

MaxxMacro 70 Twin Manual Angle Adapter 90 Degree Adapter comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. For horizontal mounting of MaxxMacro holders.

MaxxDesign Exclusive Features:

• Includes two MaxxMacro Manual Chucks
• Positional accuracy to data. 004mm

Product Information:

MaxxMacro 70 Twin Manual Angle Adapter 90 Degree Adapter allows user to quickly go from vertical to horizontal position while maintaining location and accuracy. Rounded corners allowing closer access to burn locations without the worry of corners tagging.

MaxxMacro 54 Manual QuickChuck Chuck with WEDM Adapter comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. To transition from the MaxxMacro WEDM Mounting Head system to a MaxxMacro 54 Quickchuck, the setup sits just above the zero line on Wire EDM machines.

MaxxDesign Exclusive Features:

• Rust Proof design suited for submerged.
• QuickChuck bar action for fast, manual fixture changes

MaxxMacro 54 Manual QuickChuck Chuck with WEDM Adapter comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. To transition from the MaxxMacro WEDM Mounting Head system to a MaxxMacro 54 Quickchuck, the setup sits just above the zero line on Wire EDM machines.

MaxxDesign Exclusive Features:

• Rust Proof design suited for submerged.
• QuickChuck bar action for fast, manual fixture changes

MaxxMacro 70 Multi 3 Manual Chuck Precision Rail comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Precision rail with multiple chucks for easier installation and a more space-saving setup.

MaxxDesign Exclusive Features:

• High quality materials: Chuck is 440C and rail is 420.
• 100% cross-compatible with OEM system

MaxxMacro 54 Manual QuickChuck Chuck with WEDM Adapter comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. To transition from the MaxxMacro WEDM Mounting Head system to a MaxxMacro 54 Quickchuck, the setup sits just above the zero line on Wire EDM machines.

MaxxDesign Exclusive Features:

• Rust Proof design suited for submerged.
• QuickChuck bar action for fast, manual fixture changes

MaxxMacro 54 Manual QuickChuck Chuck with WEDM Adapter comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. To transition from the MaxxMacro WEDM Mounting Head system to a MaxxMacro 54 Quickchuck, the setup sits just above the zero line on Wire EDM machines.

MaxxDesign Exclusive Features:

• Rust Proof design suited for submerged.
• QuickChuck bar action for fast, manual fixture changes

MaxxMacro 54 Manual QuickChuck Chuck with WEDM Adapter comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. To transition from the MaxxMacro WEDM Mounting Head system to a MaxxMacro 54 Quickchuck, the setup sits just above the zero line on Wire EDM machines.

MaxxDesign Exclusive Features:

• Rust Proof design suited for submerged.
• QuickChuck bar action for fast, manual fixture changes

MaxxMacro 70 Multi 3 Manual Chuck Precision Rail comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Precision rail with multiple chucks for easier installation and a more space-saving setup.

MaxxDesign Exclusive Features:

• High quality materials: Chuck is 440C and rail is 420.
• 100% cross-compatible with OEM system

MaxxMacro 54 Manual QuickChuck Chuck with WEDM Adapter comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. To transition from the MaxxMacro WEDM Mounting Head system to a MaxxMacro 54 Quickchuck, the setup sits just above the zero line on Wire EDM machines.

MaxxDesign Exclusive Features:

• Rust Proof design suited for submerged.
• QuickChuck bar action for fast, manual fixture changes

MaxxMacro 70 Low Profile Manual Chuck with Mounting Plate comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Rust resistant chuck with adapter plate.

MaxxDesign Exclusive Features:

• Low Profile design.
• Versatile mounting plate.

Product Information:

MaxxMacro 70 Low Profile Manual Chuck with Mounting Plate is specifically designed to be quickly mounted to any CNC machine table. MaxxMacro 70 Low Profile Manual Chuck with Mounting Plate does not require and special plate or fixture to mount securely to your machine.

MaxxMagnum Manual Chuck Low Profile 68024 Rust Proof Index Disabled comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Low profile manual chuck for permanent mounting, with index disabled.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

MaxxMagnum Manual Chuck Low Profile 68024 Rust Proof Index Disabled is 100% cross compatible with System 3R 3R-680.24-S, 3R-680.24RS and 3R-90809.02 Macro Magnum Chucks and Magnum products. MaxxMagnum Manual Chuck Low Profile 68024 Rust Proof is rust resistant and provides the best balance of durability, accuracy and design. Includes index disables to ensure correct positioning, designed to work with the MaxxMagnum 142 Pallet MM68171 Reference Element Index Disabled and MaxxMacro 70 Stainless Performance Rust Proof Pallet Index Disabled. Does not include sealing ring, we offer it as s spare item.

MaxxMacro 70 Multi 3 Manual Chuck Precision Rail comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Precision rail with multiple chucks for easier installation and a more space-saving setup.

MaxxDesign Exclusive Features:

• High quality materials: Chuck is 440C and rail is 420.
• 100% cross-compatible with OEM system

MaxxMacro 54 Multi 6 QuickChuck Chuck Precision Rail comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Precision rail with multiple chucks for easier installation and a more space-saving setup.

MaxxDesign Exclusive Features:

• Multi-Chuck Rail System allows simultaneous actuation.
• 100% cross-compatible with MaxxMacro 54 and OEM System

MaxxMacro 54 Manual QuickChuck Chuck with WEDM Adapter comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. To transition from the MaxxMacro WEDM Mounting Head system to a MaxxMacro 54 Quickchuck, the setup sits just above the zero line on Wire EDM machines.

MaxxDesign Exclusive Features:

• Rust Proof design suited for submerged.
• QuickChuck bar action for fast, manual fixture changes

MaxxMacro 70 Low Profile Manual Chuck with Mounting Plate comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Rust resistant chuck with adapter plate.

MaxxDesign Exclusive Features:

• Low Profile design.
• Versatile mounting plate.

Product Information:

MaxxMacro 70 Low Profile Manual Chuck with Mounting Plate is specifically designed to be quickly mounted to any CNC machine table. MaxxMacro 70 Low Profile Manual Chuck with Mounting Plate does not require and special plate or fixture to mount securely to your machine.

MaxxMagnum Manual Chuck Low Profile 68024 Rust Proof Index Disabled comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Low profile manual chuck for permanent mounting, with index disabled.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

MaxxMagnum Manual Chuck Low Profile 68024 Rust Proof Index Disabled is 100% cross compatible with System 3R 3R-680.24-S, 3R-680.24RS and 3R-90809.02 Macro Magnum Chucks and Magnum products. MaxxMagnum Manual Chuck Low Profile 68024 Rust Proof is rust resistant and provides the best balance of durability, accuracy and design. Includes index disables to ensure correct positioning, designed to work with the MaxxMagnum 142 Pallet MM68171 Reference Element Index Disabled and MaxxMacro 70 Stainless Performance Rust Proof Pallet Index Disabled. Does not include sealing ring, we offer it as s spare item.

MaxxMacro 70 Multi 3 Manual Chuck Precision Rail comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Precision rail with multiple chucks for easier installation and a more space-saving setup.

MaxxDesign Exclusive Features:

• High quality materials: Chuck is 440C and rail is 420.
• 100% cross-compatible with OEM system

MaxxMacro 54 Multi 6 QuickChuck Chuck Precision Rail comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Precision rail with multiple chucks for easier installation and a more space-saving setup.

MaxxDesign Exclusive Features:

• Multi-Chuck Rail System allows simultaneous actuation.
• 100% cross-compatible with MaxxMacro 54 and OEM System

MaxxMacro 70 Stainless Mounting Plate for Low Profile Manual Chuck comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• High quality materials: Full stainless steel design.
• Chuck not included

Product Information:

For chuck: MM-MK70R000 (MX-6004-70RS) MaxxMacro 70 Low Profile Manual Chuck Rust Proof WEDM

MaxxMacro 54 Manual QuickChuck Chuck with WEDM Adapter comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. To transition from the MaxxMacro WEDM Mounting Head system to a MaxxMacro 54 Quickchuck, the setup sits just above the zero line on Wire EDM machines.

