Uncategorized

High-precision central screw designed specifically for the 80x120 mm MaxxVise Self-Centering Vise.

Symmetrical jaw with an 80 mm width for MaxxVise Self-Centering Vise. This design allows the same jaw to be used on both the right and left nuts.

MaxxMacro 70 Stainless Control Ruler Master WEDM Master for horizontal Macro chucks. One long side ground to the Macro references. Supplied with engraved dimensions in the X-, Y- and Z-directions.

MaxxDesign Exclusive Features:

• Master for horizontal Macro chucks.
• 100% cross-compatible with OEM system

MaxxMacro 70 Stainless Control Ruler Master WEDM Master for horizontal Macro chucks. One long side ground to the Macro references. Supplied with engraved dimensions in the X-, Y- and Z-directions.

MaxxDesign Exclusive Features:

• Master for horizontal Macro chucks.
• 100% cross-compatible with OEM system

Precision-machined threaded nut designed for the MaxxVise Self-Centering Vise.

Precision-machined threaded nut designed for the MaxxVise Self-Centering Vise.

Precision-machined threaded nut designed for the MaxxVise Self-Centering Vise.

Precision-machined threaded nut designed for the MaxxVise Self-Centering Vise.

High-precision central screw designed specifically for the 80x120 mm Self-Centering Vise. It features opposing right-hand and left-hand threads to drive both nuts simultaneously, enabling smooth, accurate, and repeatable self-centering jaw movement. Built for long-lasting performance in high-precision machining setups.

Symmetrical jaw with an 80 mm width for MaxxVise Self-Centering Vise. This design allows the same jaw to be used on both the right and left nuts.

Includes 3 pair of jaws and 1 set of screws.

Compatible with Maxx-ER and MaxxMacro UnoSet vises.

MaxxMacro 239445 Double Side MXRuler Ruler 445mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Double-sided rulers are available in various lengths (-XXX), to match different machines. The cross-section is matched to the length to ensure optimal stability. With these rulers, accessories can be clamped on both sides of the ruler.

MaxxDesign Exclusive Features:

• Double-sided design for flexible setups, with enhanced rigidity thanks to upgraded dimensions: 86 mm wide (up from 60 mm) and 36 mm high (up from 30 mm)
• Compatible with any reference element (requires MaxxMacro A2392 MXRuler WEDM Sliding 86mm Clamps)

Product Information:

The MaxxMacro MXRuler is the most versatile setup for your Wire EDM machine. It is available in various lengths (-XXX) to match different machine sizes, with each length paired with a specifically designed cross-section to ensure optimal stability and performance. The MXRuler is compatible with a wide range of accessories, allowing for quick and easy mounting of workpieces of various sizes and shapes.

The MaxxMacro MXRuler includes the following items:

• 1 MaxxMacro Double MXRuler
• 2 MaxxMacro Ruler Eccentric Endstop (MM-RUACR214)
• 2 pieces of MaxxMacro MXRuler A239 WEDM Clamps non-rail (MM-RUACA103)
• 4 pieces of MaxxMacro MXRuler 23922 WEDM Stepped Support Tab (MM-RUACR203)
• 4 pieces of MaxxMacro MXRuler 23925 WEDM Standard 60mm Support Tab (MM-RUACR201)
• 4 pieces of MaxxMacro MXRuler 239241 WEDM Basic Toe Clamps (MM-RUACR205)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Mitsubishi MP1200
• Mitsubishi MV1200R
• Mitsubishi MD Pro 3
• Mitsubishi NA12
• Mitsubishi NA1200
• Mitsubishi NA1200P
• Mitsubishi MV1200S
• Charmilles RoboFil 330
  
• Excetek V400G
  
• Fanuc alpha C400iB
• Fanuc alpha C400iC
  
• Sodick AL400G
• Sodick AL400P
• Sodick ALC400G
• Sodick ALN400G
• Sodick ALN400Q
• Sodick VL400Q
• Sodick AG400L
• Sodick AQ400L
• Sodick SL400G
• Sodick SL400Q
• Sodick SLC400G

