MXRuler Accessory

MaxxMacro 2391 Double Ruler Vise MXRuler Accessory WEDM comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Movable jaws for mounting two rectangular workpieces at the same time. Detachable Z-support tabs ensure simple setting-up.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

MaxxMacro 2391 MXRuler WEDM Ruler Vise features movable jaws for an extensive range of rectangular items and detachable Z-support tabs to ensure simple setting-up. To be mounted on ruler MX-239XXX. MaxxMacro 2391 MXRuler WEDM Ruler Vise is fully compatible with System 3R ruler system. Recommended maximum workpiece weight 7 kg. Tightening torque 8 Nm Supplied with two MaxxMacro 23926 MXRuler WEDM Zero-line support tab

MaxxMacro 2611 Adjustable Support MXRuler Accessory WEDM comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. For mounting directly on the machine table.

MaxxDesign Exclusive Features:

• High quality materials: Full 440C rust proof design.
• Adjustable length 35-135 mm.

MaxxMacro 2301 Clamping kit M6 MXRuler Accessory WEDM comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. For clamping workpieces on MXrulers, etc.

MaxxDesign Exclusive Features:

• Complete M6 clamping kit for securing workpieces.
• Compatible with MaxxMacro MXRuler and other fixturing systems

Product Information:

MaxxMacro 2301 MXRuler WEDM Clamping kit M6 provides a full set of hardware to complement your MaxxMacro MXRuler, including: MaxxMacro 239241 Basic Toe Clamps MXRuler Accessory WEDM MM-RUACR205; MaxxMacro Vise Spacer 50 mm WEDM Replacement MM-WERPW001; MaxxTooling Torque Wrench for Allen Inserts (7Nm) Spare Part MX-TRWRX007; MaxxTooling Double Side Open Wrench 10mm Spare Part MX-DSWRX010; SHCS M6x1x50mm; SHCS M6x1x40mm; SHCS M6x1x30mm; SHCS M6x1x20mm; SHCS M6x1x10mm; SSFP M6x1x50mm; SSFP M6x1x30mm; SSFP M6x1x10mm; Allen Key 5mm

MaxxMacro Rail Clamps Screw Replacement MXRuler Accessory comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

MaxxMacro MXRuler WEDM Rail Clamps Screw Replacement for both MaxxMacro MXRuler A2391 WEDM 60mm Clamps and MaxxMacro MXRuler A2392 WEDM 86mm Clamps.

MaxxMacro Eccentric Endstop MXRuler Accessory WEDM comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

The MaxxMacro Ruler Eccentric Endstop functions as a precise position stop on the MXRuler, ensuring accurate alignment for workpieces.

Supplied in sets of 2.

MaxxMacro 2301 Clamping kit M6 MXRuler Accessory WEDM comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. For clamping workpieces on MXrulers, etc.

MaxxDesign Exclusive Features:

• Complete M6 clamping kit for securing workpieces.
• Compatible with MaxxMacro MXRuler and other fixturing systems

Product Information:

MaxxMacro 2301 MXRuler WEDM Clamping kit M6 provides a full set of hardware to complement your MaxxMacro MXRuler, including: MaxxMacro 239241 Basic Toe Clamps MXRuler Accessory WEDM MM-RUACR205; MaxxMacro Vise Spacer 50 mm WEDM Replacement MM-WERPW001; MaxxTooling Torque Wrench for Allen Inserts (7Nm) Spare Part MX-TRWRX007; MaxxTooling Double Side Open Wrench 10mm Spare Part MX-DSWRX010; SHCS M6x1x50mm; SHCS M6x1x40mm; SHCS M6x1x30mm; SHCS M6x1x20mm; SHCS M6x1x10mm; SSFP M6x1x50mm; SSFP M6x1x30mm; SSFP M6x1x10mm; Allen Key 5mm

MaxxMacro 2611 Adjustable Support MXRuler Accessory WEDM comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. For mounting directly on the machine table.