MaxxDesign Exclusive Features:

• Rust Proof design suited for submerged.
• QuickChuck bar action for fast, manual fixture changes

MaxxMacro 70 Manual QuickChuck Low Profile Chuck Rust Proof for Reference Element comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. QuickChuck adapter for MaxxMacro holder in the WEDM system.

MaxxDesign Exclusive Features:

• Rust Proof design suited for submerged.
• QuickChuck bar action for fast, manual fixture changes

Product Information:

Note: When mounted on the reference element, the two clamping jaws must be tightened with the same torque, 4 Nm.

MaxxMacro 70 Low Profile Manual Chuck with Mounting Plate comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Rust resistant chuck with adapter plate.

MaxxDesign Exclusive Features:

• Low Profile design.
• Versatile mounting plate.

Product Information:

MaxxMacro 70 Low Profile Manual Chuck with Mounting Plate is specifically designed to be quickly mounted to any CNC machine table. MaxxMacro 70 Low Profile Manual Chuck with Mounting Plate does not require and special plate or fixture to mount securely to your machine.

MaxxMagnum Manual Chuck Low Profile 68024 Rust Proof Index Disabled comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Low profile manual chuck for permanent mounting, with index disabled.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

MaxxMagnum Manual Chuck Low Profile 68024 Rust Proof Index Disabled is 100% cross compatible with System 3R 3R-680.24-S, 3R-680.24RS and 3R-90809.02 Macro Magnum Chucks and Magnum products. MaxxMagnum Manual Chuck Low Profile 68024 Rust Proof is rust resistant and provides the best balance of durability, accuracy and design. Includes index disables to ensure correct positioning, designed to work with the MaxxMagnum 142 Pallet MM68171 Reference Element Index Disabled and MaxxMacro 70 Stainless Performance Rust Proof Pallet Index Disabled. Does not include sealing ring, we offer it as s spare item.

MaxxMacro 70 Multi 3 Manual Chuck Precision Rail comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Precision rail with multiple chucks for easier installation and a more space-saving setup.

MaxxDesign Exclusive Features:

• High quality materials: Chuck is 440C and rail is 420.
• 100% cross-compatible with OEM system

MaxxMacro 54 Multi 6 QuickChuck Chuck Precision Rail comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Precision rail with multiple chucks for easier installation and a more space-saving setup.

MaxxDesign Exclusive Features:

• Multi-Chuck Rail System allows simultaneous actuation.
• 100% cross-compatible with MaxxMacro 54 and OEM System

MaxxMacro 70 Multi 4 Pneumatic Chuck 6001030 System comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Precision rail with multiple chucks for easier installation and a more space-saving setup.

MaxxDesign Exclusive Features:

• Multi-Chuck Rail System allows simultaneous actuation.
• Air Clean function of Z pads

Product Information:

The MaxxMacro 70 Multi 4 Pneumatic Chuck 6001030 System delivers high-performance precision and accuracy for diverse machining applications. It is 100% cross-compatible with System 3R Macro, allowing seamless integration into existing setups. At its core is the Pneumatic 6001030 Chuck, equipped with an Air Clean function to keep the chucks free of dust and debris, ensuring a cleaner and more efficient machining process. The chucks operate as a synchronized system for consistent, reliable performance, while also offering customization options to suit various project requirements. Ideal for both small and large-scale machining, the MaxxMacro 70 Multi Chuck Rail System provides the precision, reliability, and flexibility manufacturers need to achieve exceptional results every time.

MaxxMacro 70 Manual QuickChuck Low Profile Chuck Rust Proof for Reference Element comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. QuickChuck adapter for MaxxMacro holder in the WEDM system.

MaxxDesign Exclusive Features:

• Rust Proof design suited for submerged.
• QuickChuck bar action for fast, manual fixture changes

Product Information:

Note: When mounted on the reference element, the two clamping jaws must be tightened with the same torque, 4 Nm.

MaxxMacro 70 Low Profile Manual Chuck with Mounting Plate comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Rust resistant chuck with adapter plate.

MaxxDesign Exclusive Features:

• Low Profile design.
• Versatile mounting plate.

Product Information:

MaxxMacro 70 Low Profile Manual Chuck with Mounting Plate is specifically designed to be quickly mounted to any CNC machine table. MaxxMacro 70 Low Profile Manual Chuck with Mounting Plate does not require and special plate or fixture to mount securely to your machine.

MaxxMagnum Manual Chuck Low Profile 68024 Rust Proof Index Disabled comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Low profile manual chuck for permanent mounting, with index disabled.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

MaxxMagnum Manual Chuck Low Profile 68024 Rust Proof Index Disabled is 100% cross compatible with System 3R 3R-680.24-S, 3R-680.24RS and 3R-90809.02 Macro Magnum Chucks and Magnum products. MaxxMagnum Manual Chuck Low Profile 68024 Rust Proof is rust resistant and provides the best balance of durability, accuracy and design. Includes index disables to ensure correct positioning, designed to work with the MaxxMagnum 142 Pallet MM68171 Reference Element Index Disabled and MaxxMacro 70 Stainless Performance Rust Proof Pallet Index Disabled. Does not include sealing ring, we offer it as s spare item.

MaxxMacro 70 Multi 3 Manual Chuck Precision Rail comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Precision rail with multiple chucks for easier installation and a more space-saving setup.

MaxxDesign Exclusive Features:

• High quality materials: Chuck is 440C and rail is 420.
• 100% cross-compatible with OEM system

MaxxMacro 54 Multi 6 QuickChuck Chuck Precision Rail comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Precision rail with multiple chucks for easier installation and a more space-saving setup.

MaxxDesign Exclusive Features:

• Multi-Chuck Rail System allows simultaneous actuation.
• 100% cross-compatible with MaxxMacro 54 and OEM System

MaxxMacro 70 Multi 4 Pneumatic Chuck 6001030 System comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Precision rail with multiple chucks for easier installation and a more space-saving setup.

MaxxDesign Exclusive Features:

• Multi-Chuck Rail System allows simultaneous actuation.
• Air Clean function of Z pads

Product Information:

The MaxxMacro 70 Multi 4 Pneumatic Chuck 6001030 System delivers high-performance precision and accuracy for diverse machining applications. It is 100% cross-compatible with System 3R Macro, allowing seamless integration into existing setups. At its core is the Pneumatic 6001030 Chuck, equipped with an Air Clean function to keep the chucks free of dust and debris, ensuring a cleaner and more efficient machining process. The chucks operate as a synchronized system for consistent, reliable performance, while also offering customization options to suit various project requirements. Ideal for both small and large-scale machining, the MaxxMacro 70 Multi Chuck Rail System provides the precision, reliability, and flexibility manufacturers need to achieve exceptional results every time.

MaxxMacro 70 Stainless Mounting Plate for Low Profile Manual Chuck comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• High quality materials: Full stainless steel design.
• Chuck not included

Product Information:

For chuck: MM-MK70R000 (MX-6004-70RS) MaxxMacro 70 Low Profile Manual Chuck Rust Proof WEDM

MaxxMacro 54 Manual QuickChuck Chuck with WEDM Adapter comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. To transition from the MaxxMacro WEDM Mounting Head system to a MaxxMacro 54 Quickchuck, the setup sits just above the zero line on Wire EDM machines.

MaxxDesign Exclusive Features:

• Rust Proof design suited for submerged.
• QuickChuck bar action for fast, manual fixture changes

MaxxMacro 70 Pneumatic Chuck 600863 Machine-Adapted WEDM comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Pneumatic chuck for permanent mounting in the machine spindle.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

The MaxxMacro Chuck 600863 Pneumatic Machine-Adapted Chuck is 100% cross-compatible with the System 3R 3R-600.86-30 Pneumatic Chuck. It is rust-proof, corrosion-resistant, and features fixed index positions at 4x90º.

MaxxMacro 54 Multi 5 QuickChuck Chuck Precision Rail comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Precision rail with multiple chucks for easier installation and a more space-saving setup.

MaxxDesign Exclusive Features:

• Multi-chuck system on a common mounting plate for compact setups.
• Supports multiple operations to increase productivity.

MaxxMacro 54 Manual Chuck with Flange 60023 Rust Proof comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Cast chuck with mounting flange for mounting on the machine spindle or in a fixture.