Vertical setup:

• Fanuc alpha 1iD
• Fanuc alpha 1iDP
• Fanuc alpha 1iE
• Fanuc alpha C600iA
• Fanuc alpha C600iB
• Fanuc alpha C600iC
• Mitsubishi BA24
• Mitsubishi NA24
• Mitsubishi NA2400
• Mitsubishi NA2400P
• Mitsubishi MP2400
• Mitsubishi MV2400R / R Z+
• Mitsubishi MV2400S Z+
  
• Makino DUO64
• Makino SP64 (yr 2005-)

MaxxMacro 239645 Double side MXRuler Ruler 645mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Double-sided rulers are available in various lengths (-XXX), to match different machines. The cross-section is matched to the length to ensure optimal stability. With these rulers, accessories can be clamped on both sides of the ruler.

MaxxDesign Exclusive Features:

• Double-sided design for flexible setups, with enhanced rigidity thanks to upgraded dimensions: 86 mm wide (up from 60 mm) and 36 mm high (up from 30 mm)
• Compatible with any reference element (requires MaxxMacro A2392 MXRuler WEDM Sliding 86mm Clamps)

Product Information:

The MaxxMacro MXRuler is the most versatile setup for your Wire EDM machine. It is available in various lengths (-XXX) to match different machine sizes, with each length paired with a specifically designed cross-section to ensure optimal stability and performance. The MXRuler is compatible with a wide range of accessories, allowing for quick and easy mounting of workpieces of various sizes and shapes.

The MaxxMacro MXRuler includes the following items:

• 1 MaxxMacro Double MXRuler
• 2 MaxxMacro Ruler Eccentric Endstop (MM-RUACR214)
• 2 pieces of MaxxMacro MXRuler A239 WEDM Clamps non-rail (MM-RUACA103)
• 6 pieces of MaxxMacro MXRuler 23922 WEDM Stepped Support Tab (MM-RUACR203)
• 4 pieces of MaxxMacro MXRuler 23925 WEDM Standard 60mm Support Tab (MM-RUACR201)
• 6 pieces of MaxxMacro MXRuler 239241 WEDM Basic Toe Clamps (MM-RUACR205)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Fanuc alpha C600iA
  
• Fanuc alpha C600iB
  
• Fanuc alpha C600iC
  
• Fanuc alpha 1iD
  
• Fanuc alpha 1iDP
  
• Fanuc alpha 1iE
  
• Mitsubishi MP2400
  
• Mitsubishi MV2400R / R Z+
  
• Mitsubishi MV2400S
  
• Mitsubishi MV2400S Z+
  
• Mitsubishi BA24
  
• Mitsubishi NA24
  
• Mitsubishi NA2400
  
• Mitsubishi NA2400P
  
• Mitsubishi PX05
  
• Sodick AL600G
  
• Sodick ALC600G
  
• Sodick ALN600G
  
• Sodick ALN600Q
  
• Sodick VL600Q
  
• Sodick AG600L
  
• Sodick AQ600L
• Sodick AQ600
  
• Sodick SL600G
  
• Sodick SL600P
  
• Sodick SL600Q
  
• Sodick SLC600G
  
• YCM Impuls 6

Vertical setup:

• Fanuc alpha C800iB
  
• Mitsubishi MV4800R
  
• Mitsubishi MV4800S

MaxxMacro 2921 SuperVise WEDM Vise comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. For clamping rectangular workpieces up to 77 mm.

MaxxDesign Exclusive Features:

• 100% cross-compatible with OEM system
• Mounts on Mounting Head, HP, Magnum or MacroTwin leveling adapter.

Product Information:

MaxxMacro 2921 WEDM SuperVise is 100% cross compatible with System 3R. This makes it easy to perform compound machining operations quickly and accurately. Plus, it enables seamless integration of machining operations with other systems and parts. MaxxMacro 2921 WEDM SuperVise for clamping rectangular workpieces up to 77 mm. Mounts on HP, Magnum or MacroTwin leveling adapter. Tightening torque 3 Nm.