MaxxDesign Exclusive Features:

• High quality materials: Full 440C rust proof design.
• Adjustable length 35-135 mm.

MaxxMacro 2015A Angle shelf MXRuler Accessory WEDM comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Mounts directly on the machine table. For vertical mounting of a MaxxMacro chuck in the machine.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

MaxxMacro 2015A WEDM Angle shelf mounts directly on the machine table. For vertical mounting of a Macro chuck in the machine. Its design ensures maximum stability for precise and reliable accuracy. Enjoying the ease of installation without the need for further attachments. MaxxMacro 2015A WEDM Angle shelf is fully compatible with System 3R macro system. *Chuck not included

MaxxMacro 23926 Stepped 60mm Support Tab MXRuler Accessory WEDM (Set of 2) comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Support tab adjusted by -5 mm. For MXruler.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

MaxxMacro MXRuler 23926 WEDM Stepped 60mm Support Tab (Set of 2) for positioning workpieces 5 mm above machine zero line. This tab enables precise, accurate, and reliable positioning of workpieces, drastically reducing the time required for quality assurance in production processes. The MaxxMacro MX-23926 MXRuler WEDM Zero-line support tab is fully compatible with System 3R ruler system. Recommended maximum workpiece weight per tap 50 kg.

MaxxMacro 2015 Angle shelf MXRuler Accessory WEDM comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Mounts directly on the machine table. For vertical mounting of a MaxxMacro chuck or short reference element in the machine.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

MaxxMacro 2015 MXRuler WEDM Angle shelf mounts directly on the machine table. For vertical mounting of a Macro chuck or short reference element in the machine. Its design ensures maximum stability for precise and reliable accuracy. Enjoying the ease of installation without the need for further attachments.

MaxxMacro 239251 Standard Support Tab MXRuler Accessory WEDM (Set of 2) comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Support tab for MXruler.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

MaxxMacro MXRuler 239251 WEDM Standard Support Tab (Set of 2) for positioning workpieces on machine zero line +5mm. This tab enables precise, accurate, and reliable positioning of workpieces, drastically reducing the time required for quality assurance in production processes. Recommended maximum workpiece weight per tap 50 kg.

MaxxMacro 239241 Basic Toe Clamps MXRuler Accessory WEDM (Set of 2) comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Basic clamps for MXRuler, designed for use with tabs.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

The MaxxMacro 239241 MXRuler Basic WEDM Clamps work to secure workpieces onto the MXRuler with MaxxMacro's Zero-line support tab. MaxxMacro 239241 MXRuler Basic WEDM Clamps is 100% cross compatible with System 3R ruler These clamps are precision engineered and tested for accurate tool positioning, enabling repeatable and reliable machining results. M6 thread.

MaxxMacro 23925 Standard 60mm Support Tab MXRuler Accessory WEDM (Set of 2) comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Support tab for MXruler.

MaxxDesign Exclusive Features:

• Works with any MXRuler.
• Positions the workpiece 5 mm above the zero line without interfering with the lower head’s space.

MaxxMacro 23922 Stepped Support Tab MXRuler Accessory WEDM (Set of 2) comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Support tab adjusted by -5 mm. For MXruler.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

MaxxMacro MX-23922 MXRuler WEDM Zero-line support tab for positioning workpieces 5 mm above machine zero line. This tab enables precise, accurate, and reliable positioning of workpieces, drastically reducing the time required for quality assurance in production processes. Recommended maximum workpiece weight per tap 50 kg.

MaxxMacro A239 Clamps non-rail MXRuler Accessory WEDM (Set of 2) comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Clamps of aluminium for mounting a ruler directly on the machine table without reference elements.

MaxxDesign Exclusive Features:

• Works with any MXRuler.
• Allows easy and flexible direct mounting on any machine table.

MaxxMacro 225 Reference Stop MXRuler Accessory WEDM comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Can be moved infinitely along the entire reference element.

MaxxDesign Exclusive Features:

• Works with any MaxxMacro Reference Element.
• Can be moved infinitely along the entire reference element.