MaxxDesign Exclusive Features:

• Includes flange
• Rust-resistant stainless steel body.

Product Information:

MaxxMacro 54 Manual Chuck with Flange 60023 Rust Proof is a rust-resistant, cast stainless steel chuck built for permanent mounting on a machine spindle. Its precision-ground back face ensures accurate installation, while the integrated mounting flange supports standard Macro holders. Designed for manual operation, it features four fixed index positions (4×90°).

MaxxMagnum Manual Chuck Low Profile 68024V Table Haas TR210 comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

MaxxMagnum Chuck 68024V Low Profile Manual Table Chuck Haas TR210 is 100% cross compatible with System 3R Macro Magnum Chucks and Magnum products. The MaxxMagnum HP Low Profile Stainless Manual Chuck provides the best balance of durability , accuracy and design. Adapter plate for the 210mm Platter of HAAS TR210 (2022). In the attached drawing, you can see the chuck mounted onto the Platter. Repeatability: 0.002 mm (0.00008“) Does not include sealing ring, we offer it as s spare item.

MaxxMagnum Manual Chuck Low Profile 68024V Table Haas TRT160 comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• 100% cross-compatible with OEM system
• Direct fit on HAAS TRT160 hole platter

Product Information:

The MaxxMagnum Manual Chuck Low Profile 68024V is a high-performance stainless steel manual chuck designed for direct mounting on the hole platter of the HAAS TRT160 (2022–2025). Engineered for maximum durability and precision, it is fully cross-compatible with System 3R Macro Magnum chucks and accessories. Its low-profile design ensures rigidity and optimized workspace, making it ideal for demanding 5-axis machining setups. Note: The sealing ring is not included but is available as a spare part. Adapter plate for the Hole Platter of HAAS TR160 (2022-2025). Does not include sealing ring, we offer it as a spare item.

MaxxMacro 70 Twin Pneumatic Low Profile Chuck 30210 Rust Proof comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Pneumatic chuck for MaxxMacro or MaxxMacroTwin. Horizontal mounting on the machine table.

MaxxDesign Exclusive Features:

• Twin Pneumatic Chuck with High Clamping Force
• Air-blast cleaning for Z-reference surfaces

Product Information:

Experience effortless, precise machining with the MaxxMacro 70 Twin Pneumatic Low Profile Chuck 30210 Rust Proof. Fully 100% cross-compatible with System 3R models 3R-602.10-1, 3R-602.12-1, and 3R-602.12-1K, this chuck features horizontal mounting to reduce setup time and costs. Its quick-change design enables fast, safe, and high-precision operations, ideal for demanding applications. The chuck includes air-blast cleaning for Z-reference surfaces to ensure accurate positioning and offers a powerful clamping force of 2 × 6700 N for secure workholding.

MaxxMacro 54 to Maxx-ER Rapid-action Pneumatic Chuck 007625 System Adapter comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Pneumatic adapter for easy transition from MaxxMacro to Maxx-ER.

MaxxDesign Exclusive Features:

• Includes Pneumatic Rapid Action Chuck
• 100% cross-compatible with System 3R and Erowa ITS systems

Product Information:

MaxxMacro 54 to Maxx-ER Rapid-action Pneumatic Chuck 007625 Adapter is 100% cross compatible with Erowa Rapid Action Pnuematic EDM Chuck ER-007625 and with System 3R Macro system.

MaxxMacro 70 Twin Manual Angle Adapter 90 Degree Adapter Rust Proof WEDM comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. For horizontal mounting of MaxxMacro holders. Rust resistant.

MaxxDesign Exclusive Features:

• Includes two MaxxMacro Manual Chucks, full rust-proof construction for Wire EDM environments.
• Positional accuracy to data. 004mm

Product Information:

MaxxMacro 70 Twin Manual Angle Adapter 90 Degree Adapter allows user to quickly go from vertical to horizontal position while maintaining location and accuracy. Rounded corners allowing closer access to burn locations without the worry of corners tagging.

MaxxMacro 70 WEDM Horizontal Pneumatic Chuck RSM 600143 comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Horizontal pneumatic chuck for permanent mounting on the machine table.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

MaxxMacro 70 Pneumatic Chuck 60281 Internal Repair Kit Rust Proof. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

Rust resistant internal replacement kit for MaxxMacro Chucks. Kit includes stainless springs, stainless bearings and o'rings. For chucks: MM-PKLPR000 (MX-60281) MM-PKLPR000D (MX-60281-ID) MM-PKMPR001 MM-PL70R000 (MX-602101)

MaxxTooling Stainless ER32 Collet Replacement Locking Nut Rust Proof can be used to complement products and product lines for various systems, such as MaxxMacro, Maxx-ER, and OEM manufacturers like System 3R and Erowa. Locking Nut for MaxxMacro collet chucks. Chrome finish, rust-proof. Fits all MaxxMacro ER32 chucks.

MaxxDesign Exclusive Features:

• Rust-proof chrome finish for long-term corrosion resistance
• Compatible with all MaxxMacro and Maxx-ER ER32 collet chucks

Product Information:

The MaxxTooling Stainless ER32 Collet Replacement Locking Nut Rust Proof is a high-quality replacement nut designed to ensure secure and accurate performance of your MaxxMacro and Maxx-ER ER32 collet chucks. Engineered for durability, this locking nut features a rust-proof, corrosion-resistant chrome finish and is fully compatible with all MaxxMacro ER32 collet chuck systems.

Made from high-strength 4CR13 SUS stainless steel, it delivers long-lasting reliability even in demanding machining environments.

MaxxMacro 70 Pneumatic Low Profile Chuck Rust Proof WEDM Disable Index comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Pneumatic chuck for permanent mounting on the machine table with index-disable feature.

MaxxDesign Exclusive Features:

• Disable Index system.
• Full 440C stainless steel construction and rust-proof mechanism.

Product Information:

MaxxMacro Chuck 60281 is a low-profile pneumatic chuck engineered for permanent installation on machine tables in both Wire EDM and CNC machining environments. This chuck features a Disable Index system with a male-female interface that helps prevent contamination from chips and debris. An evacuation hole is located between the two pneumatic ports—always ensure the SSFP (sealing screw flat point) is securely installed to maintain proper sealing and prevent air pressure loss during operation.

MaxxMacro 70 Multi 3 Pneumatic Chuck 6001030 Precision Rail comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Precision rail with multiple chucks for easier installation and a more space-saving setup.

MaxxDesign Exclusive Features:

• Multi-Chuck Rail System allows simultaneous actuation.
• Air Clean function of Z pads

Product Information:

The MaxxMacro 70 Multi 3 Pneumatic Chuck 6001030 Precision Rail delivers high-performance precision and accuracy for diverse machining applications. It is 100% cross-compatible with System 3R Macro, allowing seamless integration into existing setups. At its core is the Pneumatic 6001030 Chuck, equipped with an Air Clean function to keep the chucks free of dust and debris, ensuring a cleaner and more efficient machining process. The chucks operate as a synchronized system for consistent, reliable performance, while also offering customization options to suit various project requirements. Ideal for both small and large-scale machining, the MaxxMacro 70 Multi Chuck Rail System provides the precision, reliability, and flexibility manufacturers need to achieve exceptional results every time.

MaxxMacro 70 Pneumatic Spindle Chuck 90957 80mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Pneumatic chuck for permanent mounting in the machine spindle.

MaxxDesign Exclusive Features:

• Designed for permanent mounting on the machine’s spindle.
• Includes Turbo clamping function.

Product Information:

The MaxxMacro 90957 Spindle Chuck is an automatic spindle chuck for the MaxxMacro system, 100% cross-compatible with the System 3R Macro tooling system. The chuck is designed for permanent mounting on the machine’s spindle. All connections are from the back of the chuck, including unclamp and Turbo. It features a hardened XY-reference, clamping with spring pressure and a “Turbo function,” and unclamping with air pressure.

MaxxMacro 70 Multi 5 Pneumatic Chuck 6001030 Precision Rail comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Precision rail with multiple chucks for easier installation and a more space-saving setup.