MaxxMacro 2922 SuperVise WEDM Vise comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. For clamping rectangular workpieces up to 100 mm.

MaxxDesign Exclusive Features:

• 100% cross-compatible with OEM system
• Mounts on Mounting Head, HP, Magnum or MacroTwin leveling adapter.

Product Information:

MaxxMacro 2922 WEDM SuperVise is 100% cross compatible with System 3R. This makes it easy to perform compound machining operations quickly and accurately. Plus, it enables seamless integration of machining operations with other systems and parts. MaxxMacro 2922 WEDM SuperVise for clamping rectangular workpieces up to 100 mm. Tightening torque 3 Nm.

MaxxMacro 2923D Double SuperVise WEDM Vise comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. For collision-free clamping of both rectangular and round workpieces (14-45 mm and Ø3-15 mm respectively).

MaxxDesign Exclusive Features:

• 100% cross-compatible with OEM system
• Mounts on Mounting Head, HP, Magnum or MacroTwin leveling adapter.

Product Information:

MaxxMacro 2923D WEDM Double SuperVise is 100% cross compatible with System 3R. This makes it easy to perform compound machining operations quickly and accurately. Plus, it enables seamless integration of machining operations with other systems and parts. MaxxMacro 2923D WEDM Double SuperVise for collision-free clamping of both rectangular and round workpieces (14-45 mm and Ø 3-15 mm respectively). Total clamping range, 60 mm (to be split between two workpieces). Alternatively, dismount the double jaw and use as a regular MX-2923 (3R-292.3) vise for rectangular workpieces (0-100 mm). Tightening torque 7 Nm.

MaxxMacro 2923S Universal WEDM Holder comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Holder for round workpieces up to 90 mm, or rectangular workpieces 100x90 mm.

MaxxDesign Exclusive Features:

• 100% cross-compatible with OEM system
• Mounts on Mounting Head, HP, Magnum or MacroTwin leveling adapter.

Product Information:

MaxxMacro 2923S WEDM Universal Holder is 100% cross compatible with System 3R. This makes it easy to perform compound machining operations quickly and accurately. Plus, it enables seamless integration of machining operations with other systems and parts. MaxxMacro 2923S WEDM Universal Holder for round workpieces up to 90 mm, or rectangular workpieces 100x90 mm. Tightening torque 4 Nm. Recommended maximum workpiece weight 7 kg

MaxxTooling Stainless ER40 Collet Replacement Locking Nut can be used to complement products and product lines for various systems, such as MaxxMacro, Maxx-ER, and OEM manufacturers like System 3R and Erowa.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

MaxxMacro 54 ER40 Collet Chuck Locking Nut replacement nut for MaxxMacro Collet Chuck, ensuring secure and accurate operation. This nut works on all MaxxMacro, Maxx-ER - ER40 Collet chucks.

MaxxMacro 262HP Chucking WEDM Leveling Adapter comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. For mounting SuperVice, a holder or a fixture in the MaxxMacro system.

MaxxDesign Exclusive Features:

• High quality materials (440C and Rust Proof)
• 100% cross-compatible with OEM system

Product Information:

MaxxMacro 262HP Leveling adapter WEDM Chucking is 100% cross compatible with System 3R rail Systems. This Adapter is designed to function with WEDM chucks and not Dovetails.

MaxxTooling Stainless ER16 Collet Replacement Locking Nut can be used to complement products and product lines for various systems, such as MaxxMacro, Maxx-ER, and OEM manufacturers like System 3R and Erowa. Standard Locking Nut for MaxxMacro collet chucks.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

MaxxMacro 54 ER16 Collet Chuck Locking Nut replacement nut for MaxxMacro Collet Chuck, ensuring secure and accurate operation. This nut works on all MaxxMacro, Maxx-ER - ER16 Collet chucks.