MaxxDesign Exclusive Features:

• Multi-Chuck Rail System allows simultaneous actuation.
• Air Clean function of Z pads

Product Information:

The MaxxMacro 70 Multi 5 Pneumatic Chuck 6001030 Precision Rail delivers high-performance precision and accuracy for diverse machining applications. It is 100% cross-compatible with System 3R Macro, allowing seamless integration into existing setups. At its core is the Pneumatic 6001030 Chuck, equipped with an Air Clean function to keep the chucks free of dust and debris, ensuring a cleaner and more efficient machining process. The chucks operate as a synchronized system for consistent, reliable performance, while also offering customization options to suit various project requirements. Ideal for both small and large-scale machining, the MaxxMacro 70 Multi Chuck Rail System provides the precision, reliability, and flexibility manufacturers need to achieve exceptional results every time.

MaxxMacro 70 Aluminum Low Profile Manual Chuck Extension 12" comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Vertical extension with manual chuck.

MaxxDesign Exclusive Features:

• Precision ground to ensure uniform height. This guarantees that when using multiple extensions, they all have the same height.
• Height accuracy is 0.008 mm (0.0003"), and XY accuracy is 0.002 mm.

MaxxMacro 70 Pneumatic Chuck 6001030 with Universal Mounting Plate comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Pneumatic chuck for permanent mounting on the machine table with universal mounting plate.

MaxxDesign Exclusive Features:

• Universal mounting base ideal for 5th axis or B axis motors.
• Z-Pads Air Clean function.

MaxxMacro 54 Manual Chuck 60023 QuickChuck Repair Kit Rust Proof. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• High quality materials.
• Internal Repair kit

Product Information:

Includes: Locking Ring 4 Bearings 2 Springs 4 Retainer set screw

MaxxMacro 54 Manual Angle Adapter 90 Degree Rust Proof WEDM comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Rust-resistant 90-degree manual chuck, designed for mounting on a 54 WEDM chuck and positioned just above the zero line.

MaxxDesign Exclusive Features:

• Includes a MaxxMacro 54 Performance Pallet
• Allows for mounting Macro fixtures just above the zero line of Wire EDM machines.

Product Information:

MaxxMacro 54 Manual Angle Adapter 90 Degree Rust Proof WEDM is specifically designed for mounting MaxxMacro holders at a 90º angle in the MaxxMacro system, just above the zero line of Wire EDM machines. This setup helps avoid collisions while maximizing available space.

MaxxTooling Stainless ER40 Collet Replacement Locking Nut can be used to complement products and product lines for various systems, such as MaxxMacro, Maxx-ER, and OEM manufacturers like System 3R and Erowa.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

MaxxMacro 54 ER40 Collet Chuck Locking Nut replacement nut for MaxxMacro Collet Chuck, ensuring secure and accurate operation. This nut works on all MaxxMacro, Maxx-ER - ER40 Collet chucks.

MaxxMacro 70 Pneumatic Table Chuck Performance comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Pneumatic chuck locked/opened with air gun.

MaxxDesign Exclusive Features:

• Vibration-damped chuck.
• Air-blast cleaning of the Z-references and turbo locking feature.

MaxxMacro 70 Pneumatic Chuck 600863 Machine-Adapted comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Pneumatic chuck for permanent mounting in the machine spindle.

MaxxDesign Exclusive Features:

• High quality materials.
• Side pneumatic ports.

Product Information:

MaxxMacro 70 Pneumatic Chuck 600863 Machine-Adapted is 100% cross compatible with System 3R 3R-600.86-30 Pneumatic chuck. Available also in WEDM version.

MaxxMagnum Manual Chuck Low Profile 68024V Table comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Low profile manual chuck with adapter plate.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

MaxxMagnum Manual Chuck Low Profile 68024V Table is 100% cross compatible with System 3R Macro Magnum Chucks and Magnum products. Repeatability: 0.002 mm MaxxMagnum Manual Chuck Low Profile 68024V Table provides the best balance of durability , accuracy and design. Repeatability: 0.002 mm (0.00008“) Does not include sealing ring, we offer it as s spare item.

MaxxMagnum Pneumatic Chuck Manual Short Drawbar 680102 comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Pneumatic table chuck.

MaxxDesign Exclusive Features:

• Includes Air-blast cleaning of the Z-references
• 100% cross-compatible with OEM system

Product Information:

MaxxMagnum Pneumatic Chuck is 100% cross compatible with System 3R 3R-680.10-2 3R-680.19-2 3R-680.10-2A Macro Magnum Pneumatic chucks. The MaxxMagnum chucks are rust resistant and provides the best balance of durability , accuracy and design. Repeatability: 0.002 mm (0.00008“) Does not include the sealing ring; we offer it as a spare item.

MaxxMacro 70 Multi 6 Pneumatic Chuck 6001030 System comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Precision rail with multiple chucks for easier installation and a more space-saving setup.

MaxxDesign Exclusive Features:

• Multi-Chuck Rail System allows simultaneous actuation.
• Air Clean function of Z pads

Product Information:

MaxxMacro 70 Multi 6 Pneumatic Chuck 6001030 System delivers high-performance precision and accuracy for diverse machining applications. It is 100% cross-compatible with System 3R Macro, allowing seamless integration into existing setups. At its core is the Pneumatic 6001030 Chuck, equipped with an Air Clean function to keep the chucks free of dust and debris, ensuring a cleaner and more efficient machining process. The chucks operate as a synchronized system for consistent, reliable performance, while also offering customization options to suit various project requirements. Ideal for both small and large-scale machining, the MaxxMacro 70 Multi Chuck Rail System provides the precision, reliability, and flexibility manufacturers need to achieve exceptional results every time.

MaxxMagnum Manual Chuck Integrated Sealing Ring Spare Part comes fully assembled and ready to use.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

MaxxMagnum Chuck Integrated anti debris sealing ring helps prevent debris and contamination of mating surfaces during machining processes. Works on all MaxxMagnum Manual chucks purchased after June 22, 2022. Chucks prior to that date will require modifications (please contact us for details or if you are unsure in your chuck is compatible). We can retrofit your MaxxMagnum chuck to accept these new aluminum body anti debris sealing ring *Chuck not included; shown with chuck MM-MGMGS000

MaxxMagnum Pneumatic Chuck Integrated Sealing Ring Spare Part comes fully assembled and ready to use.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

MaxxMagnum Chuck Integrated anti debris sealing ring helps prevent debris and contamination of mating surfaces during machining processes. Works on all MaxxMagnum Pneumatic chucks purchased after June 22, 2022. Chucks prior to that date will require modifications (please contact us for details or if you are unsure in your chuck is compatible). We can retrofit your MaxxMagnum chuck to accept these new aluminum body anti debris sealing ring *Chuck not included; shown with chuck MM-PDMGS000

MaxxMacro 70 Low Profile Manual Chuck 60028 Corrosion Resistant comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Cast chuck with a ground back face for mounting on the machine spindle. Also suitable for use in a fixture on the machine table or with an adapter plate.

MaxxDesign Exclusive Features:

• Low profile design.
• Corrosion Resistant Chuck.

MaxxMacro 70 Low Profile Manual Chuck 60028 with Mounting Plate comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Cast chuck with mounting plate for mounting on the machine table.

MaxxDesign Exclusive Features:

• Includes universal adapter plate with 150mm mounting holes.
• Low profile design.

MaxxTooling Machinists ER40 Collet Spanner Wrench Spare Part can be used to complement products and product lines for various systems, such as MaxxMacro, Maxx-ER, and OEM manufacturers like System 3R and Erowa. Collet Spanner Wrench for opening and closing ER40 collet chucks. Durable and easy to use.

MaxxMacro 70 Pneumatic Chuck 6001030 with Mounting Plate WEDM comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Rust proof pneumatic chuck for permanent mounting on the machine table.

MaxxDesign Exclusive Features:

• Mounting Plate with adjustable jack screws for easy alignment and setup.
• Z-Pads Air Clean function.

Product Information:

The MaxxMacro 70 Pneumatic Chuck 6001030 with Mounting Plate WEDM is designed for high-precision automation and WEDM applications. Fully compatible with System 3R Macro systems, it features an Air Clean function for optimal performance and can be operated using either an air gun or automated switch. This chuck includes a rust-resistant 440C stainless steel 102mm x 102mm base plate and corrosion-resistant internal mechanisms for long-term reliability in demanding environments.

MaxxMagnum 156 Pallet with MaxxMacro 54 Chuck Multi 4 QuickChuck comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. MaxxMagnum to four MaxxMacro 54 QuickChuck, offering better accessibility and faster product changes.

MaxxDesign Exclusive Features:

• Multi-chuck system optimizes space and reduces setup time
• Bar-actuated QuickChucks for fast, reliable clamping

Product Information:

The MaxxMagnum 156 Pallet with MaxxMacro 54 Multi 4 QuickChuck is engineered for durability and precision. Built from a rust-resistant, hardened stainless steel base plate—not cast—the pallet provides long-term stability in demanding environments. It comes equipped with hardened reference elements and four pre-mounted MaxxMacro 54 chucks, making it fully compatible with System 3R Macro Magnum setups and ready for immediate use.

MaxxMacro 54 Manual Angle Adapter 90 Degree Adapter Rust Proof WEDM comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. For horizontal mounting of MaxxMacro holders. Rust resistant.

MaxxDesign Exclusive Features:

• Full rust-proof construction for Wire EDM environments.
• Positional accuracy to data. 004mm

Product Information:

MaxxMacro 54 Manual Chuck 90 Degree Adapter Rust Proof WEDM allows user to quickly go from vertical to horizontal position while maintaining location and accuracy. Rounded corners allowing closer access to burn locations without the worry of corners tagging.

MaxxMagnum 156 Pallet with MaxxMacro 54 Chuck Manual QuickChuck comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. MaxxMagnum to MaxxMacro 54 QuickChuck, offering better accessibility and faster product changes.

MaxxDesign Exclusive Features:

• Bar-actuated QuickChucks for fast, reliable clamping
• 100% cross-compatible with OEM system

Product Information:

The MaxxMagnum 156 Pallet with one MaxxMacro 54 Manual QuickChuck is engineered for high precision and long-term reliability. Made from a single piece of rust-resistant, hardened stainless steel—not cast—this pallet delivers exceptional durability in demanding environments. It comes fully equipped with one pre-mounted QuickChuck, ready to run out of the box. With 100% cross-compatibility with System 3R Macro products and repeatability of 0.002 mm (0.00008”), this solution is ideal for precision applications requiring stability and accuracy.

MaxxMacro 70 Pneumatic Low Profile Chuck 600143 Rust Proof comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Pneumatic chuck for permanent mounting on the machine table.

MaxxDesign Exclusive Features:

• Mounting holes and side slots for flexible installation.
• Rust-proof system suitable for submerged use.

Product Information:

The MaxxMacro 70 Pneumatic Low Profile Chuck (60143) is a rust-proof, corrosion-resistant solution built for automation and precision. Designed for tight spaces and demanding environments, this pneumatic chuck offers full cross-compatibility with System 3R models 3R-600.14-30, Macro, and 90945.01. Engineered from corrosion-resistant materials, it ensures long-term performance with minimal maintenance.

MaxxMacro 70 Pneumatic Chuck SP7359 Rust Proof comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Pneumatic chuck for building-in, for example in a fixture, dividing head or B-axis.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

MaxxMacro Pneumatic SP7359 Rust Resistant Chuck. 100% cross compatible with System 3R Macro Systems. MaxxMacro Pneumatic SP7359 Pneumatic chuck for building-in, for example in a fixture, dividing head or B-axis.This pneumatic MaxxMacro machine chuck is perfectly suited to your automatic or automation requirements. Similar to 3R-SP24460 3R-SP26771-RS 3R-SP26771 3R-SP7359 3R-SP7359-RS 100% cross compatible with System 3R Macro Systems

MaxxTooling Stainless ER16 Collet Replacement Locking Nut can be used to complement products and product lines for various systems, such as MaxxMacro, Maxx-ER, and OEM manufacturers like System 3R and Erowa. Standard Locking Nut for MaxxMacro collet chucks.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

MaxxMacro 54 ER16 Collet Chuck Locking Nut replacement nut for MaxxMacro Collet Chuck, ensuring secure and accurate operation. This nut works on all MaxxMacro, Maxx-ER - ER16 Collet chucks.

MaxxTooling Stainless ER32 Collet Replacement Locking Nut can be used to complement products and product lines for various systems, such as MaxxMacro, Maxx-ER, and OEM manufacturers like System 3R and Erowa.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

MaxxMacro 54 ER32 Collet Chuck Locking Nut replacement nut for MaxxMacro Collet Chuck, ensuring secure and accurate operation. This nut works on all MaxxMacro, Maxx-ER - ER32 Collet chucks.

MaxxMacro 70 Manual QuickChuck Low Profile Chuck 60227 Rust Proof WEDM comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Manual low-profile quickchuck for Macro

MaxxDesign Exclusive Features:

• Application: WEDM, Milling, Grinding, Layout table , CMM
• Rust-Resistant Construction

Product Information:

The MaxxMacro 70 Manual Low Profile Chuck 60227 Rust Proof WEDM is fully 100% cross-compatible with System 3R 3R-602.27. Designed for versatile use in WEDM, milling, grinding, layout tables, and CMM applications, it ensures precise and stable workholding. The chuck requires the MaxxMacro Performance Manual 60527 Drawbar and delivers a static repeatability accuracy of ±0.002 mm. Its rust-resistant construction guarantees durability in demanding environments.

MaxxMacro 54 Multi 5 QuickChuck Chuck Precision Rail comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Precision rail with multiple chucks for easier installation and a more space-saving setup.

MaxxDesign Exclusive Features:

• Multi-Chuck Rail System allows simultaneous actuation.
• 100% cross-compatible with MaxxMacro 54 and OEM System

MaxxMacro 54 Aluminum Manual Chuck Horizontal Extension 10" comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Horizontal extension with manual chuck.

MaxxDesign Exclusive Features:

• High quality materials: Chuck and Pallet are 440C 57-60HRC rust proof design.
• Extension: Aluminum 10" Center to Center

Product Information:

Note due to the limitations of aluminum it is recommended the user master the extension and adjust provided data once the MaxxMacro Horizontal Chuck Extension is installed on your equipment.

MaxxMacro 54 Aluminum Manual Chuck Horizontal Extension 6.5" comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Horizontal extension with manual chuck.

MaxxDesign Exclusive Features:

• High quality materials: Chuck and Pallet are 440C 57-60HRC rust proof design.
• Extension: Aluminum 6.5" Center to Center

Product Information:

Note due to the limitations of aluminum it is recommended the user master the extension and adjust provided data once the MaxxMacro Horizontal Chuck Extension is installed on your equipment.

MaxxMacro Manual Drawbar 60527 Stainless Performance comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Drawbar compatible with any MaxxMacro pallet. Check the required type for the chuck you are using.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

MaxxMacro Performance Manual 60527 Drawbar Stainless is 100% cross compatible with System 3R Drawbar 3R-605.27 Macro Drawbar. MaxxMacro Performance Manual 60527 Drawbar Stainless includes the plastic clip and are machined ABCD all locations for precision seating of pallet. 100% cross compatible with System 3R Macro Tooling Systems 3R-605.27, 3R-605.27E, 3R-605.27RS, 3R-605.27EE.

MaxxMagnum Pneumatic Chuck Automatic Long Drawbar with Mounting Plate 680103 comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Pneumatic table chuck.

MaxxDesign Exclusive Features:

• Includes Air-blast cleaning of the Z-references
• 100% cross-compatible with OEM system

Product Information:

MaxxMagnum Pneumatic Chuck Automatic Long Drawbar with Mounting Plate 680103 is 100% cross compatible with System 3R 3R-680.10-3 Macro Magnum Low Profile Pneumatic Chuck. MaxxMagnum Pneumatic Chuck Automatic Long Drawbar with Mounting Plate 680103 is rust resistant and provides the best balance of durability , accuracy and design. Repeatability: 0.002 mm (0.00008“) Does not include the sealing ring; we offer it as a spare item.

MaxxTooling Machinists ER32 Collet Spanner Wrench Spare Part can be used to complement products and product lines for various systems, such as MaxxMacro, Maxx-ER, and OEM manufacturers like System 3R and Erowa. Collet Spanner Wrench for opening and closing ER32 collet chucks. Durable and easy to use.

MaxxMacro 54 Multi 3 QuickChuck Chuck Precision Rail comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Precision rail with multiple chucks for easier installation and a more space-saving setup.

MaxxDesign Exclusive Features:

• Multi-Chuck Rail System allows simultaneous actuation.
• 100% cross-compatible with MaxxMacro 54 and OEM System

MaxxMacro 70 Pneumatic Low Profile Chuck 30210 Rust Proof comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Pneumatic chuck for MaxxMacro holders.

MaxxDesign Exclusive Features:

• Air-Blast Z pad Cleaning
• Low Profile design

Product Information:

MaxxMacro 70 Pneumatic Low Profile Chuck 30210 Rust Proof is fully 100% cross-compatible with System 3R 3R-602.10-1 Pneumatic WEDM chucks. Designed for precision, it offers an accuracy of ±0.002 mm and features a low-profile design ideal for tight spaces. The chuck includes air-blast cleaning to maintain clean reference surfaces and supports fixed indexing at 4x90° for consistent positioning. Also compatible with System 3R models 3R-602.10-1 and 3R-602.10-1K.

MaxxMacro 70 Aluminum Low Profile Manual Chuck Extension 6" comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Vertical extension with manual chuck.

MaxxDesign Exclusive Features:

• Precision ground to ensure uniform height. This guarantees that when using multiple extensions, they all have the same height.
• Height accuracy is 0.008 mm (0.0003"), and XY accuracy is 0.002 mm.

MaxxMacro Automatic Drawbar 60510W Low Profile Stainless comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Drawbar compatible with any MaxxMacro pallet. Check the required type for the chuck you are using.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

MaxxMacro 60510W Low Profile Drawbar is 100% cross compatible System 3R Drawbar 3R-605.10 WEDM Drawbar Macro. MaxxMacro 60510W Lowprofile Drawbar includes the plastic clip, flushing o-ring and are machined ABCD all locations for precision seating of pallet. 100% cross compatible with System 3R Macro Tooling Systems 3R-605.10

MaxxMacro Manual Chuck Internal Repair Kit Rust Proof.

MaxxDesign Exclusive Features:

• High quality materials.
• Internal Repair kit

Product Information:

Complete internal upgrade kit for MaxxMacro 54 D75 manual chucks. New 2021 Version with re-engineered locking screw (5MM Allen) to eliminate that screw braking, In testing System 3R OEM screws break at 9nm Maxx Tooling break at 26nm. MaxxMacro 54 Manual Chuck Internal Mechanism kit will upgrade the System 3R 3R-600.24 OEM Chucks to our MaxxMacro screw design.

MaxxMacro Junior Drawbar 40511 Stainless comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Drawbar compatible with any MaxxMacro pallet. Check the required type for the chuck you are using.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

MaxxMacro Drawbar Macro Junior 40511 Stainless is 100% cross compatible with System 3R 3R-405.11E MacroJunior. Cross compatible with System 3R Macro Jr Tooling Systems 3R-405.11 3R-405.11E 3R-405.11EE

MaxxMacro 54 Manual QuickChuck Chuck with 20mm Lathe Round Connection Rod comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Small QuickChuck with lathe adapter, designed for turning applications.

MaxxDesign Exclusive Features:

• High quality materials.
• Pin concentricity ±0.0002" for turning applications.

Product Information:

MaxxMacro 54 Manual QuickChuck Chuck with 20mm Lathe Round Connection Rod is fully 100% cross-compatible with System 3R Macro tooling. With an exceptional accuracy of 0.002 mm, it is specifically designed for turning applications, featuring a pin concentricity to the chuck center of ±0.0002" to ensure precise and reliable performance.

MaxxMacro 54 Multi 2 QuickChuck Chuck Precision Rail comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Precision rail with multiple chucks for easier installation and a more space-saving setup.

MaxxDesign Exclusive Features:

• Multi-chuck system on a common mounting plate for compact setups.
• Supports multiple operations to increase productivity.

MaxxMacro Manual Chuck Premium Locking Screw Replacement comes fully assembled and ready to use. Replacement MaxxMacro manual chucks with Allen.

MaxxDesign Exclusive Features:

• Durable replacement locking screw for MaxxMacro chucks.
• Upgrade available for OEM chucks to reduce screw breakage.

MaxxMacro 54 Multi 4 QuickChuck Chuck Precision Rail comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Precision rail with multiple chucks for easier installation and a more space-saving setup.

MaxxDesign Exclusive Features:

• Multi-chuck system on a common mounting plate for compact setups.
• Supports multiple operations to increase productivity.

MaxxMagnum Pneumatic Chuck Manual Short Drawbar 680192 comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Pneumatic table chuck.

MaxxDesign Exclusive Features:

• Includes Air-blast cleaning of the Z-references
• 100% cross-compatible with OEM system

Product Information:

MaxxMagnum Pneumatic Chuck Manual Short Drawbar 680192 is 100% cross compatible with System 3R 3R-680.10-2 3R-680.19-2 3R-680.10-2A Macro Magnum Pneumatic chucks. MaxxMagnum Pneumatic Chuck Manual Short Drawbar 680192 is rust resistant and provides the best balance of durability , accuracy and design. Repeatability: 0.002 mm (0.00008“) Does not include the sealing ring; we offer it as a spare item.

MaxxMagnum Pneumatic Chuck Manual Short Drawbar with Mounting Plate 680245 comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Pneumatic table chuck.

MaxxDesign Exclusive Features:

• Includes Air-blast cleaning of the Z-references
• 100% cross-compatible with OEM system

Product Information:

MaxxMagnum Pneumatic Low Profile 680245 Chuck 160 x 245 Base Plate is 100% cross compatible with System 3R 3R-680.10-2A Macro Magnum Low Profile Pneumatic Chucks. MaxxMagnum Pneumatic Chuck Manual Short Drawbar with Mounting Plate 680245 is rust resistant and provides the best balance of durability , accuracy and design. Repeatability: 0.002 mm (0.00008“) Does not include the sealing ring; we offer it as a spare item.

MaxxMacro Automatic Drawbar 60514 Stainless Performance comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Drawbar compatible with any MaxxMacro pallet. Check the required type for the chuck you are using.

MaxxDesign Exclusive Features:

• Precision-machined at all ABCD points for accurate pallet seating
• Includes flushing O-ring and plastic clip for easy setup and maintenance

Product Information:

The MaxxMacro Drawbar Automatic 60514 Stainless Performance is engineered for precision, repeatability, and automation-ready performance. It is 100% cross compatible with System 3R Macro Combi tooling systems, including 3R-605.14 and 3R-605.14E. Designed for seamless integration into automated environments, it features a junior interface for gripper and magazine handling. Each drawbar is machined at all ABCD locations for exact seating and reliable toolchanging. It also comes with a plastic clip and flushing O-ring to ensure smooth operation in high-performance machining and EDM applications. This model functions identically to the MaxxMacro Drawbar Automatic 60514 Stainless Performance.

MaxxMacro 54 Manual QuickChuck Angle Adapter 90 Degree comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. For easy transition from vertical to horizontal.

MaxxDesign Exclusive Features:

• Includes a bar actuated MaxxMacro 54 QuickChuck
• Positional accuracy to data. 004mm

Product Information:

MaxxMacro 54 Manual QuickChuck with 90° Adapter for horizontal mounting of Macro holders. Allows user to quickly go from vertical to horizontal position while maintaining location and accuracy.

MaxxMacro 54 Aluminum Manual Chuck Horizontal Extension 12" comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Horizontal extension with manual chuck.

MaxxDesign Exclusive Features:

• High quality materials: Chuck and Pallet are 440C 57-60HRC rust proof design.
• Extension: Aluminum 12" Center to Center

Product Information:

Note due to the limitations of aluminum it is recommended the user master the extension and adjust provided data once the MaxxMacro Horizontal Chuck Extension is installed on your equipment.

MaxxMacro 70 Pneumatic Chuck 6001030 with Mounting Plate CNC Table comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Pneumatic chuck for permanent mounting on the machine table with universal mounting plate.

MaxxDesign Exclusive Features:

• 145mm x 100mm base plate
• Standard Z pad Air Clean Function

Product Information:

MaxxMacro 70 Pneumatic Chuck 6001030 with Mounting Plate CNC Table is fully 100% cross-compatible with System 3R Chuck 3R-610.46-30, making it an ideal choice for both manual and automated machining setups. Designed to meet demanding automation requirements, this chuck offers reliable performance and seamless integration. It comes with a 145mm x 100mm base plate and includes a standard Air Clean function that can be operated manually with an air gun or through an automated control system, ensuring clean and precise setups every time.

MaxxMacro 54 Manual Angle Adapter 90 Degree Adapter 6" with 70 Performance Pallet comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. For horizontal mounting of MaxxMacro holders.

MaxxDesign Exclusive Features:

• Allows user to quickly go from vertical to horizontal position while maintaining location and accuracy.
• Positional accuracy to data. 005mm

Product Information:

MaxxMacro 54 Manual Chuck 90 Degree Adapter 6" with 70 Performance Pallet is a over sized reversed model to the Maxx Tooling Standard 90 Degree Holder. This holder has also been reversed to our standard allowing you to increase the distance from your head to the burn location. Allows user to quickly go from vertical to horizontal position while maintaining location and accuracy.

MaxxMacro 54 to Maxx-ER 50 System Adapter comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. QuickChuck adapter for an easy transition from MaxxMacro to Maxx-ER.

MaxxDesign Exclusive Features:

• 100% cross-compatible with System 3R and Erowa ITS systems
• Repeatability .003MM

Product Information:

MaxxMacro 54 to Maxx-ER 50 System Chuck Adapter allows users to go from MaxxMacro 54 (System 3R Macro System) to Maxx-ER 50 (Erowa ITS 50 System).

MaxxMacro 70 Low Profile Manual Chuck with Mounting Plate CNC comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Three ground faces for vertical or horizontal mounting on the machine table.

MaxxDesign Exclusive Features:

• Quick Mounting with Standard Clamps
• 90° Indexing with Ground Reference Side

Product Information:

MaxxMacro 70 Low Profile Manual Chuck with Mounting Plate CNC is designed for fast, hassle-free mounting directly onto any CNC machine table using standard machine clamps—no special fixtures or plates required. One side is precision-ground for easy horizontal setup, making it ideal for grinding or laydown operations. The chuck features a 90° indexing function, enabling consistent and repeatable positioning from the same reference surface.

MaxxMacro 70 Low Profile Manual Chuck Angle Adapter Rust Proof comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Vertical extension with manual chuck and adjustable angle.

MaxxDesign Exclusive Features:

• Full stainless mechanisms for rust prevention in full WEDM Submersion
• Angles can be set continuously from 0 to 90°

Product Information:

MaxxMacro 70 Low Profile Manual Chuck Variable Angle Adapter Rust Proof is great for burning large driver pockets. Complete with MaxxMacro 70 Performance Pallet and a MaxxMacro 70 Manual Chuck (Rust Proof). The heavy-duty construction and rust-proof features make it a reliable tool, making it ideal for industrial use and perfect for burning large driver pockets. For use on all MaxxMacro 70MM and 54MM Macro pallets 100% cross compatible with System 3R Macro systems To set the angle with precision, you can use an angle gauge or a sine plate for accurate measurements. These tools will help you achieve the desired angle effectively.

MaxxMacro 70 Pneumatic Chuck 6001430 comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

System 3R Compatible MAXX Brand Pneumatic Chuck Macro compatible

MX-6031 is a Pneumatic chuck for mounting directly on the machine spindle. In application it can also be used in fixed fixture where as pneumatic function is required

Similar to 3R-600.14-30 but is not low profile and uses the long drawbar

Maxx Tooling System 3R compatible chucks come standard with Air Clean function

Product Details:

MaxxMacro 54 Manual Chuck with Adjustable Base comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. For mounting on the machine spindle or onto a 5-axis machine table. Adjustments are rotational and perpendicular.

MaxxDesign Exclusive Features:

• Adjustable Base for Precise Alignment
• Includes insulator for EDM use

Product Information:

The MaxxMacro 54 Manual Chuck with Adjustable Base is an ideal solution for permanent mounting on machine spindles or 5-axis machine tables, especially in precision applications. Its adjustable mounting plate is engineered to provide maximum flexibility during installation, allowing both rotational and perpendicular alignment adjustments—crucial for achieving optimal positioning on EDM spindles or 5-axis CNC tables. For EDM applications, the system includes an insulator plate to prevent electrical conductivity. This component can be omitted when used on CNC or non-EDM machines, making the setup adaptable to a range of machining environments.

MaxxMacro 54 Manual QuickChuck Chuck comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. General-use QuickChuck with 70x40mm mounting holes

MaxxDesign Exclusive Features:

• Easy QuickChuck Bar Action.
• 100% cross-compatible with OEM system

MaxxMacro 70 Pneumatic Chuck 6001030 with Adjustable Base comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Pneumatic chuck for permanent mounting on the machine spindle or onto the machine table or as a lathe chuck.

MaxxDesign Exclusive Features:

• Adjustable Base for Precise Alignment.
• Includes insulator for EDM use.

Product Information:

MaxxMacro 70 Pneumatic Chuck 6001030 with Adjustable Base is ideal for attachment to EDM machines and machine spindles. Its adjustable mounting plate is engineered to provide maximum flexibility during installation, allowing both rotational and perpendicular alignment adjustments. For EDM applications, the system includes an insulator plate to prevent electrical conductivity. This component can be omitted when used on CNC or non-EDM machines, making the setup adaptable to a range of machining environments.

MaxxMacro Combi Drawbar 40516 Stainless comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Drawbar compatible with any MaxxMacro pallet. Check the required type for the chuck you are using.

MaxxDesign Exclusive Features:

• Precision machined for toolchanger compatibility and repeatable pallet seating
• Rust-resistant stainless construction with integrated flushing capability

Product Information:

The MaxxMacro Drawbar Macro Combi 40516 is a high-performance stainless steel drawbar engineered for precision, durability, and full automation compatibility. It is 100% cross compatible with System 3R tooling systems, including 3R-405.16E, 3R-405.16, and 3R-405.16EE. Each drawbar is machined at all ABCD locations to ensure secure seating and accurate alignment in high-speed CNC and EDM environments. It includes a plastic clip and flushing O-rings for optimal flushing performance and long-term reliability.

MaxxMacro 54 Aluminum Manual Chuck Vertical Extension 100mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Vertical extension with manual chuck.

MaxxDesign Exclusive Features:

• Precision ground to ensure uniform height. This guarantees that when using multiple extensions, they all have the same height.
• Height accuracy is 0.008 mm (0.0003"), and XY accuracy is 0.002 mm.

MaxxMacro 54 Stainless Manual QuickChuck Chuck Rust Proof WEDM comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. QuickChuck with a compact 2" footprint, rust-proof, and highly versatile.

MaxxDesign Exclusive Features:

• Compact 56 mm (2") square design.
• Optimized for submerged WEDM environments

Product Information:

MaxxMacro 54 Manual QuickChuck Rust Proof WEDM is specially engineered to overcome the size limitations of standard MaxxMacro chucks. Featuring a compact 56 mm (2") square footprint, this chuck opens up new possibilities for using MaxxMacro tooling in space-constrained environments—without compromising precision or performance. Designed for Wire EDM (WEDM) applications, it includes fully stainless-steel internal mechanisms to ensure rust resistance and long-term reliability, even during full submersion operations.

MaxxMagnum Manual Chuck Internal Repair Kit.

MaxxMacro 70 Pneumatic Chuck Internal Repair Kit Rust Proof. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxMacro 54 Manual Chuck 60024 Rust Proof WEDM comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Rust resistant manual chuck designed for permanent mounting.

MaxxDesign Exclusive Features:

• Full Stainless 440C Construction with Rust-Proof Components
• Ground back face for mounting on the machine spindle.

MaxxMacro 54 Manual Angle Adapter 90 Degree Adapter comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. For horizontal mounting of MaxxMacro holders.

MaxxDesign Exclusive Features:

• Includes a MaxxMacro Manual Chuck
• Positional accuracy to data. 004mm

Product Information:

MaxxMacro 54 Manual Chuck 90 Degree Adapter allows user to quickly go from vertical to horizontal position while maintaining location and accuracy. Rounded corners allowing closer access to burn locations without the worry of corners tagging.

MaxxMacro 54 Aluminum Manual Chuck Vertical Extension 6" comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Vertical extension with manual chuck.

MaxxDesign Exclusive Features:

• Precision ground to ensure uniform height. This guarantees that when using multiple extensions, they all have the same height.
• Height accuracy is 0.008 mm (0.0003"), and XY accuracy is 0.002 mm.

MaxxMacro Short Manual Drawbar 6052 Stainless comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Drawbar compatible with any MaxxMacro pallet. Check the required type for the chuck you are using.

MaxxDesign Exclusive Features:

• Precision-machined at all ABCD points for accurate pallet seating
• Includes flushing O-ring and plastic clip for easy setup and maintenance

Product Information:

The MaxxMacro Drawbar Short Manual 6052 Stainless is a high-precision upgrade fully 100% cross compatible with System 3R Macro drawbars, including 3R-605.2RS, 3R-605.2EE, 3R-605.2E, and 3R-605.2. Engineered for enhanced stability, accuracy, and long-term performance, this drawbar is an ideal choice for demanding industrial and machining environments. Each drawbar includes a plastic clip, flushing O-ring, and is machined ABCD at all locations for exact pallet seating and repeatable precision.

MaxxMacro Long Automatic Drawbar 605 Stainless comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Drawbar compatible with any MaxxMacro pallet. Check the required type for the chuck you are using.

MaxxDesign Exclusive Features:

• Precision-machined at all ABCD points for accurate pallet seating
• Includes flushing O-ring and plastic clip for easy setup and maintenance

Product Information:

The MaxxMacro Drawbar Long Automatic 605 Stainless is a high-performance upgrade that is 100% cross compatible with System 3R Macro drawbars, including 3R-605.1E, 3R-605.1, 3R-605.1EE, 3R-605.1RS, and 3R-605.4. Designed for use with automatic toolchangers, it features enhanced stability, precision, and durability, making it ideal for demanding CNC and EDM operations. Each drawbar comes equipped with a plastic clip, flushing O-rings, and is machined at all ABCD positions to ensure proper engagement with toolchanger fingers and repeatable pallet seating.

MaxxTooling Stainless ER20 Collet Replacement Locking Nut can be used to complement products and product lines for various systems, such as MaxxMacro, Maxx-ER, and OEM manufacturers like System 3R and Erowa. Standard Locking Nut for MaxxMacro collet chucks.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

MaxxMacro 54 ER20 Collet Chuck Locking Nut replacement nut for MaxxMacro Collet Chuck, ensuring secure and accurate operation. This nut works on all MaxxMacro, Maxx-ER - ER20 Collet chucks.

MaxxTooling Stainless ER20 Collet Replacement Locking Nut Rust Proof can be used to complement products and product lines for various systems, such as MaxxMacro, Maxx-ER, and OEM manufacturers like System 3R and Erowa. Locking Nut for MaxxMacro collet chucks. Chrome finish, rust-proof. Fits all MaxxMacro ER20 chucks.

MaxxDesign Exclusive Features:

• Rust-proof chrome finish for long-term corrosion resistance
• Compatible with all MaxxMacro and Maxx-ER ER20 collet chucks
  

Product Information:

The MaxxTooling Stainless ER20 Collet Replacement Locking Nut Rust Proof is a high-quality replacement nut designed to ensure secure and accurate performance of your MaxxMacro and Maxx-ER ER20 collet chucks. Engineered for durability, this locking nut features a rust-proof, corrosion-resistant chrome finish and is fully compatible with all MaxxMacro ER20 collet chuck systems.

Made from high-strength 4CR13 SUS stainless steel, it delivers long-lasting reliability even in demanding machining environments.

MaxxMacro 54 User Kit Manual Chuck 62841S MaxxMacro starter kit with Manual Chuck and all essentials for setting up your milling center.

MaxxDesign Exclusive Features:

• 100% Cross Compatible with OEM System.
• Includes all essential components to get started with the system.

Product Information:

MaxxMacro 54 Manual Chuck User Kit 62841S is fully compatible with System 3R system. Similar to 3R-628.41-S. This innovative workholding system is designed to improve efficiency and lower production costs, offering a reliable and cost-effective alternative to current machining solutions. MaxxMacro 54 Manual Chuck User Kit 62841S includes:

• (x1) MaxxMacro 54 Manual Chuck with Mounting Plate CNC Manual (MM-MCMPS001 / MX-0CNCM);
• (x1) MaxxMacro 54 Stainless Control Ruler High Performance (MM-MA54S001 / MX-CH656);
• (x6) MaxxMacro Pallet 54 Stainless Cast Plated (MM-PA54S013 / MX-0013M-1);
• (x4) MaxxMacro 54 Aluminum Slotted Electrode Holder U25 (MM-US54A025 / MX-3RU25BUD);
• (x4) MaxxMacro 54 Aluminum Pocket Electrode Holder S25 (MM-SP54A025 / MX-3RSAL-25);
• (x2) MaxxMacro 54 17,5mm Spacer (MM-SC54S000 / MX-3R658SP);
• (x3) MaxxMacro Drawbar 6052 Short Manual Stainless (MM-DRWBR101 / MX-STDR3R-1);
• (x3) MaxxMacro Drawbar Long Automatic 605 Stainless (MM-DRWBR201 / MX-605DB-10) or MaxxMacro Drawbar Macro Combi 40516 Stainless (MM-DRWBR110 / MX-40516).

MaxxMacro 54 User Kit QuickChuck 62831S MaxxMacro starter kit with QuickChuck and all necessary products to set up your milling center.

MaxxDesign Exclusive Features:

• 100% Cross Compatible with OEM System.
• Includes all essential components to get started with the system.

Product Information:

MaxxMacro User Kit 62831S is fully compatible with System 3R system. Similar to 3R-628.31-S. This innovative workholding system is designed to improve efficiency and lower production costs, offering a reliable and cost-effective alternative to current machining solutions MaxxMacro User Kit 62831S includes:

• (x1) MaxxMacro 54 Manual Quick Chuck Rust Proof WEDM (MM-QC54R000 / MX-3RM56W);
• (x6) MaxxMacro Pallet 54 Performance Rust Proof with .250 Dowels (MM-PA54W250 / MX-0013M-1D25) or with 6mm Dowels (MM-PA54W006 / MX-0013M-1D6);
• (x1) MaxxMacro 54 Stainless Control Ruler High Performance (MM-MA54S001 / MX-CH656);
• (x3) MaxxMacro 54 Aluminum Slotted Electrode Holder U25 (MM-US54A025 / MX-3RU25BUD);
• (x3) MaxxMacro 54 Aluminum Pocket Electrode Holder S25 (MM-SP54A025 / MX-3RSAL-25);
• (x3) MaxxMacro Drawbar 6052 Short Manual Stainless (MM-DRWBR101 / MX-STDR3R-1);
• (x3) MaxxMacro Drawbar Long Automatic 605 Stainless (MM-DRWBR201 / MX-605DB-10) or Drawbar Macro Combi 40516 Stainless (MM-DRWBR110 / MX-40516).

MaxxMacro 54 Aluminum Manual QuickChuck Vertical Extension 12" comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Vertical extension with QuickChuck.

MaxxDesign Exclusive Features:

• Precision ground to ensure uniform height. This guarantees that when using multiple extensions, they all have the same height.
• Height accuracy is 0.008 mm (0.0003"), and XY accuracy is 0.002 mm.

MaxxMacro 54 Aluminum Manual QuickChuck Vertical Extension 10" comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Vertical extension with QuickChuck.

MaxxDesign Exclusive Features:

• Precision ground to ensure uniform height. This guarantees that when using multiple extensions, they all have the same height.
• Height accuracy is 0.008 mm (0.0003"), and XY accuracy is 0.002 mm.